erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 63381 bytes 15125081 (15.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 84890 bytes 18359494 (18.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 118219 bytes 20280218 (20.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 118219 bytes 20280218 (20.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. file /home/nano/.log/2025/07/10/decision/decision_log.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 63434 bytes 15139711 (15.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 84968 bytes 18373825 (18.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 118339 bytes 20297752 (20.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 118339 bytes 20297752 (20.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. file /home/nano/.log/2025/07/10/decision/decision_log.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 63535 bytes 15163099 (15.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 85093 bytes 18397271 (18.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 118486 bytes 20317134 (20.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 118486 bytes 20317134 (20.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. file /home/nano/.log/2025/07/10/decision/decision_log.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 63602 bytes 15179113 (15.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 85181 bytes 18412494 (18.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 118620 bytes 20336711 (20.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 118620 bytes 20336711 (20.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. file /home/nano/.log/2025/07/10/decision/decision_log.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 63657 bytes 15193740 (15.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 85258 bytes 18426682 (18.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 118742 bytes 20354349 (20.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 118742 bytes 20354349 (20.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. file /home/nano/.log/2025/07/10/decision/decision_log.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 63722 bytes 15209946 (15.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 85350 bytes 18442176 (18.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 118883 bytes 20374417 (20.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 118883 bytes 20374417 (20.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. file /home/nano/.log/2025/07/10/decision/decision_log.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 63776 bytes 15224548 (15.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 85430 bytes 18456690 (18.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 118999 bytes 20391805 (20.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 118999 bytes 20391805 (20.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. file /home/nano/.log/2025/07/10/decision/decision_log.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 63875 bytes 15247901 (15.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 85551 bytes 18479899 (18.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 119150 bytes 20411422 (20.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 119150 bytes 20411422 (20.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. file /home/nano/.log/2025/07/10/decision/decision_log.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok b'Error on request' Token e243aac39fb012c084cfefeb2a6a3641 is maybe invalid erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 63943 bytes 15263977 (15.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 85642 bytes 18495276 (18.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 119284 bytes 20431037 (20.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 119284 bytes 20431037 (20.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. file /home/nano/.log/2025/07/10/decision/decision_log.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 64000 bytes 15278771 (15.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 85722 bytes 18509834 (18.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 119405 bytes 20448623 (20.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 119405 bytes 20448623 (20.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. file /home/nano/.log/2025/07/10/decision/decision_log.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 64067 bytes 15294954 (15.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 85812 bytes 18525159 (18.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 119545 bytes 20468697 (20.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 119545 bytes 20468697 (20.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. file /home/nano/.log/2025/07/10/decision/decision_log.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 64127 bytes 15309721 (15.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 85887 bytes 18539364 (18.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 119658 bytes 20485831 (20.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 119658 bytes 20485831 (20.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. file /home/nano/.log/2025/07/10/decision/decision_log.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 64208 bytes 15328986 (15.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 85989 bytes 18558380 (18.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 119788 bytes 20503986 (20.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 119788 bytes 20503986 (20.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. file /home/nano/.log/2025/07/10/decision/decision_log.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 64291 bytes 15349303 (15.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 86101 bytes 18578340 (18.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 119939 bytes 20524754 (20.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 119939 bytes 20524754 (20.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. file /home/nano/.log/2025/07/10/decision/decision_log.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 64417 bytes 15380950 (15.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 86252 bytes 18609149 (18.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 120223 bytes 20570971 (20.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 120223 bytes 20570971 (20.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. file /home/nano/.log/2025/07/10/decision/decision_log.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 64510 bytes 15403972 (15.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 86373 bytes 18631239 (18.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 120425 bytes 20602295 (20.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 120425 bytes 20602295 (20.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. file /home/nano/.log/2025/07/10/decision/decision_log.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 64569 bytes 15418751 (15.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 86447 bytes 18645322 (18.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 120535 bytes 20619191 (20.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 120535 bytes 20619191 (20.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. file /home/nano/.log/2025/07/10/decision/decision_log.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 64653 bytes 15438062 (15.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 86551 bytes 18664516 (18.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 120669 bytes 20637704 (20.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 120669 bytes 20637704 (20.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. file /home/nano/.log/2025/07/10/decision/decision_log.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 65514 bytes 15504936 (15.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 88874 bytes 21997028 (21.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 121183 bytes 23843596 (23.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 121183 bytes 23843596 (23.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. file /home/nano/.log/2025/07/10/decision/decision_log.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 65577 bytes 15519959 (15.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 88953 bytes 22011445 (22.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 121307 bytes 23861362 (23.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 121307 bytes 23861362 (23.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. file /home/nano/.log/2025/07/10/decision/decision_log.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 65642 bytes 15535982 (15.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 89039 bytes 22026450 (22.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 121429 bytes 23880228 (23.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 121429 bytes 23880228 (23.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. file /home/nano/.log/2025/07/10/decision/decision_log.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 65699 bytes 15550645 (15.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 89118 bytes 22040823 (22.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 121541 bytes 23897370 (23.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 121541 bytes 23897370 (23.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. file /home/nano/.log/2025/07/10/decision/decision_log.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 65757 bytes 15565511 (15.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 89200 bytes 22055569 (22.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 121663 bytes 23915108 (23.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 121663 bytes 23915108 (23.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. file /home/nano/.log/2025/07/10/decision/decision_log.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 65859 bytes 15589779 (15.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 89329 bytes 22079263 (22.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 121822 bytes 23936392 (23.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 121822 bytes 23936392 (23.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. file /home/nano/.log/2025/07/10/decision/decision_log.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 65918 bytes 15604573 (15.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 89407 bytes 22093644 (22.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 121939 bytes 23953796 (23.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 121939 bytes 23953796 (23.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. file /home/nano/.log/2025/07/10/decision/decision_log.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 65985 bytes 15620720 (15.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 89496 bytes 22108871 (22.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 122072 bytes 23973412 (23.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 122072 bytes 23973412 (23.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. file /home/nano/.log/2025/07/10/decision/decision_log.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 66040 bytes 15635454 (15.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 89574 bytes 22123217 (22.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 122190 bytes 23990842 (23.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 122190 bytes 23990842 (23.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. file /home/nano/.log/2025/07/10/decision/decision_log.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok b'Error on request' Token e243aac39fb012c084cfefeb2a6a3641 is maybe invalid erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 66099 bytes 15650276 (15.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 89652 bytes 22137564 (22.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 122310 bytes 24008400 (24.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 122310 bytes 24008400 (24.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. file /home/nano/.log/2025/07/10/decision/decision_log.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 66208 bytes 15674856 (15.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 89784 bytes 22161556 (22.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 122467 bytes 24029604 (24.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 122467 bytes 24029604 (24.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. file /home/nano/.log/2025/07/10/decision/decision_log.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 66267 bytes 15689770 (15.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 89862 bytes 22175938 (22.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 122593 bytes 24047513 (24.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 122593 bytes 24047513 (24.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. file /home/nano/.log/2025/07/10/decision/decision_log.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 66343 bytes 15710769 (15.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 89961 bytes 22192555 (22.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 122737 bytes 24067817 (24.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 122737 bytes 24067817 (24.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. file /home/nano/.log/2025/07/10/decision/decision_log.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 66406 bytes 15726226 (15.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 90046 bytes 22207353 (22.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 122859 bytes 24085515 (24.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 122859 bytes 24085515 (24.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. file /home/nano/.log/2025/07/10/decision/decision_log.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 66466 bytes 15741093 (15.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 90124 bytes 22221737 (22.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 122975 bytes 24102841 (24.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 122975 bytes 24102841 (24.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. file /home/nano/.log/2025/07/10/decision/decision_log.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 66572 bytes 15765316 (15.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 90252 bytes 22245488 (22.