erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28961602  bytes 1969955442 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63563649  bytes 93437530980 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2388975  bytes 470643022 (470.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2388975  bytes 470643022 (470.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/05/13/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28961692  bytes 1969974514 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63563755  bytes 93437550246 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2389109  bytes 470662588 (470.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2389109  bytes 470662588 (470.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/05/13/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28961751  bytes 1969988060 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63563836  bytes 93437564831 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2389229  bytes 470680228 (470.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2389229  bytes 470680228 (470.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/05/13/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28961813  bytes 1970002466 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63563921  bytes 93437579738 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2389362  bytes 470699638 (470.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2389362  bytes 470699638 (470.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/05/13/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28961871  bytes 1970015940 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63563997  bytes 93437593969 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2389477  bytes 470716976 (470.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2389477  bytes 470716976 (470.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/05/13/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28961938  bytes 1970031952 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63564085  bytes 93437610345 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2389585  bytes 470732315 (470.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2389585  bytes 470732315 (470.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/05/13/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28962032  bytes 1970051542 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63564202  bytes 93437630552 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2389739  bytes 470753198 (470.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2389739  bytes 470753198 (470.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/05/13/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28962088  bytes 1970064913 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63564278  bytes 93437644754 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2389856  bytes 470770600 (470.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2389856  bytes 470770600 (470.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/05/13/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28962154  bytes 1970079663 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63564365  bytes 93437659891 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2389991  bytes 470790150 (470.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2389991  bytes 470790150 (470.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/05/13/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28962213  bytes 1970093254 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63564446  bytes 93437674371 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2390112  bytes 470807796 (470.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2390112  bytes 470807796 (470.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/05/13/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28962287  bytes 1970110786 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63564544  bytes 93437692897 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2390241  bytes 470825992 (470.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2390241  bytes 470825992 (470.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/05/13/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28962375  bytes 1970129963 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63564659  bytes 93437712904 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2390406  bytes 470847567 (470.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2390406  bytes 470847567 (470.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/05/13/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28962440  bytes 1970144004 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63564742  bytes 93437727690 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2390529  bytes 470865379 (470.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2390529  bytes 470865379 (470.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/05/13/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28962504  bytes 1970158442 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63564826  bytes 93437743669 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2390653  bytes 470884333 (470.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2390653  bytes 470884333 (470.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/05/13/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28962580  bytes 1970175900 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63564926  bytes 93437761926 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2390806  bytes 470907698 (470.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2390806  bytes 470907698 (470.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/05/13/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28962652  bytes 1970193577 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63565028  bytes 93437780805 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2390940  bytes 470926190 (470.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2390940  bytes 470926190 (470.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/05/13/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28962742  bytes 1970212880 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63565141  bytes 93437800719 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2391104  bytes 470947676 (470.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2391104  bytes 470947676 (470.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/05/13/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28962804  bytes 1970226646 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63565221  bytes 93437815280 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2391227  bytes 470965496 (470.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2391227  bytes 470965496 (470.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/05/13/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28964301  bytes 1970324335 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63569177  bytes 93443653846 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2391938  bytes 476646313 (476.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2391938  bytes 476646313 (476.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/05/13/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28964357  bytes 1970337762 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63569256  bytes 93443668310 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2392055  bytes 476663751 (476.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2392055  bytes 476663751 (476.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/05/13/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28964431  bytes 1970355268 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63569357  bytes 93443687064 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2392185  bytes 476682085 (476.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2392185  bytes 476682085 (476.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/05/13/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28964520  bytes 1970374552 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63569472  bytes 93443707190 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2392342  bytes 476703162 (476.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2392342  bytes 476703162 (476.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/05/13/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28964581  bytes 1970388191 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63569548  bytes 93443721432 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2392453  bytes 476720288 (476.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2392453  bytes 476720288 (476.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/05/13/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28964642  bytes 1970402557 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63569634  bytes 93443736479 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2392577  bytes 476739266 (476.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2392577  bytes 476739266 (476.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/05/13/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28964697  bytes 1970415972 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63569712  bytes 93443750849 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2392691  bytes 476756572 (476.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2392691  bytes 476756572 (476.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/05/13/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28964772  bytes 1970433576 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63569815  bytes 93443769789 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2392817  bytes 476774734 (476.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2392817  bytes 476774734 (476.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/05/13/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28964863  bytes 1970453028 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63569931  bytes 93443789993 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2392966  bytes 476795395 (476.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2392966  bytes 476795395 (476.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/05/13/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
b'Error on request'
Token e243aac39fb012c084cfefeb2a6a3641 is maybe invalid 
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28964920  bytes 1970466501 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63570010  bytes 93443804456 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2393086  bytes 476813085 (476.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2393086  bytes 476813085 (476.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/05/13/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28964985  bytes 1970481093 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63570097  bytes 93443819543 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2393212  bytes 476832213 (476.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2393212  bytes 476832213 (476.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/05/13/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28965039  bytes 1970494256 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63570172  bytes 93443833683 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2393324  bytes 476849355 (476.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2393324  bytes 476849355 (476.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/05/13/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28965127  bytes 1970516016 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63570278  bytes 93443853425 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2393451  bytes 476867589 (476.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2393451  bytes 476867589 (476.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/05/13/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28965217  bytes 1970535114 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63570395  bytes 93443873642 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2393611  bytes 476888868 (476.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2393611  bytes 476888868 (476.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/05/13/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28965271  bytes 1970548445 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63570470  bytes 93443887851 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2393722  bytes 476905982 (476.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2393722  bytes 476905982 (476.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/05/13/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28965337  bytes 1970563067 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63570560  bytes 93443903335 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2393846  bytes 476924936 (476.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2393846  bytes 476924936 (476.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/05/13/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28965395  bytes 1970576606 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63570632  bytes 93443917214 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2393954  bytes 476941688 (476.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2393954  bytes 476941688 (476.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/05/13/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28965470  bytes 1970594086 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63570734  bytes 93443936017 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2394077  bytes 476959572 (476.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2394077  bytes 476959572 (476.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/05/13/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28965563  bytes 1970612755 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63570854  bytes 93443956476 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2394243  bytes 476981354 (476.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2394243  bytes 476981354 (476.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/05/13/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28965622  bytes 1970627298 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63570933  bytes 93443971042 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2394359  bytes 476998704 (476.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2394359  bytes 476998704 (476.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/05/13/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28965682  bytes 1970641564 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63571016  bytes 93443985857 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2394472  bytes 477016932 (477.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2394472  bytes 477016932 (477.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/05/13/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28965735  bytes 1970654763 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63571092  bytes 93444000109 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2394580  bytes 477033890 (477.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2394580  bytes 477033890 (477.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/05/13/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28965812  bytes 1970672501 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63571197  bytes 93444019161 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2394706  bytes 477052028 (477.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2394706  bytes 477052028 (477.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/05/13/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28965880  bytes 1970687259 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63571289  bytes 93444034778 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2394848  bytes 477072113 (477.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2394848  bytes 477072113 (477.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/05/13/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28965958  bytes 1970704922 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63571386  bytes 93444053303 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2394972  bytes 477090115 (477.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2394972  bytes 477090115 (477.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/05/13/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28966021  bytes 1970719315 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63571470  bytes 93444068219 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2395099  bytes 477109297 (477.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2395099  bytes 477109297 (477.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/05/13/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28966078  bytes 1970732804 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63571549  bytes 93444082647 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2395215  bytes 477126693 (477.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2395215  bytes 477126693 (477.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/05/13/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28966136  bytes 1970746271 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63571628  bytes 93444097121 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2395332  bytes 477144171 (477.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2395332  bytes 477144171 (477.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/05/13/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28966206  bytes 1970763049 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63571723  bytes 93444113575 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2395437  bytes 477159979 (477.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2395437  bytes 477159979 (477.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/05/13/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28966287  bytes 1970781006 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63571825  bytes 93444132496 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2395573  bytes 477178606 (477.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2395573  bytes 477178606 (477.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/05/13/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28966349  bytes 1970795475 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63571911  bytes 93444147524 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2395693  bytes 477197340 (477.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2395693  bytes 477197340 (477.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/05/13/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28966404  bytes 1970808814 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63571990  bytes 93444161950 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2395812  bytes 477214882 (477.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2395812  bytes 477214882 (477.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/05/13/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28966455  bytes 1970821909 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63572066  bytes 93444176174 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2395922  bytes 477231920 (477.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2395922  bytes 477231920 (477.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/05/13/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28966535  bytes 1970840504 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63572177  bytes 93444195773 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2396066  bytes 477252214 (477.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2396066  bytes 477252214 (477.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/05/13/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28966619  bytes 1970858622 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63572284  bytes 93444215177 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2396210  bytes 477271343 (477.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2396210  bytes 477271343 (477.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/05/13/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28966681  bytes 1970872944 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63572369  bytes 93444230112 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2396325  bytes 477289793 (477.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2396325  bytes 477289793 (477.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/05/13/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28966736  bytes 1970886315 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63572448  bytes 93444244510 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2396440  bytes 477307099 (477.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2396440  bytes 477307099 (477.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/05/13/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28966789  bytes 1970899462 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63572524  bytes 93444258682 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2396552  bytes 477324241 (477.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2396552  bytes 477324241 (477.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/05/13/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28966875  bytes 1970918473 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63572640  bytes 93444278599 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2396689  bytes 477344245 (477.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2396689  bytes 477344245 (477.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/05/13/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28966956  bytes 1970936450 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63572746  bytes 93444297936 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2396829  bytes 477363132 (477.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2396829  bytes 477363132 (477.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/05/13/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28967017  bytes 1970950883 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63572829  bytes 93444312810 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2396956  bytes 477382328 (477.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2396956  bytes 477382328 (477.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/05/13/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28967072  bytes 1970964197 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63572904  bytes 93444327007 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2397072  bytes 477399724 (477.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2397072  bytes 477399724 (477.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/05/13/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28967137  bytes 1970981695 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63572994  bytes 93444342870 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2397195  bytes 477417580 (477.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2397195  bytes 477417580 (477.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28967225  bytes 1971000851 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63573107  bytes 93444362650 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2397338  bytes 477437880 (477.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2397338  bytes 477437880 (477.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28967304  bytes 1971018586 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63573209  bytes 93444381661 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2397471  bytes 477456328 (477.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2397471  bytes 477456328 (477.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28967367  bytes 1971033104 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63573293  bytes 93444396586 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2397592  bytes 477475150 (477.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2397592  bytes 477475150 (477.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28967422  bytes 1971046545 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63573372  bytes 93444411078 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2397709  bytes 477492614 (477.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2397709  bytes 477492614 (477.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28967474  bytes 1971059692 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63573447  bytes 93444425256 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2397821  bytes 477509780 (477.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2397821  bytes 477509780 (477.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28967560  bytes 1971078604 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63573559  bytes 93444444903 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2397960  bytes 477529884 (477.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2397960  bytes 477529884 (477.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28967637  bytes 1971096253 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63573663  bytes 93444464105 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2398097  bytes 477548592 (477.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2398097  bytes 477548592 (477.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28967700  bytes 1971110794 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63573746  bytes 93444478992 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2398215  bytes 477567222 (477.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2398215  bytes 477567222 (477.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28967752  bytes 1971123945 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63573824  bytes 93444493377 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2398328  bytes 477584452 (477.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2398328  bytes 477584452 (477.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28967809  bytes 1971137312 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63573904  bytes 93444507946 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2398443  bytes 477601750 (477.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2398443  bytes 477601750 (477.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28967904  bytes 1971156764 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63574013  bytes 93444527551 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2398579  bytes 477621536 (477.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2398579  bytes 477621536 (477.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28967987  bytes 1971174762 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63574120  bytes 93444547016 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2398725  bytes 477640899 (477.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2398725  bytes 477640899 (477.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28968047  bytes 1971188872 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63574201  bytes 93444561628 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2398846  bytes 477659613 (477.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2398846  bytes 477659613 (477.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28968099  bytes 1971201959 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63574274  bytes 93444575643 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2398959  bytes 477676877 (477.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2398959  bytes 477676877 (477.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28968154  bytes 1971215325 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63574347  bytes 93444589733 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2399067  bytes 477693739 (477.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2399067  bytes 477693739 (477.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28968240  bytes 1971234259 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63574456  bytes 93444609156 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2399206  bytes 477713831 (477.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2399206  bytes 477713831 (477.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28968295  bytes 1971247666 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63574537  bytes 93444623959 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2399342  bytes 477732465 (477.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2399342  bytes 477732465 (477.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28968379  bytes 1971266406 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63574641  bytes 93444643018 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2399482  bytes 477752427 (477.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2399482  bytes 477752427 (477.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28968433  bytes 1971279733 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63574715  bytes 93444657083 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2399597  bytes 477769631 (477.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2399597  bytes 477769631 (477.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28968486  bytes 1971292951 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63574791  bytes 93444671355 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2399709  bytes 477786835 (477.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2399709  bytes 477786835 (477.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28968573  bytes 1971311912 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63574902  bytes 93444690989 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2399850  bytes 477807007 (477.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2399850  bytes 477807007 (477.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28968630  bytes 1971325407 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63574982  bytes 93444705486 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2399972  bytes 477824767 (477.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2399972  bytes 477824767 (477.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28968720  bytes 1971344477 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63575092  bytes 93444725231 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2400118  bytes 477845092 (477.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2400118  bytes 477845092 (477.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28968777  bytes 1971358031 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63575170  bytes 93444739655 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2400234  bytes 477862466 (477.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2400234  bytes 477862466 (477.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28968833  bytes 1971371354 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63575250  bytes 93444754220 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2400350  bytes 477879840 (477.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2400350  bytes 477879840 (477.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28968896  bytes 1971385957 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63575337  bytes 93444769357 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2400479  bytes 477899176 (477.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2400479  bytes 477899176 (477.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28968967  bytes 1971403240 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63575436  bytes 93444788059 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2400601  bytes 477917078 (477.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2400601  bytes 477917078 (477.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28969059  bytes 1971422496 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63575546  bytes 93444807766 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2400755  bytes 477937858 (477.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2400755  bytes 477937858 (477.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28969115  bytes 1971435926 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63575624  bytes 93444822102 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2400872  bytes 477955260 (477.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2400872  bytes 477955260 (477.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28969180  bytes 1971453352 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63575715  bytes 93444837944 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2401002  bytes 477973550 (477.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2401002  bytes 477973550 (477.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28969242  bytes 1971467939 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63575802  bytes 93444853084 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2401133  bytes 477992990 (477.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2401133  bytes 477992990 (477.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28969315  bytes 1971485295 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63575898  bytes 93444871484 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2401256  bytes 478010874 (478.