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 123125 bytes 24123546 (24.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 123125 bytes 24123546 (24.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. file /home/nano/.log/2025/07/10/decision/decision_log.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 66634 bytes 15780278 (15.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 90334 bytes 22260143 (22.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 123258 bytes 24141818 (24.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 123258 bytes 24141818 (24.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. file /home/nano/.log/2025/07/10/decision/decision_log.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 66699 bytes 15796222 (15.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 90420 bytes 22275178 (22.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 123389 bytes 24161364 (24.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 123389 bytes 24161364 (24.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. file /home/nano/.log/2025/07/10/decision/decision_log.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 66760 bytes 15811228 (15.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 90501 bytes 22289764 (22.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 123508 bytes 24178906 (24.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 123508 bytes 24178906 (24.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. file /home/nano/.log/2025/07/10/decision/decision_log.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 66821 bytes 15826258 (15.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 90582 bytes 22304302 (22.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 123633 bytes 24196822 (24.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 123633 bytes 24196822 (24.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. file /home/nano/.log/2025/07/10/decision/decision_log.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 66927 bytes 15850600 (15.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 90715 bytes 22328440 (22.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 123783 bytes 24217541 (24.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 123783 bytes 24217541 (24.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. file /home/nano/.log/2025/07/10/decision/decision_log.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 66986 bytes 15865415 (15.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 90794 bytes 22342891 (22.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 123905 bytes 24235218 (24.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 123905 bytes 24235218 (24.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. file /home/nano/.log/2025/07/10/decision/decision_log.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 67056 bytes 15881704 (15.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 90883 bytes 22358130 (22.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 124043 bytes 24255226 (24.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 124043 bytes 24255226 (24.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. file /home/nano/.log/2025/07/10/decision/decision_log.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 67111 bytes 15896405 (15.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 90961 bytes 22372473 (22.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 124158 bytes 24272500 (24.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 124158 bytes 24272500 (24.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. file /home/nano/.log/2025/07/10/decision/decision_log.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 67166 bytes 15910944 (15.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 91039 bytes 22386938 (22.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 124269 bytes 24289566 (24.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 124269 bytes 24289566 (24.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. file /home/nano/.log/2025/07/10/decision/decision_log.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 67274 bytes 15935715 (15.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 91174 bytes 22411221 (22.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 124432 bytes 24311083 (24.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 124432 bytes 24311083 (24.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. file /home/nano/.log/2025/07/10/decision/decision_log.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 67332 bytes 15950462 (15.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 91252 bytes 22425582 (22.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 124554 bytes 24328760 (24.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 124554 bytes 24328760 (24.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. file /home/nano/.log/2025/07/10/decision/decision_log.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 67400 bytes 15966542 (15.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 91340 bytes 22440818 (22.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 124682 bytes 24348078 (24.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 124682 bytes 24348078 (24.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. file /home/nano/.log/2025/07/10/decision/decision_log.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 67454 bytes 15981073 (15.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 91418 bytes 22455195 (22.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 124801 bytes 24365584 (24.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 124801 bytes 24365584 (24.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. file /home/nano/.log/2025/07/10/decision/decision_log.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 67509 bytes 15995879 (15.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 91498 bytes 22469700 (22.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 124916 bytes 24382858 (24.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 124916 bytes 24382858 (24.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. file /home/nano/.log/2025/07/10/decision/decision_log.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 67624 bytes 16020801 (16.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 91633 bytes 22494018 (22.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 125074 bytes 24404079 (24.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 125074 bytes 24404079 (24.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. file /home/nano/.log/2025/07/10/decision/decision_log.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 67681 bytes 16035635 (16.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 91712 bytes 22508476 (22.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 125199 bytes 24421971 (24.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 125199 bytes 24421971 (24.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. file /home/nano/.log/2025/07/10/decision/decision_log.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 67747 bytes 16051814 (16.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 91800 bytes 22523691 (22.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 125324 bytes 24441147 (24.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 125324 bytes 24441147 (24.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. file /home/nano/.log/2025/07/10/decision/decision_log.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 67808 bytes 16066792 (16.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 91880 bytes 22538243 (22.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 125438 bytes 24458369 (24.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 125438 bytes 24458369 (24.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. file /home/nano/.log/2025/07/10/decision/decision_log.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 67864 bytes 16081402 (16.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 91958 bytes 22552655 (22.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 125548 bytes 24475505 (24.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 125548 bytes 24475505 (24.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. file /home/nano/.log/2025/07/10/decision/decision_log.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 67951 bytes 16101694 (16.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 92065 bytes 22572124 (22.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 125677 bytes 24494823 (24.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 125677 bytes 24494823 (24.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. file /home/nano/.log/2025/07/10/decision/decision_log.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 68029 bytes 16120503 (16.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 92170 bytes 22591168 (22.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 125812 bytes 24513483 (24.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 125812 bytes 24513483 (24.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. file /home/nano/.log/2025/07/10/decision/decision_log.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 68099 bytes 16136824 (16.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 92261 bytes 22606555 (22.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 125943 bytes 24533069 (24.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 125943 bytes 24533069 (24.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. file /home/nano/.log/2025/07/10/decision/decision_log.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 68154 bytes 16151415 (16.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 92337 bytes 22620868 (22.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 126062 bytes 24550575 (24.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 126062 bytes 24550575 (24.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. file /home/nano/.log/2025/07/10/decision/decision_log.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 68212 bytes 16166157 (16.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 92418 bytes 22635650 (22.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 126167 bytes 24567175 (24.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 126167 bytes 24567175 (24.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. file /home/nano/.log/2025/07/10/decision/decision_log.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 68297 bytes 16186267 (16.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 92530 bytes 22655495 (22.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 126304 bytes 24587071 (24.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 126304 bytes 24587071 (24.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. file /home/nano/.log/2025/07/10/decision/decision_log.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 68373 bytes 16205182 (16.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 92636 bytes 22674639 (22.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 126440 bytes 24605799 (24.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 126440 bytes 24605799 (24.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. file /home/nano/.log/2025/07/10/decision/decision_log.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 68437 bytes 16221201 (16.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 92721 bytes 22689663 (22.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 126566 bytes 24625027 (24.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 126566 bytes 24625027 (24.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 68504 bytes 16241374 (16.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 92814 bytes 22705734 (22.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 126681 bytes 24642347 (24.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 126681 bytes 24642347 (24.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 68559 bytes 16256065 (16.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 92893 bytes 22720209 (22.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 126796 bytes 24659681 (24.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 126796 bytes 24659681 (24.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 68624 bytes 16271995 (16.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 92982 bytes 22735597 (22.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 126923 bytes 24678917 (24.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 126923 bytes 24678917 (24.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 68726 bytes 16295428 (16.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 93105 bytes 22758736 (22.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 127069 bytes 24698273 (24.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 127069 bytes 24698273 (24.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 68789 bytes 16311267 (16.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 93193 bytes 22773971 (22.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 127198 bytes 24717715 (24.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 127198 bytes 24717715 (24.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 68846 bytes 16325966 (16.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 93276 bytes 22788771 (22.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 127313 bytes 24735025 (24.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 127313 bytes 24735025 (24.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 68900 bytes 16340449 (16.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 93354 bytes 22803129 (22.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 127428 bytes 24752323 (24.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 127428 bytes 24752323 (24.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 68965 bytes 16356532 (16.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 93445 bytes 22818559 (22.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 127549 bytes 24771211 (24.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 127549 bytes 24771211 (24.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 69065 bytes 16379777 (16.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 93571 bytes 22842065 (22.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 127691 bytes 24790334 (24.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 127691 bytes 24790334 (24.