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2401256  bytes 478010874 (478.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28969400  bytes 1971504163 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63576008  bytes 93444891250 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2401405  bytes 478031381 (478.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2401405  bytes 478031381 (478.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28969454  bytes 1971517482 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63576086  bytes 93444905566 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2401523  bytes 478048871 (478.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2401523  bytes 478048871 (478.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28969507  bytes 1971530800 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63576164  bytes 93444919965 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2401645  bytes 478066619 (478.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2401645  bytes 478066619 (478.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28969569  bytes 1971545326 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63576252  bytes 93444935107 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2401780  bytes 478086345 (478.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2401780  bytes 478086345 (478.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28969642  bytes 1971562841 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63576355  bytes 93444954029 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2401908  bytes 478104525 (478.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2401908  bytes 478104525 (478.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28969734  bytes 1971582095 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63576468  bytes 93444973936 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2402061  bytes 478125275 (478.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2402061  bytes 478125275 (478.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28969793  bytes 1971595677 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63576545  bytes 93444988246 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2402172  bytes 478142389 (478.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2402172  bytes 478142389 (478.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28969855  bytes 1971609518 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63576626  bytes 93445002835 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2402293  bytes 478160081 (478.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2402293  bytes 478160081 (478.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28969920  bytes 1971624369 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63576717  bytes 93445018208 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2402426  bytes 478179691 (478.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2402426  bytes 478179691 (478.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28970000  bytes 1971642177 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63576821  bytes 93445037253 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2402554  bytes 478197933 (478.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2402554  bytes 478197933 (478.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28970092  bytes 1971661365 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63576930  bytes 93445056954 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2402703  bytes 478218440 (478.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2402703  bytes 478218440 (478.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28970153  bytes 1971675060 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63577009  bytes 93445071381 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2402819  bytes 478235826 (478.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2402819  bytes 478235826 (478.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28970206  bytes 1971688223 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63577082  bytes 93445085392 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2402933  bytes 478253096 (478.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2402933  bytes 478253096 (478.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28970270  bytes 1971702817 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63577170  bytes 93445100610 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2403067  bytes 478272676 (478.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2403067  bytes 478272676 (478.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28970343  bytes 1971720197 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63577268  bytes 93445119087 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2403194  bytes 478290828 (478.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2403194  bytes 478290828 (478.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28970435  bytes 1971739434 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63577382  bytes 93445139083 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2403351  bytes 478311762 (478.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2403351  bytes 478311762 (478.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28970494  bytes 1971753076 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63577461  bytes 93445153593 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2403476  bytes 478329616 (478.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2403476  bytes 478329616 (478.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28970552  bytes 1971766598 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63577539  bytes 93445168025 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2403594  bytes 478347156 (478.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2403594  bytes 478347156 (478.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28970621  bytes 1971781891 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63577629  bytes 93445183668 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2403729  bytes 478366824 (478.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2403729  bytes 478366824 (478.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28970695  bytes 1971799268 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63577723  bytes 93445201878 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2403848  bytes 478384346 (478.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2403848  bytes 478384346 (478.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28970787  bytes 1971818552 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63577838  bytes 93445221955 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2404004  bytes 478405371 (478.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2404004  bytes 478405371 (478.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28970843  bytes 1971831963 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63577912  bytes 93445236052 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2404123  bytes 478422937 (478.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2404123  bytes 478422937 (478.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28970901  bytes 1971845509 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63577989  bytes 93445250422 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2404237  bytes 478440265 (478.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2404237  bytes 478440265 (478.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28970968  bytes 1971860443 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63578073  bytes 93445265320 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2404370  bytes 478459733 (478.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2404370  bytes 478459733 (478.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28971052  bytes 1971878533 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63578180  bytes 93445284553 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2404504  bytes 478478373 (478.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2404504  bytes 478478373 (478.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28971128  bytes 1971893942 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63578277  bytes 93445301948 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2404653  bytes 478498833 (478.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2404653  bytes 478498833 (478.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28971188  bytes 1971907221 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63578354  bytes 93445315886 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2404728  bytes 478508302 (478.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2404728  bytes 478508302 (478.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28971257  bytes 1971924553 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63578444  bytes 93445331719 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2404863  bytes 478526806 (478.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2404863  bytes 478526806 (478.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28971336  bytes 1971940770 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63578542  bytes 93445348680 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2405001  bytes 478546676 (478.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2405001  bytes 478546676 (478.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28971415  bytes 1971958698 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63578648  bytes 93445368256 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2405137  bytes 478565272 (478.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2405137  bytes 478565272 (478.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28971487  bytes 1971973624 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63578736  bytes 93445384704 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2405274  bytes 478584904 (478.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2405274  bytes 478584904 (478.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28971585  bytes 1971993716 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63578846  bytes 93445405396 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2405417  bytes 478603909 (478.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2405417  bytes 478603909 (478.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28971646  bytes 1972007371 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63578931  bytes 93445421797 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2405542  bytes 478621763 (478.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2405542  bytes 478621763 (478.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28971716  bytes 1972022714 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63579028  bytes 93445438598 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2405680  bytes 478641575 (478.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2405680  bytes 478641575 (478.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28971769  bytes 1972035869 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63579106  bytes 93445452955 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2405793  bytes 478658785 (478.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2405793  bytes 478658785 (478.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28971830  bytes 1972050276 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63579191  bytes 93445467499 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2405880  bytes 478670766 (478.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2405880  bytes 478670766 (478.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28971915  bytes 1972068359 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63579292  bytes 93445486489 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2406021  bytes 478689718 (478.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2406021  bytes 478689718 (478.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28971974  bytes 1972081953 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63579373  bytes 93445501047 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2406134  bytes 478706982 (478.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2406134  bytes 478706982 (478.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28972039  bytes 1972096659 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63579463  bytes 93445516345 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2406260  bytes 478726216 (478.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2406260  bytes 478726216 (478.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28972100  bytes 1972110376 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63579542  bytes 93445530846 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2406374  bytes 478743560 (478.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2406374  bytes 478743560 (478.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28972177  bytes 1972128623 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63579651  bytes 93445550302 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2406505  bytes 478763098 (478.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2406505  bytes 478763098 (478.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28972259  bytes 1972146660 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63579758  bytes 93445569670 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2406647  bytes 478782126 (478.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2406647  bytes 478782126 (478.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28972324  bytes 1972160527 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63579840  bytes 93445584299 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2406764  bytes 478799588 (478.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2406764  bytes 478799588 (478.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28972383  bytes 1972174878 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63579925  bytes 93445599284 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2406895  bytes 478819070 (478.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2406895  bytes 478819070 (478.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28972437  bytes 1972188197 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63580003  bytes 93445613601 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2407012  bytes 478836508 (478.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2407012  bytes 478836508 (478.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28972520  bytes 1972206883 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63580112  bytes 93445633036 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2407149  bytes 478856296 (478.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2407149  bytes 478856296 (478.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28972600  bytes 1972224832 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63580219  bytes 93445652516 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2407289  bytes 478875158 (478.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2407289  bytes 478875158 (478.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28972658  bytes 1972238390 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63580298  bytes 93445666950 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2407407  bytes 478892648 (478.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2407407  bytes 478892648 (478.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28972722  bytes 1972253085 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63580388  bytes 93445682289 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2407535  bytes 478911998 (478.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2407535  bytes 478911998 (478.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28972778  bytes 1972266500 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63580466  bytes 93445696674 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2407651  bytes 478929384 (478.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2407651  bytes 478929384 (478.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28972855  bytes 1972284748 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63580571  bytes 93445715815 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2407783  bytes 478948924 (478.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2407783  bytes 478948924 (478.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28972938  bytes 1972302847 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63580678  bytes 93445735213 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2407925  bytes 478967951 (478.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2407925  bytes 478967951 (478.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28972990  bytes 1972315950 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63580754  bytes 93445749438 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2408033  bytes 478984885 (478.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2408033  bytes 478984885 (478.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28973056  bytes 1972330876 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63580844  bytes 93445764840 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2408160  bytes 479004161 (479.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2408160  bytes 479004161 (479.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28973116  bytes 1972344648 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63580927  bytes 93445779636 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2408282  bytes 479021955 (479.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2408282  bytes 479021955 (479.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28973195  bytes 1972363217 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63581037  bytes 93445799140 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2408415  bytes 479041573 (479.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2408415  bytes 479041573 (479.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28973280  bytes 1972381378 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63581143  bytes 93445818498 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2408556  bytes 479060548 (479.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2408556  bytes 479060548 (479.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28973350  bytes 1972399025 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63581233  bytes 93445834263 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2408678  bytes 479078324 (479.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2408678  bytes 479078324 (479.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28973414  bytes 1972413744 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63581321  bytes 93445849505 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2408804  bytes 479097524 (479.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2408804  bytes 479097524 (479.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28973466  bytes 1972426907 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63581395  bytes 93445863569 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2408917  bytes 479114718 (479.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2408917  bytes 479114718 (479.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28973544  bytes 1972445319 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63581499  bytes 93445882619 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2409046  bytes 479133972 (479.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2409046  bytes 479133972 (479.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28973623  bytes 1972462994 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63581607  bytes 93445901982 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2409188  bytes 479153041 (479.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2409188  bytes 479153041 (479.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28973687  bytes 1972477140 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63581685  bytes 93445916513 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2409302  bytes 479170347 (479.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2409302  bytes 479170347 (479.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28973747  bytes 1972491617 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63581767  bytes 93445931322 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2409425  bytes 479189259 (479.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2409425  bytes 479189259 (479.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28973798  bytes 1972504775 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63581843  bytes 93445945594 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2409531  bytes 479206089 (479.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2409531  bytes 479206089 (479.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28973879  bytes 1972523410 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63581954  bytes 93445965166 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2409667  bytes 479225861 (479.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2409667  bytes 479225861 (479.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28973932  bytes 1972536677 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63582035  bytes 93445979937 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2409796  bytes 479244130 (479.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2409796  bytes 479244130 (479.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28974008  bytes 1972554306 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63582129  bytes 93445998351 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2409910  bytes 479261422 (479.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2409910  bytes 479261422 (479.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
b'Error on request'
Token e243aac39fb012c084cfefeb2a6a3641 is maybe invalid 
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28974079  bytes 1972569389 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63582221  bytes 93446013839 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2410043  bytes 479281068 (479.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2410043  bytes 479281068 (479.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28974141  bytes 1972583231 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63582308  bytes 93446029005 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2410161  bytes 479298592 (479.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2410161  bytes 479298592 (479.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28974221  bytes 1972601721 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63582416  bytes 93446048370 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2410292  bytes 479318168 (479.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2410292  bytes 479318168 (479.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28974274  bytes 1972615071 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63582494  bytes 93446062730 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2410413  bytes 479335876 (479.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2410413  bytes 479335876 (479.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28974352  bytes 1972632909 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63582599  bytes 93446082043 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2410553  bytes 479354761 (479.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2410553  bytes 479354761 (479.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28974417  bytes 1972647475 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63582687  bytes 93446097265 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2410678  bytes 479373897 (479.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2410678  bytes 479373897 (479.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28974468  bytes 1972660558 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63582764  bytes 93446111560 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2410791  bytes 479391127 (479.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2410791  bytes 479391127 (479.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28974528  bytes 1972674912 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63582851  bytes 93446126592 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2410918  bytes 479410277 (479.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2410918  bytes 479410277 (479.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28974599  bytes 1972692240 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63582952  bytes 93446145427 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2411039  bytes 479428065 (479.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2411039  bytes 479428065 (479.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28974678  bytes 1972709997 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63583055  bytes 93446164495 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2411173  bytes 479446615 (479.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2411173  bytes 479446615 (479.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28974746  bytes 1972724921 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63583143  bytes 93446179711 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2411296  bytes 479465741 (479.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2411296  bytes 479465741 (479.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28974802  bytes 1972738299 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63583221  bytes 93446194039 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2411407  bytes 479482831 (479.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2411407  bytes 479482831 (479.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28974864  bytes 1972752808 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63583306  bytes 93446209018 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2411531  bytes 479501785 (479.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2411531  bytes 479501785 (479.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28974939  bytes 1972770305 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63583409  bytes 93446227894 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2411660  bytes 479520005 (479.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2411660  bytes 479520005 (479.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28975017  bytes 1972787936 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63583510  bytes 93446246816 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2411799  bytes 479538840 (479.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2411799  bytes 479538840 (479.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28975087  bytes 1972803037 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63583599  bytes 93446262115 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2411926  bytes 479558092 (479.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2411926  bytes 479558092 (479.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28975142  bytes 1972816408 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63583677  bytes 93446276496 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2412041  bytes 479575450 (479.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2412041  bytes 479575450 (479.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28975207  bytes 1972831040 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63583764  bytes 93446291694 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2412169  bytes 479594684 (479.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2412169  bytes 479594684 (479.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28975279  bytes 1972848495 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63583868  bytes 93446310774 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2412298  bytes 479612966 (479.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2412298  bytes 479612966 (479.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28975368  bytes 1972870459 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63583982  bytes 93446331335 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2412441  bytes 479632128 (479.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2412441  bytes 479632128 (479.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28975439  bytes 1972885562 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63584072  bytes 93446346669 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2412571  bytes 479651560 (479.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2412571  bytes 479651560 (479.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28975498  bytes 1972899065 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63584147  bytes 93446360851 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2412683  bytes 479668702 (479.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2412683  bytes 479668702 (479.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28975557  bytes 1972913327 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63584229  bytes 93446375672 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2412798  bytes 479687152 (479.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2412798  bytes 479687152 (479.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28975634  bytes 1972931070 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63584335  bytes 93446394815 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2412927  bytes 479705408 (479.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2412927  bytes 479705408 (479.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28975717  bytes 1972949174 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63584440  bytes 93446414013 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2413068  bytes 479724347 (479.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2413068  bytes 479724347 (479.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28975778  bytes 1972963612 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63584527  bytes 93446429141 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2413194  bytes 479743605 (479.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2413194  bytes 479743605 (479.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28975831  bytes 1972976895 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63584604  bytes 93446443472 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2413305  bytes 479760695 (479.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2413305  bytes 479760695 (479.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28975889  bytes 1972991157 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63584688  bytes 93446458386 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2413426  bytes 479779481 (479.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2413426  bytes 479779481 (479.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28975961  bytes 1973008493 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63584790  bytes 93446477255 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2413552  bytes 479797557 (479.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2413552  bytes 479797557 (479.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28976045  bytes 1973026618 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63584897  bytes 93446496679 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2413688  bytes 479816213 (479.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2413688  bytes 479816213 (479.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28976114  bytes 1973041617 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63584986  bytes 93446512004 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2413816  bytes 479835625 (479.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2413816  bytes 479835625 (479.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28976166  bytes 1973054880 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63585062  bytes 93446526273 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2413926  bytes 479852699 (479.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2413926  bytes 479852699 (479.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28976228  bytes 1973069373 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63585145  bytes 93446541088 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2414044  bytes 479871187 (479.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2414044  bytes 479871187 (479.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28976306  bytes 1973087071 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63585245  bytes 93446559827 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2414169  bytes 479889307 (479.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2414169  bytes 479889307 (479.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28976386  bytes 1973104842 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63585348  bytes 93446578933 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2414312  bytes 479908517 (479.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2414312  bytes 479908517 (479.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28976454  bytes 1973119712 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63585436  bytes 93446594147 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2414440  bytes 479927809 (479.