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 69138 bytes 16396171 (16.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 93665 bytes 22857652 (22.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 127826 bytes 24810095 (24.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 127826 bytes 24810095 (24.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 69194 bytes 16410778 (16.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 93745 bytes 22872161 (22.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 127937 bytes 24827197 (24.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 127937 bytes 24827197 (24.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 69256 bytes 16425880 (16.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 93829 bytes 22886918 (22.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 128052 bytes 24844531 (24.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 128052 bytes 24844531 (24.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 69320 bytes 16441702 (16.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 93915 bytes 22902005 (22.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 128178 bytes 24863641 (24.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 128178 bytes 24863641 (24.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 69420 bytes 16465060 (16.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 94043 bytes 22925684 (22.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 128317 bytes 24882548 (24.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 128317 bytes 24882548 (24.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 69489 bytes 16481178 (16.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 94135 bytes 22941115 (22.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 128451 bytes 24902231 (24.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 128451 bytes 24902231 (24.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 69544 bytes 16495899 (16.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 94215 bytes 22955655 (22.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 128572 bytes 24919915 (24.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 128572 bytes 24919915 (24.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 69599 bytes 16510294 (16.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 94292 bytes 22970026 (22.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 128681 bytes 24936841 (24.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 128681 bytes 24936841 (24.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 69665 bytes 16526244 (16.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 94380 bytes 22985221 (22.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 128815 bytes 24956403 (24.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 128815 bytes 24956403 (24.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 69771 bytes 16549800 (16.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 94508 bytes 23010090 (23.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 128966 bytes 24976032 (24.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 128966 bytes 24976032 (24.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 69843 bytes 16566361 (16.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 94598 bytes 23025351 (23.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 129108 bytes 24996189 (24.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 129108 bytes 24996189 (24.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 69905 bytes 16581384 (16.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 94677 bytes 23039794 (23.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 129233 bytes 25014043 (25.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 129233 bytes 25014043 (25.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 69963 bytes 16596230 (16.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 94756 bytes 23054261 (23.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 129346 bytes 25031213 (25.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 129346 bytes 25031213 (25.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 70025 bytes 16612011 (16.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 94843 bytes 23069384 (23.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 129469 bytes 25050153 (25.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 129469 bytes 25050153 (25.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 70124 bytes 16635305 (16.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 94967 bytes 23092755 (23.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 129609 bytes 25069172 (25.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 129609 bytes 25069172 (25.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 70201 bytes 16652005 (16.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 95059 bytes 23108336 (23.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 129747 bytes 25089120 (25.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 129747 bytes 25089120 (25.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 70264 bytes 16666992 (16.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 95139 bytes 23122826 (23.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 129864 bytes 25106534 (25.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 129864 bytes 25106534 (25.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 70320 bytes 16681667 (16.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 95217 bytes 23137159 (23.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 129978 bytes 25123816 (25.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 129978 bytes 25123816 (25.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 70379 bytes 16697228 (16.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 95301 bytes 23152105 (23.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 130094 bytes 25142382 (25.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 130094 bytes 25142382 (25.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 70478 bytes 16720473 (16.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 95425 bytes 23175422 (23.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 130235 bytes 25161429 (25.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 130235 bytes 25161429 (25.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 70555 bytes 16741679 (16.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 95527 bytes 23192327 (23.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 130373 bytes 25181460 (25.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 130373 bytes 25181460 (25.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 70610 bytes 16756656 (16.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 95607 bytes 23206804 (23.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 130484 bytes 25198564 (25.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 130484 bytes 25198564 (25.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 70664 bytes 16771194 (16.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 95684 bytes 23221078 (23.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 130600 bytes 25215928 (25.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 130600 bytes 25215928 (25.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 70726 bytes 16787023 (16.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 95768 bytes 23235995 (23.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 130722 bytes 25234904 (25.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 130722 bytes 25234904 (25.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 70806 bytes 16806156 (16.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 95869 bytes 23254915 (23.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 130850 bytes 25252953 (25.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 130850 bytes 25252953 (25.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 70888 bytes 16826286 (16.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 95983 bytes 23274852 (23.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 130995 bytes 25273603 (25.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 130995 bytes 25273603 (25.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 70944 bytes 16841072 (16.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 96062 bytes 23289282 (23.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 131115 bytes 25291197 (25.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 131115 bytes 25291197 (25.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 70989 bytes 16850447 (16.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 96124 bytes 23300228 (23.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 131229 bytes 25308289 (25.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 131229 bytes 25308289 (25.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 71041 bytes 16860953 (16.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 96196 bytes 23312015 (23.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 131348 bytes 25327035 (25.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 131348 bytes 25327035 (25.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 71115 bytes 16875187 (16.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 96291 bytes 23328293 (23.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 131487 bytes 25345832 (25.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 131487 bytes 25345832 (25.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 71191 bytes 16890286 (16.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 96393 bytes 23345036 (23.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 131644 bytes 25367116 (25.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 131644 bytes 25367116 (25.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 71235 bytes 16899513 (16.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 96454 bytes 23355920 (23.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 131754 bytes 25383940 (25.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 131754 bytes 25383940 (25.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 71281 bytes 16908952 (16.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 96520 bytes 23367074 (23.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 131875 bytes 25401562 (25.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 131875 bytes 25401562 (25.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 71336 bytes 16919697 (16.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 96596 bytes 23379128 (23.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 132003 bytes 25420776 (25.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 132003 bytes 25420776 (25.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 71381 bytes 16928960 (16.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 96662 bytes 23390422 (23.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 132120 bytes 25438157 (25.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 132120 bytes 25438157 (25.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 71484 bytes 16948523 (16.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 96790 bytes 23411824 (23.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 132284 bytes 25459651 (25.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 132284 bytes 25459651 (25.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 71530 bytes 16957906 (16.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 96856 bytes 23423038 (23.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 132401 bytes 25477029 (25.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 132401 bytes 25477029 (25.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 71575 bytes 16967281 (16.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 96923 bytes 23434274 (23.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 132515 bytes 25494251 (25.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 132515 bytes 25494251 (25.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 71630 bytes 16977843 (16.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 96998 bytes 23446231 (23.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 132640 bytes 25513169 (25.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 132640 bytes 25513169 (25.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 71680 bytes 16987604 (16.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 97070 bytes 23457871 (23.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 132753 bytes 25530377 (25.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 132753 bytes 25530377 (25.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 71779 bytes 17006741 (17.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 97189 bytes 23478657 (23.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 132907 bytes 25551296 (25.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 132907 bytes 25551296 (25.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 71834 bytes 17016766 (17.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 97257 bytes 23489997 (23.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 133040 bytes 25569667 (25.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 133040 bytes 25569667 (25.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 71880 bytes 17026169 (17.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 97324 bytes 23501281 (23.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 133163 bytes 25587381 (25.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 133163 bytes 25587381 (25.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 71931 bytes 17036487 (17.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 97398 bytes 23513188 (23.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 133285 bytes 25606047 (25.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 133285 bytes 25606047 (25.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 71978 bytes 17046042 (17.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 97463 bytes 23524324 (23.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 133403 bytes 25623537 (25.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 133403 bytes 25623537 (25.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 72081 bytes 17065576 (17.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 97584 bytes 23545303 (23.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 133566 bytes 25644861 (25.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 133566 bytes 25644861 (25.