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2414440  bytes 479927809 (479.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28976506  bytes 1973132951 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63585511  bytes 93446608310 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2414549  bytes 479944677 (479.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2414549  bytes 479944677 (479.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28976567  bytes 1973147324 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63585597  bytes 93446623339 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2414666  bytes 479963255 (479.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2414666  bytes 479963255 (479.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28976645  bytes 1973164980 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63585699  bytes 93446642144 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2414791  bytes 479981243 (479.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2414791  bytes 479981243 (479.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28976707  bytes 1973178866 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63585785  bytes 93446657264 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2414925  bytes 479999809 (479.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2414925  bytes 479999809 (479.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28976801  bytes 1973198766 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63585896  bytes 93446677577 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2415057  bytes 480019331 (480.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2415057  bytes 480019331 (480.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28976857  bytes 1973212169 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63585974  bytes 93446691962 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2415172  bytes 480036665 (480.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2415172  bytes 480036665 (480.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28976918  bytes 1973226567 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63586058  bytes 93446706780 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2415295  bytes 480055555 (480.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2415295  bytes 480055555 (480.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28976990  bytes 1973243871 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63586158  bytes 93446725561 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2415412  bytes 480073189 (480.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2415412  bytes 480073189 (480.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28977044  bytes 1973257198 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63586235  bytes 93446739828 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2415537  bytes 480091054 (480.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2415537  bytes 480091054 (480.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28977136  bytes 1973276537 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63586351  bytes 93446760030 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2415687  bytes 480111774 (480.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2415687  bytes 480111774 (480.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28977194  bytes 1973290095 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63586432  bytes 93446774632 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2415800  bytes 480129030 (480.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2415800  bytes 480129030 (480.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28977256  bytes 1973304660 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63586522  bytes 93446789953 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2415928  bytes 480148216 (480.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2415928  bytes 480148216 (480.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28977313  bytes 1973318249 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63586602  bytes 93446804548 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2416048  bytes 480165896 (480.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2416048  bytes 480165896 (480.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28977405  bytes 1973343672 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63586722  bytes 93446825917 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2416179  bytes 480184392 (480.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2416179  bytes 480184392 (480.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28977959  bytes 1973403335 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63588282  bytes 93448982712 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2416351  bytes 480206624 (480.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2416351  bytes 480206624 (480.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28979526  bytes 1973522330 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63592383  bytes 93455014917 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2416485  bytes 480225358 (480.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2416485  bytes 480225358 (480.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28982235  bytes 1973705356 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63598549  bytes 93464159438 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2416627  bytes 480245660 (480.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2416627  bytes 480245660 (480.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28984472  bytes 1973855765 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63605000  bytes 93473768405 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2416753  bytes 480263884 (480.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2416753  bytes 480263884 (480.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28986038  bytes 1973973145 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63609227  bytes 93479981803 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2416892  bytes 480282968 (480.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2416892  bytes 480282968 (480.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28988003  bytes 1974111652 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63613797  bytes 93486693353 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2417064  bytes 480305132 (480.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2417064  bytes 480305132 (480.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28990173  bytes 1974258635 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63619997  bytes 93495910523 (93.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2417195  bytes 480323722 (480.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2417195  bytes 480323722 (480.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
b'Error on request'
Token e243aac39fb012c084cfefeb2a6a3641 is maybe invalid 
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28992346  bytes 1974418910 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63626130  bytes 93504991465 (93.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2417343  bytes 480344442 (480.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2417343  bytes 480344442 (480.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28993300  bytes 1974499563 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63629054  bytes 93509265358 (93.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2417463  bytes 480362248 (480.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2417463  bytes 480362248 (480.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28994953  bytes 1974624822 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63633439  bytes 93515711711 (93.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2417599  bytes 480381212 (480.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2417599  bytes 480381212 (480.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28996770  bytes 1974756759 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63638194  bytes 93522696457 (93.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2417766  bytes 480403092 (480.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2417766  bytes 480403092 (480.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28998255  bytes 1974869456 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63642354  bytes 93528832375 (93.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2417897  bytes 480421662 (480.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2417897  bytes 480421662 (480.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 28999958  bytes 1974990568 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63646923  bytes 93535580627 (93.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2418029  bytes 480441314 (480.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2418029  bytes 480441314 (480.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29002117  bytes 1975136252 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63652499  bytes 93543849862 (93.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2418169  bytes 480460370 (480.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2418169  bytes 480460370 (480.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29003813  bytes 1975264302 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63656917  bytes 93550340162 (93.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2418314  bytes 480479822 (480.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2418314  bytes 480479822 (480.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29005704  bytes 1975398361 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63661565  bytes 93557171135 (93.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2418483  bytes 480501886 (480.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2418483  bytes 480501886 (480.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29007525  bytes 1975524994 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63666108  bytes 93563892588 (93.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2418609  bytes 480520074 (480.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2418609  bytes 480520074 (480.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29009869  bytes 1975686285 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63672478  bytes 93573347533 (93.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2418751  bytes 480540376 (480.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2418751  bytes 480540376 (480.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29011750  bytes 1975818114 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63677043  bytes 93580099420 (93.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2418883  bytes 480558912 (480.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2418883  bytes 480558912 (480.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29013499  bytes 1975945576 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63681627  bytes 93586860011 (93.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2419019  bytes 480577906 (480.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2419019  bytes 480577906 (480.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29015387  bytes 1976081144 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63686177  bytes 93593533180 (93.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2419193  bytes 480600231 (480.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2419193  bytes 480600231 (480.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29017199  bytes 1976213082 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63690721  bytes 93600245990 (93.6 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2419328  bytes 480618923 (480.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2419328  bytes 480618923 (480.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29019744  bytes 1976391149 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63696703  bytes 93609105440 (93.6 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2419477  bytes 480639659 (480.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2419477  bytes 480639659 (480.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29021786  bytes 1976531352 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63701683  bytes 93616486875 (93.6 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2419608  bytes 480657953 (480.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2419608  bytes 480657953 (480.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29024551  bytes 1976714154 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63709006  bytes 93627377396 (93.6 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2419754  bytes 480677401 (480.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2419754  bytes 480677401 (480.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29027225  bytes 1976890693 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63716203  bytes 93638074506 (93.6 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2419925  bytes 480699632 (480.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2419925  bytes 480699632 (480.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29029394  bytes 1977042133 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63721070  bytes 93645254548 (93.6 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2420068  bytes 480718978 (480.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2420068  bytes 480718978 (480.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29032478  bytes 1977239670 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63728941  bytes 93656992048 (93.6 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2420213  bytes 480739282 (480.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2420213  bytes 480739282 (480.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29034282  bytes 1977367322 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63733583  bytes 93663862304 (93.6 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2420339  bytes 480757434 (480.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2420339  bytes 480757434 (480.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
b'Error on request'
Token e243aac39fb012c084cfefeb2a6a3641 is maybe invalid 
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29035099  bytes 1977438199 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63735094  bytes 93665970559 (93.6 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2420478  bytes 480776386 (480.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2420478  bytes 480776386 (480.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29038321  bytes 1977640856 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63742550  bytes 93677080311 (93.6 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2420640  bytes 480797884 (480.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2420640  bytes 480797884 (480.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29041053  bytes 1977818389 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63748986  bytes 93686646987 (93.6 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2420790  bytes 480817464 (480.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2420790  bytes 480817464 (480.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29043482  bytes 1977979450 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63755317  bytes 93696054134 (93.6 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2420932  bytes 480837672 (480.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2420932  bytes 480837672 (480.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29045354  bytes 1978111584 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63760289  bytes 93703423218 (93.7 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2421057  bytes 480855808 (480.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2421057  bytes 480855808 (480.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29047198  bytes 1978242986 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63765274  bytes 93710773670 (93.7 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2421205  bytes 480875334 (480.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2421205  bytes 480875334 (480.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29050035  bytes 1978425611 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63772953  bytes 93722206950 (93.7 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2421360  bytes 480896570 (480.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2421360  bytes 480896570 (480.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29051771  bytes 1978554416 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63777408  bytes 93728763639 (93.7 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2421516  bytes 480916583 (480.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2421516  bytes 480916583 (480.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29054928  bytes 1978753667 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63785255  bytes 93740470881 (93.7 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2421651  bytes 480936415 (480.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2421651  bytes 480936415 (480.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29059463  bytes 1979023468 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63796457  bytes 93757263921 (93.7 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2421788  bytes 480955235 (480.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2421788  bytes 480955235 (480.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29063661  bytes 1979270579 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63806014  bytes 93771581945 (93.7 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2421916  bytes 480973543 (480.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2421916  bytes 480973543 (480.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29068176  bytes 1979540452 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63816538  bytes 93787317006 (93.7 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2422070  bytes 480994781 (480.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2422070  bytes 480994781 (480.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29071647  bytes 1979755882 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63824350  bytes 93798958657 (93.7 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2422221  bytes 481014487 (481.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2422221  bytes 481014487 (481.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29076181  bytes 1980022055 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63834401  bytes 93814014500 (93.8 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2422356  bytes 481034295 (481.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2422356  bytes 481034295 (481.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29079524  bytes 1980220268 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63842237  bytes 93825739364 (93.8 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2422487  bytes 481052697 (481.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2422487  bytes 481052697 (481.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29083073  bytes 1980440587 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63850295  bytes 93837774603 (93.8 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2422622  bytes 481071389 (481.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2422622  bytes 481071389 (481.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29088179  bytes 1980746662 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63861613  bytes 93854691649 (93.8 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2422791  bytes 481093443 (481.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2422791  bytes 481093443 (481.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29091345  bytes 1980949961 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63868883  bytes 93865506500 (93.8 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2422943  bytes 481113285 (481.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2422943  bytes 481113285 (481.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29094948  bytes 1981168046 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63877026  bytes 93877684220 (93.8 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2423070  bytes 481132571 (481.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2423070  bytes 481132571 (481.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29098059  bytes 1981365340 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63884298  bytes 93888531881 (93.8 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2423203  bytes 481151147 (481.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2423203  bytes 481151147 (481.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29100661  bytes 1981528774 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63890505  bytes 93897777233 (93.8 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2423331  bytes 481169463 (481.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2423331  bytes 481169463 (481.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29102577  bytes 1981664339 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63895193  bytes 93904671991 (93.9 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2423490  bytes 481190913 (481.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2423490  bytes 481190913 (481.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29104322  bytes 1981796568 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63900026  bytes 93911795260 (93.9 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2423643  bytes 481210769 (481.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2423643  bytes 481210769 (481.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29106956  bytes 1981979954 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63906689  bytes 93921679655 (93.9 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2423803  bytes 481232041 (481.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2423803  bytes 481232041 (481.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29108959  bytes 1982118108 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63911946  bytes 93929475634 (93.9 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2423935  bytes 481250577 (481.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2423935  bytes 481250577 (481.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29110825  bytes 1982249887 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63916444  bytes 93936124067 (93.9 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2424063  bytes 481268869 (481.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2424063  bytes 481268869 (481.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29112808  bytes 1982390333 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63921063  bytes 93942912421 (93.9 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2424224  bytes 481290489 (481.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2424224  bytes 481290489 (481.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29114890  bytes 1982532973 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63925971  bytes 93950144705 (93.9 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2424381  bytes 481310577 (481.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2424381  bytes 481310577 (481.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29116507  bytes 1982657688 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63930419  bytes 93956699207 (93.9 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2424517  bytes 481330437 (481.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2424517  bytes 481330437 (481.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29118260  bytes 1982782186 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63935145  bytes 93963693536 (93.9 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2424649  bytes 481348997 (481.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2424649  bytes 481348997 (481.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29119550  bytes 1982880547 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63938300  bytes 93968306884 (93.9 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2424775  bytes 481367185 (481.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2424775  bytes 481367185 (481.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29122002  bytes 1983049234 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63944282  bytes 93977151138 (93.9 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2424930  bytes 481388379 (481.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2424930  bytes 481388379 (481.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29123686  bytes 1983175545 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63948740  bytes 93983700049 (93.9 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2425094  bytes 481409022 (481.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2425094  bytes 481409022 (481.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29125282  bytes 1983295857 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63952866  bytes 93989769919 (93.9 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2425233  bytes 481429098 (481.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2425233  bytes 481429098 (481.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29126471  bytes 1983391204 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63955951  bytes 93994276618 (93.9 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2425360  bytes 481447338 (481.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2425360  bytes 481447338 (481.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29128004  bytes 1983505060 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63959717  bytes 93999809775 (93.9 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2425488  bytes 481465606 (481.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2425488  bytes 481465606 (481.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29129368  bytes 1983608217 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63963198  bytes 94004869038 (94.0 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2425646  bytes 481487004 (481.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2425646  bytes 481487004 (481.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29129389  bytes 1983612994 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63963234  bytes 94004874064 (94.0 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2425686  bytes 481489671 (481.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2425686  bytes 481489671 (481.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29129443  bytes 1983626787 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63963295  bytes 94004884230 (94.0 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2425726  bytes 481493541 (481.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2425726  bytes 481493541 (481.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
b'Error on request'
Token e243aac39fb012c084cfefeb2a6a3641 is maybe invalid 
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29129460  bytes 1983631300 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63963323  bytes 94004888598 (94.0 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2425738  bytes 481494355 (481.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2425738  bytes 481494355 (481.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29129477  bytes 1983635834 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63963352  bytes 94004893040 (94.0 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2425756  bytes 481495647 (481.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2425756  bytes 481495647 (481.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29129523  bytes 1983645776 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63963418  bytes 94004903229 (94.0 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2425801  bytes 481499869 (481.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2425801  bytes 481499869 (481.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29129564  bytes 1983654933 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63963478  bytes 94004913260 (94.0 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2425876  bytes 481509477 (481.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2425876  bytes 481509477 (481.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29129630  bytes 1983669088 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63963562  bytes 94004927886 (94.0 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2425964  bytes 481520979 (481.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2425964  bytes 481520979 (481.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29129687  bytes 1983682573 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63963641  bytes 94004942359 (94.0 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2426080  bytes 481538411 (481.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2426080  bytes 481538411 (481.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29129755  bytes 1983700261 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63963733  bytes 94004958390 (94.0 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2426196  bytes 481555927 (481.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2426196  bytes 481555927 (481.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29129841  bytes 1983719207 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63963847  bytes 94004978208 (94.0 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2426333  bytes 481575883 (481.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2426333  bytes 481575883 (481.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29129895  bytes 1983732377 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63963922  bytes 94004992423 (94.0 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2426440  bytes 481592729 (481.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2426440  bytes 481592729 (481.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
b'Error on request'
Token e243aac39fb012c084cfefeb2a6a3641 is maybe invalid 
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29129983  bytes 1983751397 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63964032  bytes 94005012108 (94.0 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2426590  bytes 481613300 (481.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2426590  bytes 481613300 (481.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29130040  bytes 1983764783 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63964111  bytes 94005026543 (94.0 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2426707  bytes 481630726 (481.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2426707  bytes 481630726 (481.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29130100  bytes 1983778429 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63964190  bytes 94005040986 (94.0 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2426820  bytes 481647920 (481.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2426820  bytes 481647920 (481.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29130168  bytes 1983793207 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63964277  bytes 94005056143 (94.0 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2426953  bytes 481667558 (481.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2426953  bytes 481667558 (481.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29130240  bytes 1983810542 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63964378  bytes 94005074934 (94.0 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2427074  bytes 481685346 (481.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2427074  bytes 481685346 (481.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29130338  bytes 1983833747 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63964502  bytes 94005096279 (94.0 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2427225  bytes 481706064 (481.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2427225  bytes 481706064 (481.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29130396  bytes 1983847253 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63964583  bytes 94005110914 (94.0 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2427336  bytes 481723190 (481.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2427336  bytes 481723190 (481.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29130450  bytes 1983860455 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63964660  bytes 94005125305 (94.0 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2427447  bytes 481740244 (481.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2427447  bytes 481740244 (481.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29130516  bytes 1983875245 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63964749  bytes 94005140610 (94.0 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2427576  bytes 481759552 (481.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2427576  bytes 481759552 (481.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29130586  bytes 1983892452 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63964844  bytes 94005158977 (94.0 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2427700  bytes 481777586 (481.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2427700  bytes 481777586 (481.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29130673  bytes 1983911309 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63964951  bytes 94005178480 (94.0 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2427841  bytes 481797654 (481.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2427841  bytes 481797654 (481.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29130734  bytes 1983925235 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63965032  bytes 94005193099 (94.0 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2427965  bytes 481815490 (481.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2427965  bytes 481815490 (481.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29130804  bytes 1983942950 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63965133  bytes 94005209642 (94.0 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2428087  bytes 481833304 (481.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2428087  bytes 481833304 (481.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29134025  bytes 1984147040 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63972140  bytes 94015624721 (94.0 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2428243  bytes 481854510 (481.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2428243  bytes 481854510 (481.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29136214  bytes 1984298038 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63977035  bytes 94022847120 (94.0 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2428385  bytes 481873822 (481.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2428385  bytes 481873822 (481.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
b'Error on request'
Token e243aac39fb012c084cfefeb2a6a3641 is maybe invalid 
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29138118  bytes 1984436426 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63981860  bytes 94029943331 (94.0 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2428549  bytes 481895391 (481.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2428549  bytes 481895391 (481.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29140187  bytes 1984577193 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63986995  bytes 94037561888 (94.0 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2428678  bytes 481913759 (481.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2428678  bytes 481913759 (481.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29141987  bytes 1984703149 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63991606  bytes 94044384781 (94.0 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2428811  bytes 481932347 (481.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2428811  bytes 481932347 (481.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29143586  bytes 1984815156 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 63995524  bytes 94050163699 (94.0 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2428940  bytes 481951865 (481.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2428940  bytes 481951865 (481.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29146285  bytes 1984992619 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64002032  bytes 94059828157 (94.0 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2429076  bytes 481970731 (481.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2429076  bytes 481970731 (481.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29149655  bytes 1985205044 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64009702  bytes 94071222008 (94.0 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2429251  bytes 481993025 (481.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2429251  bytes 481993025 (481.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29152867  bytes 1985403969 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64017144  bytes 94082334707 (94.0 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2429380  bytes 482011393 (482.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2429380  bytes 482011393 (482.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29155296  bytes 1985563991 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64022964  bytes 94090989490 (94.0 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2429503  bytes 482029425 (482.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2429503  bytes 482029425 (482.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29158148  bytes 1985753959 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64029540  bytes 94100758200 (94.1 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2429654  bytes 482050313 (482.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2429654  bytes 482050313 (482.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29160266  bytes 1985897546 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64034470  bytes 94108046914 (94.1 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2429784  bytes 482068749 (482.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2429784  bytes 482068749 (482.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29163043  bytes 1986085915 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64040665  bytes 94117200863 (94.1 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2429962  bytes 482091386 (482.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2429962  bytes 482091386 (482.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29164766  bytes 1986210851 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64045056  bytes 94123690577 (94.1 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2430092  bytes 482109828 (482.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2430092  bytes 482109828 (482.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29166671  bytes 1986346355 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64049680  bytes 94130527168 (94.1 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2430236  bytes 482129082 (482.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2430236  bytes 482129082 (482.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29168470  bytes 1986476337 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64054192  bytes 94137185489 (94.1 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2430376  bytes 482149066 (482.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2430376  bytes 482149066 (482.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29170187  bytes 1986604142 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64058613  bytes 94143689723 (94.1 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2430528  bytes 482168874 (482.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2430528  bytes 482168874 (482.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29171670  bytes 1986712188 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64061715  bytes 94148221171 (94.1 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2430687  bytes 482190092 (482.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2430687  bytes 482190092 (482.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29173637  bytes 1986853606 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64066284  bytes 94154956740 (94.1 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2430825  bytes 482208890 (482.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2430825  bytes 482208890 (482.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29175491  bytes 1986985480 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64070930  bytes 94161830749 (94.1 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2430954  bytes 482227294 (482.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2430954  bytes 482227294 (482.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29177487  bytes 1987125610 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64075794  bytes 94169018798 (94.1 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2431104  bytes 482248082 (482.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2431104  bytes 482248082 (482.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29180239  bytes 1987301938 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64081837  bytes 94177994617 (94.1 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2431244  bytes 482267224 (482.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2431244  bytes 482267224 (482.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29183146  bytes 1987492145 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64088252  bytes 94187517676 (94.1 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2431404  bytes 482288563 (482.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2431404  bytes 482288563 (482.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29186630  bytes 1987711083 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64096152  bytes 94199280337 (94.1 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2431554  bytes 482308332 (482.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2431554  bytes 482308332 (482.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29188726  bytes 1987853995 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64101381  bytes 94207035882 (94.2 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2431693  bytes 482327196 (482.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2431693  bytes 482327196 (482.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29191031  bytes 1988005912 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64106959  bytes 94215307378 (94.2 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2431850  bytes 482348408 (482.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2431850  bytes 482348408 (482.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29193055  bytes 1988146970 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64111904  bytes 94222599397 (94.2 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2431996  bytes 482367796 (482.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2431996  bytes 482367796 (482.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29195326  bytes 1988301233 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64116854  bytes 94229919817 (94.2 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2432145  bytes 482388320 (482.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2432145  bytes 482388320 (482.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29197445  bytes 1988448486 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64121824  bytes 94237250446 (94.2 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2432311  bytes 482408876 (482.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2432311  bytes 482408876 (482.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29198930  bytes 1988553429 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64125110  bytes 94242064987 (94.2 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2432449  bytes 482427818 (482.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2432449  bytes 482427818 (482.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29202144  bytes 1988754346 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64132799  bytes 94253524969 (94.2 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2432595  bytes 482448292 (482.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2432595  bytes 482448292 (482.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29204420  bytes 1988900752 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64138319  bytes 94261732502 (94.2 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2432728  bytes 482466860 (482.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2432728  bytes 482466860 (482.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29205655  bytes 1988998098 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64141470  bytes 94266319110 (94.2 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2432873  bytes 482487224 (482.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2432873  bytes 482487224 (482.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29207504  bytes 1989131545 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64146032  bytes 94273032581 (94.2 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2433029  bytes 482507237 (482.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2433029  bytes 482507237 (482.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29209300  bytes 1989258865 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64150275  bytes 94279298155 (94.2 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2433160  bytes 482525721 (482.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2433160  bytes 482525721 (482.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29211896  bytes 1989429486 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64156390  bytes 94288379179 (94.2 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2433312  bytes 482546613 (482.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2433312  bytes 482546613 (482.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29213085  bytes 1989525794 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64159218  bytes 94292506302 (94.2 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2433445  bytes 482565095 (482.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2433445  bytes 482565095 (482.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29214803  bytes 1989654435 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64163638  bytes 94298987706 (94.2 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2433604  bytes 482586559 (482.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2433604  bytes 482586559 (482.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29216654  bytes 1989786830 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64167975  bytes 94305352217 (94.3 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2433766  bytes 482606908 (482.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2433766  bytes 482606908 (482.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29218451  bytes 1989915687 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64172250  bytes 94311667244 (94.3 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2433896  bytes 482625340 (482.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2433896  bytes 482625340 (482.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29220943  bytes 1990081051 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64178310  bytes 94320661158 (94.3 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2434041  bytes 482645880 (482.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2434041  bytes 482645880 (482.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29222723  bytes 1990209010 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64182649  bytes 94327066274 (94.3 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2434174  bytes 482664420 (482.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2434174  bytes 482664420 (482.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29224443  bytes 1990336935 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64187063  bytes 94333544447 (94.3 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2434329  bytes 482685536 (482.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2434329  bytes 482685536 (482.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29226378  bytes 1990476113 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64191334  bytes 94339817236 (94.3 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2434485  bytes 482705547 (482.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2434485  bytes 482705547 (482.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29228335  bytes 1990615470 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64196063  bytes 94346798971 (94.3 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2434635  bytes 482725255 (482.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2434635  bytes 482725255 (482.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29231792  bytes 1990835708 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64205331  bytes 94360637637 (94.3 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2434796  bytes 482746745 (482.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2434796  bytes 482746745 (482.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29233728  bytes 1990972489 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64210382  bytes 94368118564 (94.3 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2434935  bytes 482765633 (482.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2434935  bytes 482765633 (482.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29235766  bytes 1991115619 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64215391  bytes 94375503682 (94.3 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2435092  bytes 482786791 (482.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2435092  bytes 482786791 (482.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29237761  bytes 1991260273 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64219965  bytes 94382226783 (94.3 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2435255  bytes 482807168 (482.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2435255  bytes 482807168 (482.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29239808  bytes 1991403644 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64224575  bytes 94389046235 (94.3 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2435394  bytes 482826056 (482.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2435394  bytes 482826056 (482.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29241716  bytes 1991539144 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64229068  bytes 94395669424 (94.3 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2435542  bytes 482846740 (482.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2435542  bytes 482846740 (482.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29243918  bytes 1991691336 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64233595  bytes 94402365845 (94.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2435674  bytes 482865276 (482.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2435674  bytes 482865276 (482.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29245971  bytes 1991840226 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64238518  bytes 94409610073 (94.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2435832  bytes 482886482 (482.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2435832  bytes 482886482 (482.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29248376  bytes 1992003930 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64244426  bytes 94418351200 (94.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2436008  bytes 482907714 (482.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2436008  bytes 482907714 (482.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29250802  bytes 1992161953 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64250583  bytes 94427517568 (94.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2436151  bytes 482926822 (482.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2436151  bytes 482926822 (482.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29253895  bytes 1992355372 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64258051  bytes 94438661337 (94.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2436293  bytes 482947006 (482.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2436293  bytes 482947006 (482.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29257605  bytes 1992583502 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64266844  bytes 94451810242 (94.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2436432  bytes 482965976 (482.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2436432  bytes 482965976 (482.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29260930  bytes 1992793472 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64274793  bytes 94463655315 (94.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2436577  bytes 482986394 (482.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2436577  bytes 482986394 (482.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29263464  bytes 1992954936 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64280986  bytes 94472869478 (94.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2436738  bytes 483006706 (483.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2436738  bytes 483006706 (483.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29264752  bytes 1993053229 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64284043  bytes 94477318197 (94.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2436873  bytes 483025312 (483.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2436873  bytes 483025312 (483.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29267725  bytes 1993240502 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64290888  bytes 94487510674 (94.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2437021  bytes 483045998 (483.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2437021  bytes 483045998 (483.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29272241  bytes 1993507644 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64301150  bytes 94502890840 (94.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2437155  bytes 483064626 (483.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2437155  bytes 483064626 (483.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29276861  bytes 1993784203 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64311053  bytes 94517675415 (94.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2437307  bytes 483085550 (483.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2437307  bytes 483085550 (483.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29280867  bytes 1994021868 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64320922  bytes 94532455486 (94.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2437451  bytes 483104773 (483.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2437451  bytes 483104773 (483.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29282210  bytes 1994125720 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64324002  bytes 94536939911 (94.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2437595  bytes 483124041 (483.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2437595  bytes 483124041 (483.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29284255  bytes 1994268416 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64329017  bytes 94544351854 (94.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2437749  bytes 483145097 (483.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2437749  bytes 483145097 (483.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29286343  bytes 1994412256 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64333985  bytes 94551708371 (94.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2437888  bytes 483163889 (483.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2437888  bytes 483163889 (483.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29288486  bytes 1994564719 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64338607  bytes 94558490616 (94.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2438042  bytes 483185069 (483.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2438042  bytes 483185069 (483.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29290806  bytes 1994717257 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64343768  bytes 94566146919 (94.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2438177  bytes 483203785 (483.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2438177  bytes 483203785 (483.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29292486  bytes 1994833108 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64347520  bytes 94571633233 (94.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2438336  bytes 483223984 (483.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2438336  bytes 483223984 (483.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29294507  bytes 1994969368 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64352075  bytes 94578343041 (94.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2438491  bytes 483245056 (483.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2438491  bytes 483245056 (483.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29296568  bytes 1995108932 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64356816  bytes 94585363152 (94.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2438628  bytes 483263816 (483.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2438628  bytes 483263816 (483.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29299273  bytes 1995281111 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64362646  bytes 94594022700 (94.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2438771  bytes 483284056 (483.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2438771  bytes 483284056 (483.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29301939  bytes 1995456925 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64369197  bytes 94603747333 (94.6 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2438920  bytes 483303654 (483.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2438920  bytes 483303654 (483.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29304421  bytes 1995622460 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64374764  bytes 94611976533 (94.6 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2439086  bytes 483324257 (483.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2439086  bytes 483324257 (483.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29305883  bytes 1995730292 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64377747  bytes 94616326213 (94.6 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2439238  bytes 483345009 (483.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2439238  bytes 483345009 (483.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29308289  bytes 1995887170 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64383328  bytes 94624617211 (94.6 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2439378  bytes 483363925 (483.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2439378  bytes 483363925 (483.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29310200  bytes 1996020137 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64387741  bytes 94631139189 (94.6 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2439520  bytes 483383919 (483.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2439520  bytes 483383919 (483.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29312392  bytes 1996173464 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64393516  bytes 94639693673 (94.6 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2439671  bytes 483403601 (483.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2439671  bytes 483403601 (483.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29318830  bytes 1996553332 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64407586  bytes 94660775684 (94.6 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2439842  bytes 483424647 (483.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2439842  bytes 483424647 (483.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29321296  bytes 1996712115 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64413453  bytes 94669520985 (94.6 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2439933  bytes 483436538 (483.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2439933  bytes 483436538 (483.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29323180  bytes 1996831241 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64417645  bytes 94675759841 (94.6 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2440015  bytes 483446549 (483.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2440015  bytes 483446549 (483.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29326274  bytes 1997031099 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64425647  bytes 94687712186 (94.6 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2440115  bytes 483459000 (483.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2440115  bytes 483459000 (483.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29328394  bytes 1997172807 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64430468  bytes 94694864234 (94.6 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2440206  bytes 483469723 (483.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2440206  bytes 483469723 (483.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29331641  bytes 1997374525 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64438290  bytes 94706534109 (94.7 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2440326  bytes 483482321 (483.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2440326  bytes 483482321 (483.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29333871  bytes 1997525272 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64443864  bytes 94714798764 (94.7 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2440478  bytes 483503249 (483.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2440478  bytes 483503249 (483.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29336648  bytes 1997700010 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64450444  bytes 94724610368 (94.7 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2440610  bytes 483521749 (483.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2440610  bytes 483521749 (483.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29338418  bytes 1997822896 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64454878  bytes 94731164158 (94.7 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2440756  bytes 483542011 (483.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2440756  bytes 483542011 (483.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29340572  bytes 1997974210 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64460321  bytes 94739221034 (94.7 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2440905  bytes 483561601 (483.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2440905  bytes 483561601 (483.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29341944  bytes 1998077467 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64463657  bytes 94744074895 (94.7 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2441057  bytes 483581406 (483.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2441057  bytes 483581406 (483.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29344161  bytes 1998226887 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64468953  bytes 94751920014 (94.7 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2441205  bytes 483602078 (483.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2441205  bytes 483602078 (483.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29346822  bytes 1998395639 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64475896  bytes 94762275940 (94.7 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2441345  bytes 483621054 (483.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2441345  bytes 483621054 (483.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29349563  bytes 1998580923 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64482076  bytes 94771460583 (94.7 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2441486  bytes 483641020 (483.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2441486  bytes 483641020 (483.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29352356  bytes 1998760574 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64488649  bytes 94781226453 (94.7 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2441631  bytes 483660402 (483.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2441631  bytes 483660402 (483.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29355264  bytes 1998948321 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64495267  bytes 94791047524 (94.7 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2441801  bytes 483681321 (483.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2441801  bytes 483681321 (483.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29357764  bytes 1999113525 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64501233  bytes 94799902667 (94.7 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2441955  bytes 483702259 (483.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2441955  bytes 483702259 (483.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29359679  bytes 1999246449 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64505349  bytes 94805979034 (94.8 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2442090  bytes 483720715 (483.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2442090  bytes 483720715 (483.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29362127  bytes 1999416330 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64511252  bytes 94814730054 (94.8 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2442246  bytes 483741721 (483.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2442246  bytes 483741721 (483.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29364840  bytes 1999596249 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64517661  bytes 94824238865 (94.8 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2442390  bytes 483761087 (483.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2442390  bytes 483761087 (483.