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 72131 bytes 17075227 (17.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 97652 bytes 23556733 (23.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 133692 bytes 25662746 (25.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 133692 bytes 25662746 (25.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 72177 bytes 17084717 (17.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 97722 bytes 23568378 (23.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 133811 bytes 25680252 (25.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 133811 bytes 25680252 (25.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 72228 bytes 17095211 (17.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 97793 bytes 23580159 (23.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 133926 bytes 25698766 (25.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 133926 bytes 25698766 (25.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 72277 bytes 17104869 (17.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 97860 bytes 23591498 (23.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 134046 bytes 25716300 (25.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 134046 bytes 25716300 (25.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 72383 bytes 17124845 (17.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 97990 bytes 23613201 (23.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 134218 bytes 25738567 (25.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 134218 bytes 25738567 (25.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 72438 bytes 17134940 (17.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 98060 bytes 23624739 (23.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 134338 bytes 25756175 (25.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 134338 bytes 25756175 (25.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 72486 bytes 17144435 (17.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 98130 bytes 23636245 (23.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 134455 bytes 25773577 (25.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 134455 bytes 25773577 (25.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 72540 bytes 17155069 (17.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 98208 bytes 23648480 (23.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 134572 bytes 25792019 (25.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 134572 bytes 25792019 (25.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 72589 bytes 17164684 (17.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 98275 bytes 23659748 (23.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 134690 bytes 25809487 (25.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 134690 bytes 25809487 (25.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 72693 bytes 17184555 (17.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 98400 bytes 23681052 (23.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 134858 bytes 25831264 (25.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 134858 bytes 25831264 (25.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 72742 bytes 17194245 (17.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 98470 bytes 23692657 (23.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 134990 bytes 25849547 (25.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 134990 bytes 25849547 (25.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 72787 bytes 17203652 (17.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 98537 bytes 23703957 (23.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 135110 bytes 25867081 (25.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 135110 bytes 25867081 (25.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 72840 bytes 17214254 (17.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 98612 bytes 23715946 (23.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 135233 bytes 25885819 (25.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 135233 bytes 25885819 (25.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 72884 bytes 17223621 (17.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 98677 bytes 23727114 (23.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 135341 bytes 25902753 (25.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 135341 bytes 25902753 (25.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 72984 bytes 17243055 (17.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 98801 bytes 23748415 (23.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 135490 bytes 25923384 (25.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 135490 bytes 25923384 (25.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 73037 bytes 17252870 (17.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 98876 bytes 23760259 (23.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 135614 bytes 25941201 (25.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 135614 bytes 25941201 (25.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 73084 bytes 17262349 (17.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 98944 bytes 23771633 (23.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 135728 bytes 25958447 (25.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 135728 bytes 25958447 (25.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 73143 bytes 17273381 (17.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 99022 bytes 23783850 (23.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 135846 bytes 25976977 (25.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 135846 bytes 25976977 (25.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 73197 bytes 17283471 (17.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 99091 bytes 23795361 (23.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 135956 bytes 25993935 (25.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 135956 bytes 25993935 (25.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 73281 bytes 17299016 (17.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 99196 bytes 23812512 (23.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 136108 bytes 26014632 (26.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 136108 bytes 26014632 (26.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 73347 bytes 17312695 (17.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 99290 bytes 23828521 (23.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 136240 bytes 26033198 (26.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 136240 bytes 26033198 (26.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 73397 bytes 17322374 (17.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 99357 bytes 23839853 (23.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 136352 bytes 26050324 (26.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 136352 bytes 26050324 (26.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 73453 bytes 17333084 (17.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 99433 bytes 23851944 (23.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 136466 bytes 26068456 (26.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 136466 bytes 26068456 (26.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 73505 bytes 17343033 (17.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 99507 bytes 23863776 (23.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 136583 bytes 26085894 (26.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 136583 bytes 26085894 (26.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 73588 bytes 17358361 (17.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 99610 bytes 23880750 (23.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 136725 bytes 26106073 (26.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 136725 bytes 26106073 (26.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 73653 bytes 17371922 (17.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 99702 bytes 23896645 (23.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 136862 bytes 26124854 (26.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 136862 bytes 26124854 (26.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 73698 bytes 17381265 (17.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 99764 bytes 23907663 (23.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 136963 bytes 26141246 (26.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 136963 bytes 26141246 (26.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 73750 bytes 17391683 (17.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 99837 bytes 23919468 (23.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 137082 bytes 26159852 (26.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 137082 bytes 26159852 (26.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 73791 bytes 17400945 (17.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 99901 bytes 23930645 (23.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 137193 bytes 26176918 (26.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 137193 bytes 26176918 (26.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 73856 bytes 17412309 (17.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 99984 bytes 23943404 (23.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 137322 bytes 26196259 (26.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 137322 bytes 26196259 (26.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 73947 bytes 17430482 (17.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 100098 bytes 23963594 (23.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 137469 bytes 26215652 (26.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 137469 bytes 26215652 (26.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 73997 bytes 17440168 (17.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 100166 bytes 23974975 (23.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 137586 bytes 26233030 (26.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 137586 bytes 26233030 (26.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 74054 bytes 17450882 (17.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 100243 bytes 23987100 (23.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 137711 bytes 26251912 (26.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 137711 bytes 26251912 (26.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 74106 bytes 17460749 (17.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 100317 bytes 23998914 (23.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 137831 bytes 26269544 (26.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 137831 bytes 26269544 (26.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 74163 bytes 17471549 (17.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 100397 bytes 24011283 (24.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 137963 bytes 26289090 (26.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 137963 bytes 26289090 (26.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 74261 bytes 17490149 (17.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 100515 bytes 24033060 (24.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 138108 bytes 26308369 (26.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 138108 bytes 26308369 (26.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 74318 bytes 17500319 (17.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 100585 bytes 24044593 (24.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 138230 bytes 26326106 (26.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 138230 bytes 26326106 (26.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 74379 bytes 17511304 (17.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 100662 bytes 24056733 (24.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 138354 bytes 26344912 (26.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 138354 bytes 26344912 (26.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 74428 bytes 17520942 (17.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 100730 bytes 24068130 (24.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 138458 bytes 26361578 (26.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 138458 bytes 26361578 (26.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 74489 bytes 17532149 (17.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 100810 bytes 24080506 (24.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 138585 bytes 26380706 (26.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 138585 bytes 26380706 (26.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 74578 bytes 17550255 (17.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 100925 bytes 24100967 (24.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 138725 bytes 26399724 (26.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 138725 bytes 26399724 (26.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 74630 bytes 17560050 (17.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 100997 bytes 24112685 (24.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 138853 bytes 26417773 (26.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 138853 bytes 26417773 (26.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 74683 bytes 17570492 (17.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 101069 bytes 24124476 (24.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 138967 bytes 26436059 (26.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 138967 bytes 26436059 (26.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 74730 bytes 17579926 (17.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 101134 bytes 24135739 (24.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 139077 bytes 26453099 (26.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 139077 bytes 26453099 (26.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 74784 bytes 17590660 (17.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 101210 bytes 24147850 (24.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 139207 bytes 26472477 (26.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 139207 bytes 26472477 (26.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 74874 bytes 17608739 (17.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 101324 bytes 24168250 (24.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 139348 bytes 26491584 (26.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 139348 bytes 26491584 (26.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 74929 bytes 17618753 (17.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 101394 bytes 24179715 (24.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 139468 bytes 26509105 (26.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 139468 bytes 26509105 (26.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 74987 bytes 17629563 (17.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 101469 bytes 24191796 (24.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 139590 bytes 26527867 (26.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 139590 bytes 26527867 (26.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 75041 bytes 17639501 (17.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 101545 bytes 24203749 (24.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 139708 bytes 26545321 (26.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 139708 bytes 26545321 (26.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 75102 bytes 17650633 (17.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 101623 bytes 24216070 (24.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 139835 bytes 26564521 (26.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 139835 bytes 26564521 (26.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 75198 bytes 17669218 (17.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 101744 bytes 24237026 (24.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 139978 bytes 26583710 (26.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 139978 bytes 26583710 (26.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 75249 bytes 17678973 (17.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 101813 bytes 24248454 (24.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 140106 bytes 26601723 (26.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 140106 bytes 26601723 (26.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 75304 bytes 17689702 (17.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 101890 bytes 24260630 (24.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 140228 bytes 26620663 (26.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 140228 bytes 26620663 (26.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 75354 bytes 17699389 (17.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 101962 bytes 24272316 (24.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 140344 bytes 26638025 (26.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 140344 bytes 26638025 (26.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 75412 bytes 17710326 (17.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 102039 bytes 24284488 (24.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 140468 bytes 26657173 (26.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 140468 bytes 26657173 (26.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 75508 bytes 17728679 (17.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 102152 bytes 24304712 (24.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 140606 bytes 26675933 (26.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 140606 bytes 26675933 (26.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 75562 bytes 17738629 (17.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 102229 bytes 24316835 (24.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 140732 bytes 26694007 (26.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 140732 bytes 26694007 (26.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 75617 bytes 17749271 (17.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 102304 bytes 24328796 (24.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 140854 bytes 26712909 (26.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 140854 bytes 26712909 (26.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 75662 bytes 17758610 (17.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 102367 bytes 24339752 (24.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 140965 bytes 26729975 (26.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 140965 bytes 26729975 (26.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 75718 bytes 17769529 (17.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 102441 bytes 24351664 (24.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 141091 bytes 26749109 (26.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 141091 bytes 26749109 (26.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 75785 bytes 17783326 (17.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 102532 bytes 24367609 (24.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 141223 bytes 26767498 (26.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 141223 bytes 26767498 (26.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 75815 bytes 17788313 (17.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 102587 bytes 24374856 (24.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 141266 bytes 26770474 (26.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 141266 bytes 26770474 (26.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 75836 bytes 17790542 (17.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 102615 bytes 24377030 (24.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 141294 bytes 26773526 (26.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 141294 bytes 26773526 (26.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 75849 bytes 17791393 (17.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 102635 bytes 24378500 (24.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 141304 bytes 26774188 (26.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 141304 bytes 26774188 (26.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 75870 bytes 17793640 (17.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 102666 bytes 24380930 (24.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 141342 bytes 26777982 (26.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 141342 bytes 26777982 (26.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 75909 bytes 17799327 (17.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 102711 bytes 24387125 (24.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 141380 bytes 26780567 (26.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 141380 bytes 26780567 (26.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 75937 bytes 17804100 (17.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 102760 bytes 24393882 (24.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 141416 bytes 26782979 (26.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 141416 bytes 26782979 (26.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 75952 bytes 17805858 (17.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 102784 bytes 24395781 (24.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 141442 bytes 26785867 (26.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 141442 bytes 26785867 (26.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 75962 bytes 17806636 (17.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 102803 bytes 24397252 (24.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 141462 bytes 26787289 (26.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 141462 bytes 26787289 (26.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 75983 bytes 17808904 (17.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 102833 bytes 24399585 (24.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 141496 bytes 26790829 (26.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 141496 bytes 26790829 (26.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 76019 bytes 17814250 (17.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 102876 bytes 24405651 (24.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 141534 bytes 26793375 (26.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 141534 bytes 26793375 (26.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 76070 bytes 17824045 (17.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 102949 bytes 24417310 (24.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 141613 bytes 26803744 (26.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 141613 bytes 26803744 (26.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 76124 bytes 17834667 (17.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 103026 bytes 24429423 (24.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 141743 bytes 26823076 (26.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 141743 bytes 26823076 (26.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 76175 bytes 17844413 (17.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 103099 bytes 24442242 (24.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 141855 bytes 26840230 (26.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 141855 bytes 26840230 (26.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 76231 bytes 17855183 (17.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 103177 bytes 24454397 (24.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 141982 bytes 26859534 (26.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 141982 bytes 26859534 (26.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 76280 bytes 17864782 (17.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 103249 bytes 24466155 (24.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 142103 bytes 26877195 (26.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 142103 bytes 26877195 (26.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 76375 bytes 17883495 (17.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 103362 bytes 24486971 (24.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 142241 bytes 26896073 (26.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 142241 bytes 26896073 (26.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 76431 bytes 17894165 (17.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 103439 bytes 24499084 (24.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 142372 bytes 26915482 (26.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 142372 bytes 26915482 (26.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 76477 bytes 17903548 (17.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 103504 bytes 24510216 (24.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 142484 bytes 26932660 (26.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 142484 bytes 26932660 (26.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 76534 bytes 17914507 (17.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 103579 bytes 24522158 (24.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 142615 bytes 26952148 (26.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 142615 bytes 26952148 (26.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 76584 bytes 17924269 (17.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 103646 bytes 24533545 (24.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 142730 bytes 26969544 (26.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 142730 bytes 26969544 (26.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 76676 bytes 17942519 (17.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 103759 bytes 24553918 (24.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 142870 bytes 26988541 (26.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 142870 bytes 26988541 (26.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 76730 bytes 17953097 (17.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 103831 bytes 24565725 (24.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 142999 bytes 27007821 (27.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 142999 bytes 27007821 (27.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 76777 bytes 17962628 (17.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 103898 bytes 24577073 (24.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 143110 bytes 27024947 (27.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 143110 bytes 27024947 (27.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 76834 bytes 17973481 (17.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 103973 bytes 24589129 (24.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 143232 bytes 27044025 (27.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 143232 bytes 27044025 (27.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 76879 bytes 17982912 (17.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 104038 bytes 24600313 (24.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 143337 bytes 27060815 (27.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 143337 bytes 27060815 (27.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 76971 bytes 18001187 (18.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 104151 bytes 24620579 (24.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 143481 bytes 27080042 (27.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 143481 bytes 27080042 (27.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 77023 bytes 18011744 (18.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 104226 bytes 24632583 (24.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 143610 bytes 27099323 (27.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 143610 bytes 27099323 (27.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 77067 bytes 18021067 (18.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 104291 bytes 24643715 (24.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 143728 bytes 27116777 (27.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 143728 bytes 27116777 (27.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 77123 bytes 18032078 (18.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 104369 bytes 24655963 (24.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 143859 bytes 27136359 (27.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 143859 bytes 27136359 (27.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 77168 bytes 18041500 (18.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 104435 bytes 24667252 (24.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 143968 bytes 27153345 (27.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 143968 bytes 27153345 (27.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 77260 bytes 18059761 (18.