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29367860  bytes 1999781339 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64524435  bytes 94834327545 (94.8 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2442548  bytes 483781233 (483.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2442548  bytes 483781233 (483.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29370641  bytes 1999963200 (1.9 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64531230  bytes 94844419264 (94.8 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2442695  bytes 483801829 (483.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2442695  bytes 483801829 (483.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29374417  bytes 2000193357 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64539985  bytes 94857512395 (94.8 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2442822  bytes 483819997 (483.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2442822  bytes 483819997 (483.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29376488  bytes 2000335672 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64545124  bytes 94865123007 (94.8 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2442973  bytes 483840661 (483.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2442973  bytes 483840661 (483.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29378579  bytes 2000479367 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64549524  bytes 94871598669 (94.8 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2443124  bytes 483860405 (483.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2443124  bytes 483860405 (483.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29381075  bytes 2000645866 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64555252  bytes 94880100677 (94.8 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2443268  bytes 483879626 (483.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2443268  bytes 483879626 (483.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29384805  bytes 2000878816 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64563561  bytes 94892464373 (94.8 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2443448  bytes 483902307 (483.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2443448  bytes 483902307 (483.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29386916  bytes 2001024115 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64568740  bytes 94900137102 (94.9 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2443595  bytes 483921647 (483.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2443595  bytes 483921647 (483.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29389107  bytes 2001170517 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64573595  bytes 94907322218 (94.9 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2443739  bytes 483941947 (483.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2443739  bytes 483941947 (483.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29391261  bytes 2001320517 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64578499  bytes 94914550860 (94.9 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2443889  bytes 483961553 (483.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2443889  bytes 483961553 (483.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29393327  bytes 2001460513 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64583287  bytes 94921645292 (94.9 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2444020  bytes 483980001 (483.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2444020  bytes 483980001 (483.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29395961  bytes 2001628744 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64589229  bytes 94930449015 (94.9 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2444194  bytes 484002290 (484.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2444194  bytes 484002290 (484.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29398225  bytes 2001778586 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64594381  bytes 94938091600 (94.9 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2444328  bytes 484020894 (484.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2444328  bytes 484020894 (484.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29400205  bytes 2001921470 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64598951  bytes 94944818512 (94.9 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2444483  bytes 484041872 (484.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2444483  bytes 484041872 (484.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29402353  bytes 2002063113 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64603760  bytes 94951934632 (94.9 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2444633  bytes 484061476 (484.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2444633  bytes 484061476 (484.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29404434  bytes 2002212921 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64608585  bytes 94959040558 (94.9 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2444774  bytes 484080684 (484.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2444774  bytes 484080684 (484.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29406879  bytes 2002373897 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64613345  bytes 94966030141 (94.9 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2444952  bytes 484103159 (484.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2444952  bytes 484103159 (484.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29409012  bytes 2002514357 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64618025  bytes 94972965051 (94.9 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2445087  bytes 484121851 (484.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2445087  bytes 484121851 (484.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29411047  bytes 2002656672 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64622419  bytes 94979444949 (94.9 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2445228  bytes 484141899 (484.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2445228  bytes 484141899 (484.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29412854  bytes 2002786219 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64626714  bytes 94985785307 (94.9 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2445368  bytes 484160937 (484.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2445368  bytes 484160937 (484.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29414720  bytes 2002924708 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64630080  bytes 94990677817 (94.9 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2445515  bytes 484180449 (484.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2445515  bytes 484180449 (484.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29418103  bytes 2003138919 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64638064  bytes 95002547871 (95.0 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2445690  bytes 484202813 (484.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2445690  bytes 484202813 (484.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29419966  bytes 2003266108 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64642629  bytes 95009297398 (95.0 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2445824  bytes 484221477 (484.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2445824  bytes 484221477 (484.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29422264  bytes 2003423301 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64647915  bytes 95017119942 (95.0 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2445969  bytes 484241829 (484.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2445969  bytes 484241829 (484.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29425687  bytes 2003638054 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64655006  bytes 95027692058 (95.0 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2446104  bytes 484260521 (484.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2446104  bytes 484260521 (484.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29429584  bytes 2003899478 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64661611  bytes 95037500664 (95.0 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2446244  bytes 484279489 (484.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2446244  bytes 484279489 (484.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29434842  bytes 2004227638 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64670723  bytes 95051062938 (95.0 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2446428  bytes 484302357 (484.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2446428  bytes 484302357 (484.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29436708  bytes 2004360118 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64674987  bytes 95057358476 (95.0 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2446567  bytes 484321221 (484.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2446567  bytes 484321221 (484.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29439493  bytes 2004546025 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64681632  bytes 95067230586 (95.0 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2446717  bytes 484341867 (484.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2446717  bytes 484341867 (484.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29441520  bytes 2004687116 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64686635  bytes 95074641833 (95.0 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2446857  bytes 484360865 (484.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2446857  bytes 484360865 (484.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29443729  bytes 2004839924 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64691457  bytes 95081762314 (95.0 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2447001  bytes 484380029 (484.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2447001  bytes 484380029 (484.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29446713  bytes 2005034233 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64698149  bytes 95091665931 (95.0 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2447194  bytes 484403578 (484.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2447194  bytes 484403578 (484.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29449072  bytes 2005192267 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64703637  bytes 95099802908 (95.0 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2447336  bytes 484422658 (484.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2447336  bytes 484422658 (484.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29451311  bytes 2005342688 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64708661  bytes 95107246435 (95.1 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2447484  bytes 484443142 (484.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2447484  bytes 484443142 (484.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29453332  bytes 2005478156 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64713521  bytes 95114450653 (95.1 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2447613  bytes 484461356 (484.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2447613  bytes 484461356 (484.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29455585  bytes 2005637530 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64718783  bytes 95122202123 (95.1 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2447773  bytes 484481736 (484.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2447773  bytes 484481736 (484.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29457602  bytes 2005777411 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64723855  bytes 95129692014 (95.1 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2447948  bytes 484504045 (484.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2447948  bytes 484504045 (484.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29459128  bytes 2005894667 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64727181  bytes 95134551135 (95.1 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2448076  bytes 484522431 (484.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2448076  bytes 484522431 (484.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29461455  bytes 2006049582 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64732343  bytes 95142200294 (95.1 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2448208  bytes 484541893 (484.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2448208  bytes 484541893 (484.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29463994  bytes 2006216974 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64738582  bytes 95151485633 (95.1 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2448339  bytes 484560341 (484.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2448339  bytes 484560341 (484.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29466004  bytes 2006356418 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64743094  bytes 95158124313 (95.1 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2448483  bytes 484579623 (484.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2448483  bytes 484579623 (484.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29467587  bytes 2006462011 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64746635  bytes 95163327535 (95.1 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2448635  bytes 484600390 (484.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2448635  bytes 484600390 (484.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29469764  bytes 2006606061 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64751850  bytes 95171045226 (95.1 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2448784  bytes 484619918 (484.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2448784  bytes 484619918 (484.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29472662  bytes 2006790261 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64759275  bytes 95182107450 (95.1 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2448936  bytes 484640716 (484.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2448936  bytes 484640716 (484.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29475005  bytes 2006943607 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64764883  bytes 95190445216 (95.1 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2449069  bytes 484659268 (484.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2449069  bytes 484659268 (484.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29477401  bytes 2007101218 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64770894  bytes 95199352821 (95.1 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2449216  bytes 484678728 (484.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2449216  bytes 484678728 (484.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29480170  bytes 2007278045 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64777745  bytes 95209553319 (95.2 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2449372  bytes 484699864 (484.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2449372  bytes 484699864 (484.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29483754  bytes 2007501594 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64786620  bytes 95222797867 (95.2 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2449543  bytes 484720718 (484.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2449543  bytes 484720718 (484.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29486486  bytes 2007681297 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64792917  bytes 95232154952 (95.2 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2449687  bytes 484741018 (484.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2449687  bytes 484741018 (484.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29488968  bytes 2007842933 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64798992  bytes 95241189356 (95.2 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2449824  bytes 484759900 (484.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2449824  bytes 484759900 (484.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29490719  bytes 2007957736 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64803057  bytes 95247166986 (95.2 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2449969  bytes 484779260 (484.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2449969  bytes 484779260 (484.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29493957  bytes 2008162025 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64810491  bytes 95258238430 (95.2 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2450126  bytes 484800412 (484.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2450126  bytes 484800412 (484.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29496435  bytes 2008330800 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64816089  bytes 95266513878 (95.2 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2450289  bytes 484820826 (484.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2450289  bytes 484820826 (484.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29499250  bytes 2008512795 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64822791  bytes 95276489641 (95.2 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2450435  bytes 484841158 (484.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2450435  bytes 484841158 (484.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29501745  bytes 2008678796 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64828874  bytes 95285533663 (95.2 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2450578  bytes 484860230 (484.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2450578  bytes 484860230 (484.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29505430  bytes 2008915672 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64835896  bytes 95295995394 (95.2 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2450710  bytes 484878806 (484.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2450710  bytes 484878806 (484.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29509062  bytes 2009153852 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64842100  bytes 95305212968 (95.3 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2450818  bytes 484892303 (484.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2450818  bytes 484892303 (484.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29510428  bytes 2009262632 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64845522  bytes 95310199964 (95.3 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2450969  bytes 484911973 (484.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2450969  bytes 484911973 (484.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29512534  bytes 2009411902 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64850752  bytes 95317933164 (95.3 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2451124  bytes 484932963 (484.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2451124  bytes 484932963 (484.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29514457  bytes 2009545826 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64855602  bytes 95325117491 (95.3 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2451253  bytes 484951331 (484.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2451253  bytes 484951331 (484.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29516354  bytes 2009677677 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64860551  bytes 95332447615 (95.3 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2451392  bytes 484970251 (484.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2451392  bytes 484970251 (484.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29517444  bytes 2009764636 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64863492  bytes 95336712322 (95.3 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2451544  bytes 484991173 (484.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2451544  bytes 484991173 (484.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29519527  bytes 2009912170 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64868047  bytes 95343416776 (95.3 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2451703  bytes 485011307 (485.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2451703  bytes 485011307 (485.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29521437  bytes 2010045703 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64872293  bytes 95349670717 (95.3 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2451851  bytes 485031791 (485.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2451851  bytes 485031791 (485.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29523295  bytes 2010175637 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64876870  bytes 95356435299 (95.3 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2451999  bytes 485051173 (485.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2451999  bytes 485051173 (485.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29525246  bytes 2010315457 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64881285  bytes 95362947562 (95.3 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2452146  bytes 485070523 (485.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2452146  bytes 485070523 (485.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29528141  bytes 2010511493 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64887679  bytes 95372399702 (95.3 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2452318  bytes 485092787 (485.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2452318  bytes 485092787 (485.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29531043  bytes 2010693694 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64894927  bytes 95383195727 (95.3 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2452474  bytes 485112718 (485.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2452474  bytes 485112718 (485.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29533025  bytes 2010822420 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64899446  bytes 95389886477 (95.3 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2452616  bytes 485132784 (485.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2452616  bytes 485132784 (485.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29535118  bytes 2010962190 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64903766  bytes 95396279714 (95.3 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2452744  bytes 485150994 (485.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2452744  bytes 485150994 (485.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29537152  bytes 2011096476 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64908288  bytes 95402985395 (95.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2452871  bytes 485169164 (485.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2452871  bytes 485169164 (485.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29539786  bytes 2011276063 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64914605  bytes 95412336342 (95.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2453035  bytes 485190802 (485.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2453035  bytes 485190802 (485.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29541692  bytes 2011411587 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64919040  bytes 95418854367 (95.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2453205  bytes 485211685 (485.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2453205  bytes 485211685 (485.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29543316  bytes 2011533946 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64922925  bytes 95424557828 (95.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2453360  bytes 485232663 (485.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2453360  bytes 485232663 (485.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
b'Error on request'
Token e243aac39fb012c084cfefeb2a6a3641 is maybe invalid 
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29545809  bytes 2011698363 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64928742  bytes 95433203550 (95.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2453501  bytes 485251585 (485.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2453501  bytes 485251585 (485.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29548436  bytes 2011871227 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64935124  bytes 95442703672 (95.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2453636  bytes 485270143 (485.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2453636  bytes 485270143 (485.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29551898  bytes 2012092468 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64942935  bytes 95454306458 (95.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2453807  bytes 485292229 (485.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2453807  bytes 485292229 (485.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29553657  bytes 2012220300 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64947340  bytes 95460797951 (95.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2453968  bytes 485312479 (485.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2453968  bytes 485312479 (485.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29555626  bytes 2012362123 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64952159  bytes 95467904764 (95.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2454122  bytes 485333333 (485.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2454122  bytes 485333333 (485.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29557568  bytes 2012498604 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64956770  bytes 95474721134 (95.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2454264  bytes 485352377 (485.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2454264  bytes 485352377 (485.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29558238  bytes 2012558374 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64958386  bytes 95477018803 (95.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2454397  bytes 485370885 (485.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2454397  bytes 485370885 (485.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29560232  bytes 2012701585 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64963057  bytes 95483878603 (95.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2454561  bytes 485392635 (485.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2454561  bytes 485392635 (485.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29561971  bytes 2012825367 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64967272  bytes 95490089819 (95.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2454704  bytes 485411734 (485.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2454704  bytes 485411734 (485.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29564017  bytes 2012972536 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64971516  bytes 95496303246 (95.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2454869  bytes 485433915 (485.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2454869  bytes 485433915 (485.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29565984  bytes 2013105236 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64976135  bytes 95503133750 (95.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2455007  bytes 485452787 (485.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2455007  bytes 485452787 (485.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29568019  bytes 2013250642 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64980651  bytes 95509807617 (95.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2455146  bytes 485471615 (485.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2455146  bytes 485471615 (485.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29570591  bytes 2013426606 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64986670  bytes 95518700252 (95.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2455315  bytes 485493691 (485.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2455315  bytes 485493691 (485.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29572917  bytes 2013580939 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64991469  bytes 95525803046 (95.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2455449  bytes 485512295 (485.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2455449  bytes 485512295 (485.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29575140  bytes 2013739564 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 64996268  bytes 95532840258 (95.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2455631  bytes 485534919 (485.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2455631  bytes 485534919 (485.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29577055  bytes 2013874478 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65000665  bytes 95539321392 (95.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2455767  bytes 485553677 (485.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2455767  bytes 485553677 (485.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29579019  bytes 2014014145 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65005388  bytes 95546300728 (95.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2455904  bytes 485572483 (485.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2455904  bytes 485572483 (485.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29581807  bytes 2014199003 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65011499  bytes 95555336028 (95.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2456062  bytes 485593951 (485.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2456062  bytes 485593951 (485.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29583843  bytes 2014339217 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65015773  bytes 95561642260 (95.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2456205  bytes 485613059 (485.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2456205  bytes 485613059 (485.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29585109  bytes 2014439138 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65018963  bytes 95566282143 (95.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2456371  bytes 485634638 (485.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2456371  bytes 485634638 (485.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29587237  bytes 2014583807 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65023511  bytes 95573007631 (95.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2456511  bytes 485653578 (485.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2456511  bytes 485653578 (485.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29589401  bytes 2014733122 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65028264  bytes 95580039447 (95.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2456648  bytes 485672432 (485.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2456648  bytes 485672432 (485.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29590961  bytes 2014844045 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65031313  bytes 95584477939 (95.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2456798  bytes 485693096 (485.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2456798  bytes 485693096 (485.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29592908  bytes 2014978856 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65035891  bytes 95591227888 (95.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2456943  bytes 485712524 (485.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2456943  bytes 485712524 (485.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29594898  bytes 2015117969 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65040437  bytes 95597915197 (95.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2457106  bytes 485734053 (485.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2457106  bytes 485734053 (485.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29597047  bytes 2015263193 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65044987  bytes 95604639380 (95.6 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2457249  bytes 485753149 (485.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2457249  bytes 485753149 (485.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29598476  bytes 2015370459 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65048022  bytes 95609087515 (95.6 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2457371  bytes 485771059 (485.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2457371  bytes 485771059 (485.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29600462  bytes 2015501986 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65052525  bytes 95615734424 (95.6 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2457529  bytes 485792287 (485.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2457529  bytes 485792287 (485.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29603554  bytes 2015699305 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65058688  bytes 95624871898 (95.6 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2457685  bytes 485812265 (485.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2457685  bytes 485812265 (485.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29605217  bytes 2015824058 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65062052  bytes 95629760305 (95.6 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2457853  bytes 485834090 (485.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2457853  bytes 485834090 (485.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29608184  bytes 2016003681 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65068245  bytes 95638975413 (95.6 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2457995  bytes 485853196 (485.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2457995  bytes 485853196 (485.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29610652  bytes 2016169033 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65073364  bytes 95646558570 (95.6 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2458134  bytes 485872106 (485.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2458134  bytes 485872106 (485.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29612219  bytes 2016277851 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65076577  bytes 95651268018 (95.6 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2458281  bytes 485892620 (485.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2458281  bytes 485892620 (485.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29613777  bytes 2016392399 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65079730  bytes 95655855397 (95.6 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2458432  bytes 485912294 (485.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2458432  bytes 485912294 (485.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29616096  bytes 2016550097 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65084349  bytes 95662645979 (95.6 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2458610  bytes 485934592 (485.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2458610  bytes 485934592 (485.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29618246  bytes 2016697308 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65088827  bytes 95669267509 (95.6 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2458748  bytes 485953510 (485.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2458748  bytes 485953510 (485.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29619661  bytes 2016797256 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65091953  bytes 95673852219 (95.6 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2458882  bytes 485972138 (485.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2458882  bytes 485972138 (485.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29621985  bytes 2016958937 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65096959  bytes 95681241777 (95.6 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2459023  bytes 485992330 (485.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2459023  bytes 485992330 (485.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29624281  bytes 2017116025 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65101526  bytes 95687975853 (95.6 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2459161  bytes 486011110 (486.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2459161  bytes 486011110 (486.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29626505  bytes 2017268408 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65106028  bytes 95694584253 (95.6 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2459336  bytes 486033368 (486.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2459336  bytes 486033368 (486.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29628184  bytes 2017389805 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65110083  bytes 95700567074 (95.7 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2459475  bytes 486052360 (486.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2459475  bytes 486052360 (486.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29629994  bytes 2017517207 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65114420  bytes 95706979320 (95.7 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2459610  bytes 486070886 (486.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2459610  bytes 486070886 (486.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29632175  bytes 2017664685 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65119596  bytes 95714637589 (95.7 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2459762  bytes 486091720 (486.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2459762  bytes 486091720 (486.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29633743  bytes 2017780074 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65123325  bytes 95720108661 (95.7 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2459902  bytes 486110664 (486.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2459902  bytes 486110664 (486.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29636015  bytes 2017936517 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65128845  bytes 95728273294 (95.7 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2460077  bytes 486133032 (486.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2460077  bytes 486133032 (486.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29638252  bytes 2018090743 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65133905  bytes 95735753257 (95.7 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2460203  bytes 486151136 (486.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2460203  bytes 486151136 (486.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29640753  bytes 2018252602 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65140068  bytes 95744926497 (95.7 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2460335  bytes 486169698 (486.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2460335  bytes 486169698 (486.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29642638  bytes 2018381665 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65144641  bytes 95751683058 (95.7 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2460488  bytes 486190596 (486.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2460488  bytes 486190596 (486.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29644584  bytes 2018520001 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65149974  bytes 95759568106 (95.7 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2460637  bytes 486210212 (486.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2460637  bytes 486210212 (486.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29646718  bytes 2018659816 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65154924  bytes 95766899445 (95.7 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2460795  bytes 486231315 (486.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2460795  bytes 486231315 (486.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29651864  bytes 2018977782 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65165401  bytes 95782559393 (95.7 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2460951  bytes 486251323 (486.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2460951  bytes 486251323 (486.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29653803  bytes 2019110484 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65169805  bytes 95789038609 (95.7 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2461083  bytes 486269823 (486.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2461083  bytes 486269823 (486.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29655055  bytes 2019206581 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65173050  bytes 95793788438 (95.7 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2461223  bytes 486289951 (486.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2461223  bytes 486289951 (486.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29657158  bytes 2019349378 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65177740  bytes 95800703858 (95.8 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2461369  bytes 486309373 (486.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2461369  bytes 486309373 (486.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29659889  bytes 2019531542 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65183707  bytes 95809558553 (95.8 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2461510  bytes 486329493 (486.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2461510  bytes 486329493 (486.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29661826  bytes 2019661996 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65188006  bytes 95815884797 (95.8 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2461669  bytes 486349601 (486.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2461669  bytes 486349601 (486.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29663788  bytes 2019792257 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65192855  bytes 95823071215 (95.8 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2461812  bytes 486368707 (486.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2461812  bytes 486368707 (486.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29665458  bytes 2019908617 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65196863  bytes 95828981494 (95.8 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2461964  bytes 486389471 (486.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2461964  bytes 486389471 (486.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29668008  bytes 2020076138 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65202798  bytes 95837785517 (95.8 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2462107  bytes 486408739 (486.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2462107  bytes 486408739 (486.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29670946  bytes 2020270273 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65209280  bytes 95847397727 (95.8 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2462259  bytes 486429631 (486.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2462259  bytes 486429631 (486.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29672815  bytes 2020409847 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65213857  bytes 95854114903 (95.8 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2462415  bytes 486449705 (486.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2462415  bytes 486449705 (486.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29674549  bytes 2020533778 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65218300  bytes 95860680333 (95.8 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2462545  bytes 486468163 (486.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2462545  bytes 486468163 (486.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29677240  bytes 2020711045 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65224282  bytes 95869545315 (95.8 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2462709  bytes 486489787 (486.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2462709  bytes 486489787 (486.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29679068  bytes 2020840949 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65228758  bytes 95876158109 (95.8 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2462848  bytes 486508655 (486.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2462848  bytes 486508655 (486.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29680994  bytes 2020980249 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65233356  bytes 95882925194 (95.8 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2462996  bytes 486529319 (486.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2462996  bytes 486529319 (486.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29682810  bytes 2021113338 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65237809  bytes 95889472851 (95.8 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2463155  bytes 486549488 (486.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2463155  bytes 486549488 (486.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29684213  bytes 2021214591 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65241050  bytes 95894214533 (95.8 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2463293  bytes 486568430 (486.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2463293  bytes 486568430 (486.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29686330  bytes 2021358863 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65245692  bytes 95901062580 (95.9 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2463443  bytes 486589136 (486.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2463443  bytes 486589136 (486.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29688483  bytes 2021505991 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65250468  bytes 95908130131 (95.9 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2463575  bytes 486607636 (486.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2463575  bytes 486607636 (486.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29690502  bytes 2021645860 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65254971  bytes 95914751852 (95.9 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2463734  bytes 486628850 (486.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2463734  bytes 486628850 (486.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29692624  bytes 2021789650 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65259725  bytes 95921761094 (95.9 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2463898  bytes 486649279 (486.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2463898  bytes 486649279 (486.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29693951  bytes 2021891811 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65262895  bytes 95926403251 (95.9 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2464032  bytes 486667847 (486.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2464032  bytes 486667847 (486.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29696465  bytes 2022061934 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65268680  bytes 95934973366 (95.9 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2464186  bytes 486688855 (486.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2464186  bytes 486688855 (486.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29698622  bytes 2022207794 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65273180  bytes 95941619819 (95.9 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2464322  bytes 486707563 (486.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2464322  bytes 486707563 (486.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29700861  bytes 2022369785 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65277646  bytes 95948158470 (95.9 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2464479  bytes 486728743 (486.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2464479  bytes 486728743 (486.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29702365  bytes 2022476203 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65280670  bytes 95952558729 (95.9 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2464629  bytes 486748399 (486.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2464629  bytes 486748399 (486.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29704516  bytes 2022621239 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65285334  bytes 95959455216 (95.9 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2464771  bytes 486767409 (486.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2464771  bytes 486767409 (486.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29706428  bytes 2022755398 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65290072  bytes 95966455910 (95.9 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2464929  bytes 486788555 (486.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2464929  bytes 486788555 (486.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29708365  bytes 2022893651 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65294509  bytes 95973016057 (95.9 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2465064  bytes 486807055 (486.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2465064  bytes 486807055 (486.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29710463  bytes 2023042128 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65299306  bytes 95980068284 (95.9 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2465223  bytes 486828343 (486.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2465223  bytes 486828343 (486.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29712554  bytes 2023184457 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65304323  bytes 95987462017 (95.9 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2465392  bytes 486849174 (486.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2465392  bytes 486849174 (486.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29714698  bytes 2023334872 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65309071  bytes 95994475098 (95.9 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2465532  bytes 486868196 (486.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2465532  bytes 486868196 (486.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29716308  bytes 2023453895 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65312517  bytes 95999536912 (95.9 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2465670  bytes 486888066 (486.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2465670  bytes 486888066 (486.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29718627  bytes 2023612761 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65317151  bytes 96006391065 (96.0 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2465811  bytes 486906998 (486.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2465811  bytes 486906998 (486.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29720686  bytes 2023761875 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65321636  bytes 96012970270 (96.0 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2465965  bytes 486928000 (486.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2465965  bytes 486928000 (486.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29723129  bytes 2023921812 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65327313  bytes 96021398072 (96.0 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2466116  bytes 486947753 (486.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2466116  bytes 486947753 (486.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29726518  bytes 2024131946 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65335059  bytes 96032931702 (96.0 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2466260  bytes 486966899 (486.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2466260  bytes 486966899 (486.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29730726  bytes 2024385316 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65343267  bytes 96045160546 (96.0 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2466419  bytes 486988241 (486.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2466419  bytes 486988241 (486.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29732635  bytes 2024511432 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65347610  bytes 96051587295 (96.0 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2466548  bytes 487006515 (487.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2466548  bytes 487006515 (487.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29735453  bytes 2024696479 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65353647  bytes 96060510305 (96.0 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2466709  bytes 487027987 (487.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2466709  bytes 487027987 (487.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29738069  bytes 2024861379 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65359725  bytes 96069564982 (96.0 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2466850  bytes 487047018 (487.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2466850  bytes 487047018 (487.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29740741  bytes 2025037675 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65365728  bytes 96078457504 (96.0 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2467009  bytes 487067148 (487.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2467009  bytes 487067148 (487.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29742981  bytes 2025182986 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65371015  bytes 96086293578 (96.0 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2467168  bytes 487088406 (487.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2467168  bytes 487088406 (487.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29744475  bytes 2025290018 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65374581  bytes 96091539722 (96.0 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2467304  bytes 487107008 (487.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2467304  bytes 487107008 (487.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29747170  bytes 2025465868 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65380219  bytes 96099878297 (96.0 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2467466  bytes 487128522 (487.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2467466  bytes 487128522 (487.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29748952  bytes 2025587161 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65384585  bytes 96106343949 (96.1 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2467597  bytes 487146900 (487.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2467597  bytes 487146900 (487.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29750798  bytes 2025714349 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65388922  bytes 96112708508 (96.1 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2467768  bytes 487167718 (487.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2467768  bytes 487167718 (487.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29753835  bytes 2025905772 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65395686  bytes 96122764446 (96.1 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2467919  bytes 487188536 (487.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2467919  bytes 487188536 (487.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29755104  bytes 2026003218 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65398765  bytes 96127276630 (96.1 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2468053  bytes 487207058 (487.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2468053  bytes 487207058 (487.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29757731  bytes 2026175885 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65404182  bytes 96135281966 (96.1 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2468209  bytes 487228164 (487.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2468209  bytes 487228164 (487.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29759389  bytes 2026284895 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65407205  bytes 96139727921 (96.1 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2468334  bytes 487246218 (487.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2468334  bytes 487246218 (487.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29760737  bytes 2026395076 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65410234  bytes 96144127272 (96.1 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2468491  bytes 487266141 (487.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2468491  bytes 487266141 (487.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29762952  bytes 2026548825 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65415112  bytes 96151323880 (96.1 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2468646  bytes 487287229 (487.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2468646  bytes 487287229 (487.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29764434  bytes 2026650924 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65418554  bytes 96156397722 (96.1 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2468772  bytes 487305299 (487.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2468772  bytes 487305299 (487.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29766885  bytes 2026813095 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65424017  bytes 96164482052 (96.1 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2468927  bytes 487326269 (487.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2468927  bytes 487326269 (487.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29769998  bytes 2027010668 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65430108  bytes 96173521504 (96.1 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2469073  bytes 487345615 (487.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2469073  bytes 487345615 (487.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29771547  bytes 2027120715 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65433904  bytes 96179070406 (96.1 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2469232  bytes 487365739 (487.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2469232  bytes 487365739 (487.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29773808  bytes 2027263949 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65439019  bytes 96186655465 (96.1 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2469373  bytes 487385917 (487.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2469373  bytes 487385917 (487.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29775895  bytes 2027406748 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65443972  bytes 96193995364 (96.1 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2469514  bytes 487404873 (487.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2469514  bytes 487404873 (487.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29778081  bytes 2027549662 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65448524  bytes 96200734382 (96.2 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2469651  bytes 487424725 (487.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2469651  bytes 487424725 (487.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29780480  bytes 2027710265 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65453950  bytes 96208759114 (96.2 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2469804  bytes 487444573 (487.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2469804  bytes 487444573 (487.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29782709  bytes 2027862585 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65459563  bytes 96217053550 (96.2 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2469976  bytes 487465548 (487.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2469976  bytes 487465548 (487.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29786057  bytes 2028071278 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65467406  bytes 96228753257 (96.2 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2470127  bytes 487486318 (487.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2470127  bytes 487486318 (487.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29788812  bytes 2028239558 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65474067  bytes 96238689866 (96.2 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2470269  bytes 487505398 (487.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2470269  bytes 487505398 (487.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29790759  bytes 2028384920 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65478397  bytes 96245054834 (96.2 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2470416  bytes 487525830 (487.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2470416  bytes 487525830 (487.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29792980  bytes 2028534820 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65482169  bytes 96250572310 (96.2 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2470569  bytes 487545666 (487.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2470569  bytes 487545666 (487.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29796037  bytes 2028731395 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65488285  bytes 96259642972 (96.2 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2470724  bytes 487565546 (487.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2470724  bytes 487565546 (487.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29799074  bytes 2028933576 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65495080  bytes 96269730941 (96.2 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2470877  bytes 487586656 (487.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2470877  bytes 487586656 (487.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29800679  bytes 2029041236 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65498587  bytes 96274903343 (96.2 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2471009  bytes 487605050 (487.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2471009  bytes 487605050 (487.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29802815  bytes 2029191709 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65502625  bytes 96280843241 (96.2 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2471153  bytes 487625160 (487.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2471153  bytes 487625160 (487.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29805650  bytes 2029371909 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65509043  bytes 96290379919 (96.2 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2471293  bytes 487644246 (487.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2471293  bytes 487644246 (487.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29807050  bytes 2029476982 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65512175  bytes 96294942890 (96.2 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2471463  bytes 487665072 (487.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2471463  bytes 487665072 (487.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29809335  bytes 2029626640 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65517170  bytes 96302333555 (96.3 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2471616  bytes 487686076 (487.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2471616  bytes 487686076 (487.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29812320  bytes 2029814283 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65524219  bytes 96312857481 (96.3 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2471739  bytes 487703906 (487.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2471739  bytes 487703906 (487.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29816180  bytes 2030053610 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65532734  bytes 96325572674 (96.3 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2471878  bytes 487723922 (487.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2471878  bytes 487723922 (487.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29819100  bytes 2030244130 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65539469  bytes 96335576758 (96.3 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2472030  bytes 487743730 (487.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2472030  bytes 487743730 (487.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29820049  bytes 2030316464 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65541557  bytes 96338595275 (96.3 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2472169  bytes 487762565 (487.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2472169  bytes 487762565 (487.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29824611  bytes 2030594963 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65551799  bytes 96353881674 (96.3 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2472344  bytes 487784935 (487.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2472344  bytes 487784935 (487.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29826479  bytes 2030722814 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65556034  bytes 96360144633 (96.3 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2472477  bytes 487803381 (487.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2472477  bytes 487803381 (487.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29828326  bytes 2030844444 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65560214  bytes 96366313817 (96.3 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2472622  bytes 487823663 (487.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2472622  bytes 487823663 (487.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29829899  bytes 2030956243 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65563692  bytes 96371403941 (96.3 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2472775  bytes 487843487 (487.