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 104549 bytes 24687666 (24.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 144105 bytes 27172209 (27.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 144105 bytes 27172209 (27.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 77319 bytes 18070655 (18.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 104622 bytes 24699527 (24.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 144232 bytes 27191422 (27.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 144232 bytes 27191422 (27.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 77363 bytes 18079966 (18.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 104688 bytes 24710765 (24.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 144349 bytes 27208860 (27.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 144349 bytes 27208860 (27.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 77420 bytes 18090840 (18.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 104767 bytes 24723090 (24.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 144487 bytes 27228900 (27.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 144487 bytes 27228900 (27.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 77475 bytes 18100990 (18.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 104836 bytes 24734593 (24.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 144600 bytes 27246132 (27.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 144600 bytes 27246132 (27.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 77570 bytes 18119409 (18.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 104950 bytes 24754925 (24.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 144744 bytes 27265219 (27.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 144744 bytes 27265219 (27.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 77632 bytes 18130617 (18.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 105031 bytes 24767364 (24.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 144883 bytes 27285235 (27.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 144883 bytes 27285235 (27.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 77683 bytes 18140344 (18.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 105097 bytes 24778626 (24.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 144998 bytes 27302509 (27.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 144998 bytes 27302509 (27.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 77741 bytes 18151399 (18.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 105176 bytes 24790964 (24.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 145120 bytes 27321565 (27.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 145120 bytes 27321565 (27.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 77789 bytes 18161034 (18.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 105242 bytes 24802202 (24.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 145226 bytes 27338277 (27.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 145226 bytes 27338277 (27.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 77861 bytes 18175051 (18.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 105333 bytes 24818151 (24.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 145354 bytes 27356458 (27.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 145354 bytes 27356458 (27.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 77938 bytes 18190050 (18.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 105439 bytes 24835018 (24.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 145509 bytes 27377469 (27.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 145509 bytes 27377469 (27.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 77988 bytes 18199789 (18.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 105505 bytes 24846292 (24.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 145616 bytes 27394233 (27.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 145616 bytes 27394233 (27.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 78052 bytes 18211237 (18.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 105588 bytes 24858799 (24.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 145746 bytes 27413763 (27.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 145746 bytes 27413763 (27.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 78101 bytes 18220812 (18.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 105656 bytes 24870157 (24.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 145867 bytes 27431337 (27.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 145867 bytes 27431337 (27.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 78178 bytes 18235233 (18.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 105751 bytes 24886390 (24.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 146004 bytes 27450044 (27.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 146004 bytes 27450044 (27.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 78255 bytes 18250212 (18.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 105847 bytes 24902655 (24.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 146136 bytes 27469711 (27.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 146136 bytes 27469711 (27.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 78301 bytes 18259711 (18.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 105916 bytes 24914155 (24.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 146251 bytes 27487009 (27.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 146251 bytes 27487009 (27.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 78360 bytes 18270927 (18.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 105998 bytes 24926716 (24.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 146382 bytes 27506673 (27.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 146382 bytes 27506673 (27.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 78410 bytes 18280833 (18.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 106068 bytes 24938269 (24.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 146499 bytes 27524075 (27.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 146499 bytes 27524075 (27.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 78486 bytes 18295204 (18.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 106161 bytes 24954313 (24.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 146622 bytes 27541990 (27.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 146622 bytes 27541990 (27.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 78564 bytes 18310446 (18.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 106260 bytes 24970789 (24.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 146755 bytes 27561646 (27.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 146755 bytes 27561646 (27.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 78612 bytes 18320125 (18.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 106329 bytes 24982249 (24.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 146879 bytes 27579487 (27.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 146879 bytes 27579487 (27.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 78670 bytes 18331142 (18.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 106406 bytes 24994325 (24.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 147010 bytes 27598999 (27.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 147010 bytes 27598999 (27.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 78716 bytes 18340561 (18.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 106473 bytes 25005665 (25.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 147119 bytes 27615961 (27.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 147119 bytes 27615961 (27.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 78768 bytes 18350642 (18.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 106545 bytes 25017530 (25.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 147234 bytes 27633334 (27.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 147234 bytes 27633334 (27.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 78869 bytes 18370100 (18.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 106664 bytes 25038249 (25.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 147382 bytes 27653992 (27.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 147382 bytes 27653992 (27.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 78926 bytes 18380194 (18.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 106738 bytes 25050062 (25.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 147498 bytes 27671393 (27.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 147498 bytes 27671393 (27.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 78997 bytes 18391978 (18.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 106825 bytes 25062869 (25.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 147628 bytes 27690947 (27.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 147628 bytes 27690947 (27.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 79047 bytes 18401693 (18.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 106891 bytes 25074123 (25.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 147741 bytes 27708101 (27.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 147741 bytes 27708101 (27.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 79098 bytes 18411535 (18.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 106961 bytes 25085798 (25.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 147856 bytes 27725437 (27.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 147856 bytes 27725437 (27.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 79208 bytes 18431670 (18.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 107089 bytes 25107388 (25.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 148009 bytes 27746395 (27.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 148009 bytes 27746395 (27.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 79254 bytes 18441097 (18.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 107156 bytes 25118704 (25.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 148127 bytes 27763888 (27.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 148127 bytes 27763888 (27.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 79318 bytes 18452574 (18.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 107240 bytes 25131323 (25.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 148257 bytes 27783442 (27.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 148257 bytes 27783442 (27.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 79372 bytes 18462688 (18.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 107309 bytes 25142802 (25.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 148371 bytes 27800688 (27.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 148371 bytes 27800688 (27.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 79419 bytes 18472333 (18.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 107378 bytes 25154296 (25.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 148484 bytes 27817944 (27.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 148484 bytes 27817944 (27.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 79519 bytes 18491751 (18.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 107498 bytes 25175189 (25.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 148637 bytes 27838879 (27.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 148637 bytes 27838879 (27.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 79565 bytes 18501134 (18.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 107566 bytes 25186499 (25.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 148762 bytes 27856711 (27.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 148762 bytes 27856711 (27.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 79628 bytes 18512564 (18.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 107650 bytes 25199138 (25.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 148887 bytes 27875911 (27.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 148887 bytes 27875911 (27.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 79676 bytes 18522199 (18.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 107718 bytes 25210524 (25.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 149005 bytes 27893401 (27.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 149005 bytes 27893401 (27.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 79722 bytes 18531662 (18.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 107784 bytes 25221782 (25.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 149119 bytes 27910647 (27.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 149119 bytes 27910647 (27.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 79827 bytes 18553412 (18.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 107907 bytes 25242973 (25.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 149279 bytes 27932065 (27.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 149279 bytes 27932065 (27.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 79880 bytes 18563231 (18.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 107980 bytes 25254725 (25.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 149398 bytes 27949586 (27.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 149398 bytes 27949586 (27.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 79939 bytes 18574666 (18.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 108059 bytes 25267001 (25.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 149527 bytes 27969088 (27.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 149527 bytes 27969088 (27.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 79991 bytes 18584624 (18.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 108130 bytes 25278641 (25.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 149635 bytes 27985998 (27.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 149635 bytes 27985998 (27.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 80042 bytes 18594407 (18.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 108196 bytes 25289887 (25.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 149747 bytes 28003116 (28.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 149747 bytes 28003116 (28.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 80140 bytes 18613875 (18.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 108318 bytes 25310938 (25.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 149898 bytes 28023854 (28.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 149898 bytes 28023854 (28.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 80189 bytes 18623405 (18.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 108388 bytes 25322467 (25.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 150023 bytes 28041877 (28.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 150023 bytes 28041877 (28.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 80250 bytes 18634841 (18.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 108469 bytes 25334934 (25.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 150158 bytes 28061737 (28.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 150158 bytes 28061737 (28.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 80299 bytes 18644528 (18.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 108533 bytes 25346080 (25.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 150272 bytes 28078995 (28.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 150272 bytes 28078995 (28.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 80359 bytes 18655101 (18.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 108605 bytes 25357890 (25.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 150380 bytes 28095775 (28.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 150380 bytes 28095775 (28.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 80438 bytes 18670274 (18.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 108704 bytes 25374635 (25.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 150523 bytes 28116073 (28.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 150523 bytes 28116073 (28.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 80510 bytes 18684305 (18.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 108799 bytes 25390718 (25.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 150661 bytes 28134913 (28.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 150661 bytes 28134913 (28.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 80569 bytes 18695251 (18.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 108875 bytes 25402741 (25.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 150782 bytes 28153727 (28.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 150782 bytes 28153727 (28.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 80619 bytes 18705005 (18.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 108941 bytes 25413966 (25.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 150898 bytes 28171089 (28.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 150898 bytes 28171089 (28.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 80674 bytes 18715095 (18.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 109012 bytes 25425545 (25.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 151013 bytes 28188423 (28.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 151013 bytes 28188423 (28.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 80756 bytes 18730471 (18.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 109117 bytes 25442681 (25.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 151161 bytes 28208950 (28.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 151161 bytes 28208950 (28.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 80826 bytes 18744363 (18.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 109207 bytes 25458427 (25.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 151288 bytes 28227056 (28.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 151288 bytes 28227056 (28.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 80886 bytes 18755721 (18.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 109285 bytes 25470805 (25.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 151415 bytes 28246396 (28.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 151415 bytes 28246396 (28.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 80937 bytes 18765818 (18.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 109354 bytes 25482281 (25.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 151523 bytes 28263306 (28.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 151523 bytes 28263306 (28.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 80987 bytes 18775652 (18.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 109424 bytes 25493870 (25.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 151636 bytes 28280500 (28.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 151636 bytes 28280500 (28.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 81065 bytes 18790738 (18.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 109522 bytes 25510424 (25.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 151772 bytes 28300357 (28.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 151772 bytes 28300357 (28.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 81133 bytes 18804485 (18.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 109612 bytes 25526097 (25.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 151904 bytes 28318809 (28.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 151904 bytes 28318809 (28.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 81194 bytes 18815738 (18.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 109693 bytes 25538493 (25.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 152045 bytes 28338996 (28.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 152045 bytes 28338996 (28.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 81247 bytes 18825665 (18.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 109763 bytes 25549979 (25.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 152161 bytes 28356382 (28.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 152161 bytes 28356382 (28.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 81294 bytes 18835124 (18.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 109833 bytes 25561545 (25.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 152274 bytes 28373552 (28.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 152274 bytes 28373552 (28.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 81349 bytes 18846072 (18.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 109908 bytes 25573721 (25.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 152400 bytes 28392739 (28.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 152400 bytes 28392739 (28.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 81450 bytes 18865004 (18.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 110024 bytes 25594059 (25.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 152539 bytes 28411729 (28.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 152539 bytes 28411729 (28.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 81515 bytes 18876406 (18.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 110106 bytes 25606546 (25.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 152673 bytes 28431470 (28.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 152673 bytes 28431470 (28.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 81564 bytes 18886097 (18.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 110172 bytes 25617784 (25.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 152792 bytes 28448976 (28.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 152792 bytes 28448976 (28.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 81613 bytes 18895775 (18.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 110239 bytes 25629115 (25.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 152905 bytes 28466244 (28.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 152905 bytes 28466244 (28.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 81672 bytes 18906896 (18.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 110316 bytes 25641167 (25.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 153039 bytes 28485828 (28.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 153039 bytes 28485828 (28.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 81761 bytes 18924934 (18.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 110427 bytes 25661248 (25.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 153179 bytes 28504787 (28.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 153179 bytes 28504787 (28.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 81826 bytes 18936409 (18.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 110511 bytes 25673836 (25.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 153321 bytes 28524945 (28.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 153321 bytes 28524945 (28.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 81877 bytes 18946394 (18.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 110580 bytes 25685291 (25.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 153435 bytes 28542167 (28.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 153435 bytes 28542167 (28.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 81925 bytes 18956060 (18.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 110649 bytes 25696795 (25.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 153546 bytes 28559257 (28.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 153546 bytes 28559257 (28.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 81973 bytes 18966334 (18.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 110720 bytes 25708500 (25.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 153672 bytes 28578379 (28.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 153672 bytes 28578379 (28.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 82062 bytes 18984313 (18.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 110832 bytes 25728772 (25.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 153812 bytes 28597400 (28.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 153812 bytes 28597400 (28.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 82116 bytes 18995098 (18.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 110907 bytes 25740832 (25.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 153951 bytes 28617448 (28.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 153951 bytes 28617448 (28.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 82164 bytes 19004697 (19.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 110971 bytes 25751902 (25.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 154067 bytes 28634834 (28.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 154067 bytes 28634834 (28.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 82214 bytes 19014376 (19.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 111035 bytes 25763004 (25.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 154182 bytes 28652132 (28.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 154182 bytes 28652132 (28.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 82274 bytes 19025573 (19.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 111112 bytes 25775283 (25.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 154302 bytes 28670930 (28.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 154302 bytes 28670930 (28.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 82374 bytes 19044461 (19.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 111230 bytes 25796000 (25.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 154448 bytes 28690385 (28.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 154448 bytes 28690385 (28.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 82430 bytes 19055328 (19.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 111308 bytes 25808216 (25.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 154578 bytes 28709918 (28.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 154578 bytes 28709918 (28.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 82479 bytes 19065063 (19.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 111377 bytes 25819644 (25.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 154700 bytes 28727592 (28.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 154700 bytes 28727592 (28.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 82526 bytes 19074518 (19.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 111441 bytes 25830790 (25.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 154818 bytes 28745084 (28.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 154818 bytes 28745084 (28.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 82591 bytes 19085986 (19.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 111518 bytes 25842929 (25.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 154946 bytes 28764300 (28.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 154946 bytes 28764300 (28.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn (self._dns_host, self.port), self.timeout, **extra_kw File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection raise err File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection sock.connect(sa) OSError: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen chunked=chunked, File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 382, in _make_request self._validate_conn(conn) File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn conn.connect() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 353, in connect conn = self._new_conn() File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn self, "Failed to establish a new connection: %s" % e urllib3.exceptions.NewConnectionError: : Failed to establish a new connection: [Errno 113] No route to host During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send timeout=timeout File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2] File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment raise MaxRetryError(_pool, url, error or ResponseError(cause)) urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip, ram_cpu, uptime_day, verbose) File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB r = requests.post(requete, data=data) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post return request('post', url, data=data, json=json, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request return session.request(method=method, url=url, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request resp = self.send(prep, **send_kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send r = adapter.send(request, **kwargs) File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send raise ConnectionError(e, request=request) requests.exceptions.ConnectionError: HTTPSConnectionPool(host='www.fotonower.com', port=443): Max retries exceeded with url: /api/v1/raspi/add (Caused by NewConnectionError(': Failed to establish a new connection: [Errno 113] No route to host',)) erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 82691 bytes 19104665 (19.