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2472775  bytes 487843487 (487.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29831882  bytes 2031087505 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65568379  bytes 96378344386 (96.3 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2472901  bytes 487861485 (487.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2472901  bytes 487861485 (487.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29834131  bytes 2031241851 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65573426  bytes 96385783431 (96.3 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2473079  bytes 487883935 (487.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2473079  bytes 487883935 (487.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29835877  bytes 2031364564 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65577253  bytes 96391421961 (96.3 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2473220  bytes 487902905 (487.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2473220  bytes 487902905 (487.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29838611  bytes 2031542641 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65583282  bytes 96400370722 (96.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2473372  bytes 487923691 (487.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2473372  bytes 487923691 (487.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29840276  bytes 2031663927 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65587023  bytes 96405850209 (96.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2473514  bytes 487942811 (487.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2473514  bytes 487942811 (487.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29842274  bytes 2031802557 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65591861  bytes 96413021074 (96.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2473648  bytes 487961415 (487.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2473648  bytes 487961415 (487.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29845273  bytes 2031998924 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65598543  bytes 96422919389 (96.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2473831  bytes 487984220 (487.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2473831  bytes 487984220 (487.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29846699  bytes 2032110151 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65601755  bytes 96427619805 (96.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2473966  bytes 488002758 (488.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2473966  bytes 488002758 (488.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29848756  bytes 2032251738 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65606279  bytes 96434301585 (96.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2474108  bytes 488022894 (488.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2474108  bytes 488022894 (488.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29850621  bytes 2032385285 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65610620  bytes 96440684377 (96.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2474263  bytes 488042842 (488.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2474263  bytes 488042842 (488.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29852763  bytes 2032536126 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65614929  bytes 96447033550 (96.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2474404  bytes 488061976 (488.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2474404  bytes 488061976 (488.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29855458  bytes 2032719148 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65620859  bytes 96455778998 (96.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2474590  bytes 488084949 (488.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2474590  bytes 488084949 (488.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29857114  bytes 2032837471 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65624042  bytes 96460451566 (96.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2474715  bytes 488102943 (488.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2474715  bytes 488102943 (488.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29859461  bytes 2032994306 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65628608  bytes 96467181583 (96.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2474863  bytes 488123451 (488.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2474863  bytes 488123451 (488.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29861680  bytes 2033139801 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65633071  bytes 96473781569 (96.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2474997  bytes 488142131 (488.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2474997  bytes 488142131 (488.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29865044  bytes 2033347111 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65639632  bytes 96483531503 (96.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2475139  bytes 488161331 (488.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2475139  bytes 488161331 (488.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29867234  bytes 2033491432 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65644255  bytes 96490332660 (96.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2475307  bytes 488183238 (488.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2475307  bytes 488183238 (488.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29870626  bytes 2033705696 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65649818  bytes 96498578676 (96.4 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2475444  bytes 488202082 (488.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2475444  bytes 488202082 (488.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29873598  bytes 2033890252 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65655452  bytes 96506926381 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2475582  bytes 488222046 (488.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2475582  bytes 488222046 (488.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29875833  bytes 2034035118 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65660362  bytes 96514216689 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2475710  bytes 488240338 (488.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2475710  bytes 488240338 (488.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29877820  bytes 2034172053 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65664797  bytes 96520750795 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2475850  bytes 488259272 (488.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2475850  bytes 488259272 (488.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29881844  bytes 2034423509 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65672982  bytes 96532895895 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2476033  bytes 488282054 (488.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2476033  bytes 488282054 (488.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29885110  bytes 2034628593 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65679485  bytes 96542583444 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2476165  bytes 488300542 (488.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2476165  bytes 488300542 (488.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29887889  bytes 2034799431 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65685535  bytes 96551576680 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2476310  bytes 488320824 (488.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2476310  bytes 488320824 (488.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29890118  bytes 2034942442 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65690344  bytes 96558702914 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2476441  bytes 488339212 (488.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2476441  bytes 488339212 (488.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29891631  bytes 2035054875 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65692963  bytes 96562490515 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2476577  bytes 488357936 (488.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2476577  bytes 488357936 (488.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29896854  bytes 2035375138 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65703197  bytes 96577724070 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2476772  bytes 488381592 (488.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2476772  bytes 488381592 (488.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29900971  bytes 2035626519 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65712270  bytes 96591270639 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2476910  bytes 488400510 (488.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2476910  bytes 488400510 (488.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29901487  bytes 2035669700 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65713390  bytes 96592834369 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2477042  bytes 488419950 (488.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2477042  bytes 488419950 (488.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29901546  bytes 2035683226 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65713471  bytes 96592849009 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2477153  bytes 488436910 (488.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2477153  bytes 488436910 (488.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29901625  bytes 2035701080 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65713579  bytes 96592868338 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2477285  bytes 488455324 (488.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2477285  bytes 488455324 (488.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29901715  bytes 2035720358 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65713695  bytes 96592888376 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2477456  bytes 488477460 (488.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2477456  bytes 488477460 (488.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request
    self._validate_conn(conn)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn
    conn.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPSConnection object at 0x7fa9a3dcc0>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7fa9a3dcc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7fa9a3dcc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29901729  bytes 2035721301 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65713721  bytes 96592890314 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2477470  bytes 488478414 (488.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2477470  bytes 488478414 (488.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request
    self._validate_conn(conn)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn
    conn.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPSConnection object at 0x7f79d86c50>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f79d86c50>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f79d86c50>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29901747  bytes 2035723241 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65713762  bytes 96592893500 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2477507  bytes 488482069 (488.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2477507  bytes 488482069 (488.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request
    self._validate_conn(conn)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn
    conn.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPSConnection object at 0x7fac15bcc0>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7fac15bcc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7fac15bcc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29901757  bytes 2035723952 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65713795  bytes 96592895956 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2477527  bytes 488483489 (488.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2477527  bytes 488483489 (488.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request
    self._validate_conn(conn)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn
    conn.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPSConnection object at 0x7f81f6fcc0>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f81f6fcc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f81f6fcc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29901770  bytes 2035724819 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65713846  bytes 96592900128 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2477558  bytes 488485651 (488.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2477558  bytes 488485651 (488.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request
    self._validate_conn(conn)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn
    conn.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPSConnection object at 0x7fb4690c50>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7fb4690c50>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7fb4690c50>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29901796  bytes 2035727832 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65713910  bytes 96592905448 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2477619  bytes 488490919 (488.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2477619  bytes 488490919 (488.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request
    self._validate_conn(conn)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn
    conn.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPSConnection object at 0x7f9a349cc0>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f9a349cc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f9a349cc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29901829  bytes 2035732865 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65713977  bytes 96592913131 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2477663  bytes 488494105 (488.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2477663  bytes 488494105 (488.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request
    self._validate_conn(conn)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn
    conn.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPSConnection object at 0x7f89f58cc0>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f89f58cc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f89f58cc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29901849  bytes 2035735127 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65714035  bytes 96592917461 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2477722  bytes 488499429 (488.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2477722  bytes 488499429 (488.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request
    self._validate_conn(conn)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn
    conn.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPSConnection object at 0x7f7a845cc0>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f7a845cc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f7a845cc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29901860  bytes 2035735929 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65714081  bytes 96592920894 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2477756  bytes 488501935 (488.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2477756  bytes 488501935 (488.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request
    self._validate_conn(conn)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn
    conn.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPSConnection object at 0x7f8f84ccc0>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f8f84ccc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f8f84ccc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29901871  bytes 2035736704 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65714133  bytes 96592924769 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2477800  bytes 488505098 (488.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2477800  bytes 488505098 (488.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request
    self._validate_conn(conn)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn
    conn.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPSConnection object at 0x7f9fa2dc50>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f9fa2dc50>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f9fa2dc50>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29901884  bytes 2035738171 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65714195  bytes 96592929411 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2477853  bytes 488509900 (488.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2477853  bytes 488509900 (488.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request
    self._validate_conn(conn)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn
    conn.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPSConnection object at 0x7f84108cc0>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f84108cc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f84108cc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29901916  bytes 2035743114 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65714268  bytes 96592937682 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2477910  bytes 488513770 (488.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2477910  bytes 488513770 (488.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request
    self._validate_conn(conn)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn
    conn.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPSConnection object at 0x7f8e712cc0>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f8e712cc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f8e712cc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29901955  bytes 2035750188 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65714352  bytes 96592947201 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2478012  bytes 488526781 (488.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2478012  bytes 488526781 (488.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request
    self._validate_conn(conn)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn
    conn.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPSConnection object at 0x7f8a4dbcc0>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f8a4dbcc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f8a4dbcc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29901988  bytes 2035755779 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65714429  bytes 96592956199 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2478093  bytes 488537286 (488.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2478093  bytes 488537286 (488.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request
    self._validate_conn(conn)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn
    conn.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPSConnection object at 0x7fa3eddcc0>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7fa3eddcc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7fa3eddcc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29902017  bytes 2035761336 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65714510  bytes 96592965365 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2478196  bytes 488549388 (488.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2478196  bytes 488549388 (488.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request
    self._validate_conn(conn)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn
    conn.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPSConnection object at 0x7f9b165cc0>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f9b165cc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f9b165cc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29902058  bytes 2035768085 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65714597  bytes 96592975080 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2478300  bytes 488562542 (488.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2478300  bytes 488562542 (488.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request
    self._validate_conn(conn)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn
    conn.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPSConnection object at 0x7f88c11c50>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f88c11c50>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f88c11c50>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29902106  bytes 2035777558 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65714693  bytes 96592988213 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2478408  bytes 488574763 (488.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2478408  bytes 488574763 (488.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request
    self._validate_conn(conn)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn
    conn.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPSConnection object at 0x7fa6653cc0>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7fa6653cc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7fa6653cc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29902142  bytes 2035783989 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65714781  bytes 96592997978 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2478508  bytes 488587729 (488.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2478508  bytes 488587729 (488.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request
    self._validate_conn(conn)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn
    conn.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPSConnection object at 0x7f7adfac50>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f7adfac50>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f7adfac50>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29902175  bytes 2035789655 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65714860  bytes 96593007040 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2478592  bytes 488598493 (488.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2478592  bytes 488598493 (488.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request
    self._validate_conn(conn)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn
    conn.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPSConnection object at 0x7f98501cc0>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f98501cc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f98501cc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29902211  bytes 2035795622 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65714948  bytes 96593017284 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2478690  bytes 488610290 (488.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2478690  bytes 488610290 (488.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request
    self._validate_conn(conn)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn
    conn.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPSConnection object at 0x7f7e08ac50>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f7e08ac50>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f7e08ac50>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29902247  bytes 2035802089 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65715039  bytes 96593027362 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2478788  bytes 488622987 (488.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2478788  bytes 488622987 (488.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request
    self._validate_conn(conn)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn
    conn.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPSConnection object at 0x7f77ca4c50>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f77ca4c50>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f77ca4c50>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29902302  bytes 2035812076 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65715147  bytes 96593041599 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2478901  bytes 488635575 (488.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2478901  bytes 488635575 (488.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request
    self._validate_conn(conn)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn
    conn.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPSConnection object at 0x7f9573bc50>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f9573bc50>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f9573bc50>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29902339  bytes 2035818605 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65715227  bytes 96593050840 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2478992  bytes 488647859 (488.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2478992  bytes 488647859 (488.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request
    self._validate_conn(conn)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn
    conn.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPSConnection object at 0x7faba1fc50>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7faba1fc50>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7faba1fc50>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29902369  bytes 2035824164 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65715316  bytes 96593060666 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2479088  bytes 488659624 (488.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2479088  bytes 488659624 (488.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request
    self._validate_conn(conn)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn
    conn.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPSConnection object at 0x7fad0afc50>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7fad0afc50>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7fad0afc50>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29902403  bytes 2035829881 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65715406  bytes 96593070531 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2479199  bytes 488672234 (488.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2479199  bytes 488672234 (488.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request
    self._validate_conn(conn)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn
    conn.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPSConnection object at 0x7f99b75c50>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f99b75c50>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f99b75c50>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29902443  bytes 2035836474 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65715493  bytes 96593080245 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2479302  bytes 488685307 (488.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2479302  bytes 488685307 (488.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request
    self._validate_conn(conn)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn
    conn.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPSConnection object at 0x7f77f8bcc0>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f77f8bcc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f77f8bcc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29902498  bytes 2035846479 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65715605  bytes 96593094621 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2479425  bytes 488698574 (488.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2479425  bytes 488698574 (488.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request
    self._validate_conn(conn)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn
    conn.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPSConnection object at 0x7f8a157cc0>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f8a157cc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f8a157cc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29902535  bytes 2035853028 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65715699  bytes 96593104866 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2479519  bytes 488711156 (488.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2479519  bytes 488711156 (488.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request
    self._validate_conn(conn)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn
    conn.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPSConnection object at 0x7f93b6cc50>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f93b6cc50>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f93b6cc50>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29902568  bytes 2035858507 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65715785  bytes 96593114356 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2479603  bytes 488721947 (488.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2479603  bytes 488721947 (488.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request
    self._validate_conn(conn)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn
    conn.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPSConnection object at 0x7f9bfc7cc0>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f9bfc7cc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f9bfc7cc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29902601  bytes 2035864042 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65715867  bytes 96593123598 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2479686  bytes 488732674 (488.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2479686  bytes 488732674 (488.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request
    self._validate_conn(conn)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn
    conn.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPSConnection object at 0x7f852d7cc0>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f852d7cc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f852d7cc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29902634  bytes 2035870391 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65715950  bytes 96593133072 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2479790  bytes 488745715 (488.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2479790  bytes 488745715 (488.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request
    self._validate_conn(conn)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn
    conn.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPSConnection object at 0x7f8c448c50>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f8c448c50>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f8c448c50>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29902689  bytes 2035880400 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65716068  bytes 96593147883 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2479915  bytes 488759235 (488.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2479915  bytes 488759235 (488.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request
    self._validate_conn(conn)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn
    conn.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPSConnection object at 0x7fa12a6cc0>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7fa12a6cc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7fa12a6cc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29902724  bytes 2035886786 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65716157  bytes 96593157724 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2480014  bytes 488772052 (488.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2480014  bytes 488772052 (488.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request
    self._validate_conn(conn)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn
    conn.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPSConnection object at 0x7f8a578cc0>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f8a578cc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f8a578cc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29902754  bytes 2035892109 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65716237  bytes 96593166750 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2480099  bytes 488782895 (488.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2480099  bytes 488782895 (488.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request
    self._validate_conn(conn)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn
    conn.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPSConnection object at 0x7fb5309cc0>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7fb5309cc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7fb5309cc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29902793  bytes 2035898044 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65716324  bytes 96593176378 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2480194  bytes 488794434 (488.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2480194  bytes 488794434 (488.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request
    self._validate_conn(conn)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn
    conn.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPSConnection object at 0x7fa7108cc0>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7fa7108cc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7fa7108cc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29902829  bytes 2035904538 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65716409  bytes 96593185951 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2480292  bytes 488807013 (488.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2480292  bytes 488807013 (488.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request
    self._validate_conn(conn)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn
    conn.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPSConnection object at 0x7f832f3cc0>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f832f3cc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f832f3cc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29902884  bytes 2035914631 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65716523  bytes 96593200455 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2480418  bytes 488820588 (488.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2480418  bytes 488820588 (488.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request
    self._validate_conn(conn)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn
    conn.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPSConnection object at 0x7fa97b7cc0>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7fa97b7cc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7fa97b7cc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29902923  bytes 2035921280 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65716604  bytes 96593209755 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2480512  bytes 488833113 (488.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2480512  bytes 488833113 (488.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request
    self._validate_conn(conn)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn
    conn.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPSConnection object at 0x7fb197ecc0>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7fb197ecc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7fb197ecc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29902953  bytes 2035926671 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65716684  bytes 96593218928 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2480593  bytes 488843690 (488.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2480593  bytes 488843690 (488.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request
    self._validate_conn(conn)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn
    conn.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPSConnection object at 0x7f8177bc50>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f8177bc50>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f8177bc50>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29902990  bytes 2035932724 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65716774  bytes 96593228863 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2480695  bytes 488855860 (488.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2480695  bytes 488855860 (488.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request
    self._validate_conn(conn)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn
    conn.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPSConnection object at 0x7fa69bbcc0>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7fa69bbcc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7fa69bbcc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29903030  bytes 2035939405 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65716863  bytes 96593239823 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2480797  bytes 488868788 (488.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2480797  bytes 488868788 (488.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request
    self._validate_conn(conn)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn
    conn.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPSConnection object at 0x7f8b0cccc0>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f8b0cccc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f8b0cccc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29903085  bytes 2035948382 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65716973  bytes 96593254116 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2480925  bytes 488882432 (488.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2480925  bytes 488882432 (488.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request
    self._validate_conn(conn)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn
    conn.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPSConnection object at 0x7f99bf1cc0>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f99bf1cc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f99bf1cc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29903123  bytes 2035955959 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65717063  bytes 96593264073 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2481011  bytes 488894416 (488.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2481011  bytes 488894416 (488.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request
    self._validate_conn(conn)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn
    conn.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPSConnection object at 0x7f9f86dcc0>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f9f86dcc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f9f86dcc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29903151  bytes 2035961329 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65717148  bytes 96593273567 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2481098  bytes 488905494 (488.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2481098  bytes 488905494 (488.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request
    self._validate_conn(conn)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn
    conn.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPSConnection object at 0x7f96009cc0>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f96009cc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f96009cc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29903180  bytes 2035966736 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65717232  bytes 96593283017 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2481189  bytes 488916853 (488.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2481189  bytes 488916853 (488.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request
    self._validate_conn(conn)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn
    conn.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPSConnection object at 0x7f7cf56cc0>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f7cf56cc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f7cf56cc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29903214  bytes 2035973062 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65717317  bytes 96593292602 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2481287  bytes 488929526 (488.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2481287  bytes 488929526 (488.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request
    self._validate_conn(conn)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn
    conn.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPSConnection object at 0x7f9ac2fcc0>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f9ac2fcc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f9ac2fcc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29903252  bytes 2035979011 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65717405  bytes 96593302542 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2481394  bytes 488941765 (488.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2481394  bytes 488941765 (488.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request
    self._validate_conn(conn)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn
    conn.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPSConnection object at 0x7f79d71cc0>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f79d71cc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f79d71cc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29903314  bytes 2035990144 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65717517  bytes 96593317142 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2481508  bytes 488955550 (488.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2481508  bytes 488955550 (488.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request
    self._validate_conn(conn)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn
    conn.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPSConnection object at 0x7fad5b0cc0>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7fad5b0cc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7fad5b0cc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29903345  bytes 2035995619 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65717598  bytes 96593326302 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2481588  bytes 488966121 (488.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2481588  bytes 488966121 (488.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request
    self._validate_conn(conn)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn
    conn.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPSConnection object at 0x7fa3d10cc0>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7fa3d10cc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7fa3d10cc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29903374  bytes 2036000977 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65717675  bytes 96593335229 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2481671  bytes 488976906 (488.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2481671  bytes 488976906 (488.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request
    self._validate_conn(conn)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn
    conn.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPSConnection object at 0x7fa9230c50>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7fa9230c50>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7fa9230c50>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29903407  bytes 2036007314 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65717767  bytes 96593345358 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2481773  bytes 488989914 (488.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2481773  bytes 488989914 (488.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request
    self._validate_conn(conn)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn
    conn.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPSConnection object at 0x7fb2396cc0>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7fb2396cc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7fb2396cc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29903440  bytes 2036012945 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65717855  bytes 96593355091 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2481868  bytes 489001470 (489.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2481868  bytes 489001470 (489.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request
    self._validate_conn(conn)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn
    conn.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPSConnection object at 0x7f9d394c50>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f9d394c50>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f9d394c50>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29903504  bytes 2036024221 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65717963  bytes 96593369301 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2482004  bytes 489016725 (489.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2482004  bytes 489016725 (489.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request
    self._validate_conn(conn)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn
    conn.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPSConnection object at 0x7fa8a89cc0>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7fa8a89cc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7fa8a89cc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29903535  bytes 2036029720 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65718044  bytes 96593378497 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2482085  bytes 489027230 (489.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2482085  bytes 489027230 (489.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request
    self._validate_conn(conn)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn
    conn.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPSConnection object at 0x7f90df6cc0>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f90df6cc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f90df6cc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29903561  bytes 2036034871 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65718128  bytes 96593387859 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2482171  bytes 489038113 (489.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2482171  bytes 489038113 (489.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request
    self._validate_conn(conn)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn
    conn.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPSConnection object at 0x7fa9548c50>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7fa9548c50>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7fa9548c50>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29903601  bytes 2036041699 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65718214  bytes 96593397571 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2482281  bytes 489051675 (489.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2482281  bytes 489051675 (489.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request
    self._validate_conn(conn)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn
    conn.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPSConnection object at 0x7f7cb58cc0>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f7cb58cc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f7cb58cc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29903628  bytes 2036046938 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65718290  bytes 96593406381 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2482377  bytes 489063248 (489.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2482377  bytes 489063248 (489.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request
    self._validate_conn(conn)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn
    conn.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPSConnection object at 0x7fa308ccc0>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7fa308ccc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7fa308ccc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29903683  bytes 2036057540 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65718397  bytes 96593420533 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2482484  bytes 489076486 (489.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2482484  bytes 489076486 (489.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request
    self._validate_conn(conn)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn
    conn.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPSConnection object at 0x7f7b01acc0>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f7b01acc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f7b01acc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29903717  bytes 2036063198 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65718474  bytes 96593429402 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2482573  bytes 489087652 (489.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2482573  bytes 489087652 (489.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request
    self._validate_conn(conn)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn
    conn.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPSConnection object at 0x7f81e61cc0>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f81e61cc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f81e61cc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29903750  bytes 2036068760 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65718548  bytes 96593438099 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2482651  bytes 489098039 (489.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2482651  bytes 489098039 (489.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request
    self._validate_conn(conn)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn
    conn.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPSConnection object at 0x7fa01cdcc0>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7fa01cdcc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7fa01cdcc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29903788  bytes 2036075344 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65718634  bytes 96593447738 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2482765  bytes 489111961 (489.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2482765  bytes 489111961 (489.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request
    self._validate_conn(conn)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn
    conn.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPSConnection object at 0x7f8d53ecc0>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f8d53ecc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f8d53ecc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29903817  bytes 2036080808 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65718715  bytes 96593456960 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2482863  bytes 489123629 (489.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2482863  bytes 489123629 (489.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request
    self._validate_conn(conn)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn
    conn.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPSConnection object at 0x7fb1eebc50>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7fb1eebc50>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7fb1eebc50>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29903871  bytes 2036091384 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65718813  bytes 96593470406 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2482982  bytes 489137727 (489.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2482982  bytes 489137727 (489.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request
    self._validate_conn(conn)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn
    conn.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPSConnection object at 0x7f9caf3cc0>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f9caf3cc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f9caf3cc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29903899  bytes 2036096675 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65718879  bytes 96593478528 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2483057  bytes 489147908 (489.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2483057  bytes 489147908 (489.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request
    self._validate_conn(conn)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn
    conn.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPSConnection object at 0x7f9b43fcc0>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f9b43fcc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f9b43fcc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29903926  bytes 2036101922 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65718948  bytes 96593486840 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2483139  bytes 489158583 (489.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2483139  bytes 489158583 (489.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request
    self._validate_conn(conn)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn
    conn.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPSConnection object at 0x7f8f0f7cc0>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f8f0f7cc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f8f0f7cc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29903959  bytes 2036108203 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65719021  bytes 96593495592 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2483234  bytes 489171147 (489.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2483234  bytes 489171147 (489.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request
    self._validate_conn(conn)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn
    conn.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPSConnection object at 0x7f941a6cc0>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f941a6cc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f941a6cc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29903993  bytes 2036113900 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65719093  bytes 96593504154 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2483328  bytes 489182611 (489.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2483328  bytes 489182611 (489.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request
    self._validate_conn(conn)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn
    conn.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPSConnection object at 0x7fb3851cc0>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7fb3851cc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7fb3851cc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29904054  bytes 2036124822 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65719199  bytes 96593518117 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2483462  bytes 489197789 (489.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2483462  bytes 489197789 (489.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request
    self._validate_conn(conn)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn
    conn.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPSConnection object at 0x7fb63d6cc0>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7fb63d6cc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7fb63d6cc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29904087  bytes 2036130535 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65719274  bytes 96593526901 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2483554  bytes 489209258 (489.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2483554  bytes 489209258 (489.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request
    self._validate_conn(conn)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn
    conn.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPSConnection object at 0x7f7fd9acc0>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f7fd9acc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f7fd9acc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29904114  bytes 2036135843 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65719344  bytes 96593535317 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2483637  bytes 489220082 (489.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2483637  bytes 489220082 (489.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request
    self._validate_conn(conn)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn
    conn.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPSConnection object at 0x7fa8f8bcc0>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7fa8f8bcc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7fa8f8bcc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29904144  bytes 2036141776 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65719411  bytes 96593543475 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2483730  bytes 489232481 (489.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2483730  bytes 489232481 (489.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request
    self._validate_conn(conn)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn
    conn.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPSConnection object at 0x7f7dd8acc0>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f7dd8acc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f7dd8acc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29904178  bytes 2036147375 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65719474  bytes 96593551311 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2483824  bytes 489243831 (489.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2483824  bytes 489243831 (489.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request
    self._validate_conn(conn)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn
    conn.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPSConnection object at 0x7f7e502cc0>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f7e502cc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f7e502cc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29904245  bytes 2036158856 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65719580  bytes 96593565293 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2483959  bytes 489258945 (489.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2483959  bytes 489258945 (489.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request
    self._validate_conn(conn)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn
    conn.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPSConnection object at 0x7f9c68acc0>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f9c68acc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f9c68acc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29904274  bytes 2036164250 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65719643  bytes 96593573168 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2484042  bytes 489269730 (489.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2484042  bytes 489269730 (489.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request
    self._validate_conn(conn)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn
    conn.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPSConnection object at 0x7f8694bcc0>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f8694bcc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f8694bcc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29904302  bytes 2036169643 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65719706  bytes 96593581069 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2484131  bytes 489280898 (489.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2484131  bytes 489280898 (489.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request
    self._validate_conn(conn)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn
    conn.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPSConnection object at 0x7faf20ecc0>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7faf20ecc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7faf20ecc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29904335  bytes 2036175968 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65719774  bytes 96593589371 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2484226  bytes 489293463 (489.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2484226  bytes 489293463 (489.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request
    self._validate_conn(conn)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn
    conn.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPSConnection object at 0x7fa35a9cc0>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7fa35a9cc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7fa35a9cc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29904368  bytes 2036181712 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65719845  bytes 96593597883 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2484328  bytes 489305407 (489.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2484328  bytes 489305407 (489.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request
    self._validate_conn(conn)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn
    conn.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPSConnection object at 0x7f7a8a8cc0>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f7a8a8cc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f7a8a8cc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29904412  bytes 2036188917 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65719935  bytes 96593608063 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2484471  bytes 489321164 (489.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2484471  bytes 489321164 (489.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request
    self._validate_conn(conn)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn
    conn.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPSConnection object at 0x7f9569dcc0>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f9569dcc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f9569dcc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29904457  bytes 2036198192 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65720012  bytes 96593619648 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2484559  bytes 489332269 (489.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2484559  bytes 489332269 (489.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request
    self._validate_conn(conn)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn
    conn.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPSConnection object at 0x7fa2391cc0>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7fa2391cc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7fa2391cc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29904487  bytes 2036203619 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65720071  bytes 96593627220 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2484634  bytes 489342438 (489.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2484634  bytes 489342438 (489.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request
    self._validate_conn(conn)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn
    conn.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPSConnection object at 0x7f85ce1cc0>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f85ce1cc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f85ce1cc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29904523  bytes 2036210061 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65720140  bytes 96593635609 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2484726  bytes 489354785 (489.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2484726  bytes 489354785 (489.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request
    self._validate_conn(conn)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn
    conn.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPSConnection object at 0x7f98ef6cc0>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f98ef6cc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f98ef6cc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29904552  bytes 2036215519 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65720206  bytes 96593643729 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2484826  bytes 489366577 (489.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2484826  bytes 489366577 (489.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request
    self._validate_conn(conn)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn
    conn.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPSConnection object at 0x7f81710c50>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f81710c50>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f81710c50>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/13052025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 29904590  bytes 2036222192 (2.0 GB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 65720287  bytes 96593653128 (96.5 GB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 2484950  bytes 489380974 (489.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 2484950  bytes 489380974 (489.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/05/13/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request
    self._validate_conn(conn)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn
    conn.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPSConnection object at 0x7f8a0e9cc0>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f8a0e9cc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPSConnectionPool(host='marlene.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f8a0e9cc0>: Failed to establish a new connection: [Errno 110] Connection timed out',))