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 111635 bytes 25863495 (25.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 155085 bytes 28783207 (28.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 155085 bytes 28783207 (28.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 82767 bytes 19122318 (19.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 111736 bytes 25879803 (25.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 155241 bytes 28804306 (28.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 155241 bytes 28804306 (28.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 82826 bytes 19137516 (19.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 111813 bytes 25894114 (25.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 155363 bytes 28821968 (28.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 155363 bytes 28821968 (28.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 82886 bytes 19152849 (19.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 111885 bytes 25908106 (25.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 155477 bytes 28839072 (28.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 155477 bytes 28839072 (28.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 82955 bytes 19169437 (19.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 111974 bytes 25923409 (25.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 155604 bytes 28858270 (28.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 155604 bytes 28858270 (28.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 83046 bytes 19190752 (19.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 112086 bytes 25943202 (25.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 155740 bytes 28876891 (28.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 155740 bytes 28876891 (28.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 83150 bytes 19218736 (19.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 112217 bytes 25965453 (25.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 155909 bytes 28898842 (28.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 155909 bytes 28898842 (28.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 83212 bytes 19234118 (19.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 112293 bytes 25979762 (25.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 156022 bytes 28915858 (28.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 156022 bytes 28915858 (28.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 83276 bytes 19249576 (19.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 112373 bytes 25994283 (25.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 156143 bytes 28933504 (28.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 156143 bytes 28933504 (28.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 83340 bytes 19265721 (19.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 112455 bytes 26009029 (26.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 156267 bytes 28952510 (28.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 156267 bytes 28952510 (28.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 83427 bytes 19285523 (19.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 112557 bytes 26028013 (26.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 156399 bytes 28970882 (28.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 156399 bytes 28970882 (28.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 83519 bytes 19306727 (19.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 112671 bytes 26047929 (26.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 156550 bytes 28991837 (28.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 156550 bytes 28991837 (28.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 83581 bytes 19322120 (19.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 112748 bytes 26062344 (26.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 156662 bytes 29009015 (29.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 156662 bytes 29009015 (29.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 83638 bytes 19337277 (19.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 112829 bytes 26076987 (26.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 156776 bytes 29026273 (29.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 156776 bytes 29026273 (29.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 83716 bytes 19359273 (19.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 112930 bytes 26093691 (26.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 156909 bytes 29045879 (29.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 156909 bytes 29045879 (29.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 83803 bytes 19379200 (19.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 113037 bytes 26113251 (26.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 157041 bytes 29064276 (29.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 157041 bytes 29064276 (29.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 83895 bytes 19400140 (19.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 113147 bytes 26132791 (26.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 157182 bytes 29084490 (29.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 157182 bytes 29084490 (29.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 83954 bytes 19415389 (19.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 113227 bytes 26147312 (26.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 157305 bytes 29102219 (29.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 157305 bytes 29102219 (29.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 84011 bytes 19430439 (19.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 113306 bytes 26161776 (26.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 157418 bytes 29119413 (29.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 157418 bytes 29119413 (29.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 84085 bytes 19447511 (19.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 113398 bytes 26177515 (26.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 157546 bytes 29138725 (29.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 157546 bytes 29138725 (29.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 84144 bytes 19462876 (19.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 113478 bytes 26192141 (26.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 157667 bytes 29156373 (29.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 157667 bytes 29156373 (29.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 84268 bytes 19493790 (19.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 113623 bytes 26217601 (26.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 157827 bytes 29177797 (29.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 157827 bytes 29177797 (29.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 84329 bytes 19509016 (19.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 113700 bytes 26231997 (26.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 157953 bytes 29195718 (29.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 157953 bytes 29195718 (29.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 84388 bytes 19524265 (19.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 113777 bytes 26246408 (26.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 158074 bytes 29213328 (29.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 158074 bytes 29213328 (29.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 84455 bytes 19540745 (19.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 113859 bytes 26261134 (26.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 158203 bytes 29232518 (29.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 158203 bytes 29232518 (29.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 84516 bytes 19556130 (19.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 113941 bytes 26275847 (26.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 158320 bytes 29249956 (29.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 158320 bytes 29249956 (29.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 84629 bytes 19581431 (19.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 114076 bytes 26300094 (26.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 158483 bytes 29271636 (29.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 158483 bytes 29271636 (29.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 84692 bytes 19596865 (19.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 114153 bytes 26314473 (26.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 158612 bytes 29289676 (29.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 158612 bytes 29289676 (29.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 84750 bytes 19611999 (19.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 114232 bytes 26328977 (26.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 158731 bytes 29307218 (29.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 158731 bytes 29307218 (29.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 84832 bytes 19634247 (19.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 114332 bytes 26346739 (26.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 158867 bytes 29326944 (29.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 158867 bytes 29326944 (29.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 84890 bytes 19649365 (19.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 114407 bytes 26360939 (26.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 158986 bytes 29344426 (29.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 158986 bytes 29344426 (29.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 85008 bytes 19675022 (19.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 114547 bytes 26385580 (26.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 159148 bytes 29366028 (29.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 159148 bytes 29366028 (29.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 85072 bytes 19690555 (19.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 114628 bytes 26400219 (26.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 159281 bytes 29384300 (29.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 159281 bytes 29384300 (29.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 85130 bytes 19705776 (19.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 114707 bytes 26414748 (26.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 159396 bytes 29401610 (29.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 159396 bytes 29401610 (29.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 85198 bytes 19722391 (19.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 114797 bytes 26430109 (26.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 159526 bytes 29421026 (29.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 159526 bytes 29421026 (29.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 85250 bytes 19737093 (19.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 114872 bytes 26444273 (26.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 159646 bytes 29438524 (29.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 159646 bytes 29438524 (29.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 85372 bytes 19767962 (19.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 115023 bytes 26470379 (26.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 159813 bytes 29460350 (29.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 159813 bytes 29460350 (29.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 85433 bytes 19783300 (19.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 115102 bytes 26484906 (26.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 159940 bytes 29478346 (29.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 159940 bytes 29478346 (29.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 85492 bytes 19798724 (19.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 115180 bytes 26499675 (26.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 160060 bytes 29495880 (29.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 160060 bytes 29495880 (29.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 85557 bytes 19814796 (19.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 115267 bytes 26514820 (26.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 160186 bytes 29514990 (29.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 160186 bytes 29514990 (29.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 85614 bytes 19829551 (19.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 115342 bytes 26528975 (26.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 160301 bytes 29532146 (29.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 160301 bytes 29532146 (29.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 85726 bytes 19854295 (19.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 115484 bytes 26553805 (26.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 160462 bytes 29553627 (29.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 160462 bytes 29553627 (29.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 85786 bytes 19869238 (19.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 115567 bytes 26568581 (26.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 160599 bytes 29572298 (29.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 160599 bytes 29572298 (29.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 85840 bytes 19883793 (19.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 115644 bytes 26582889 (26.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 160718 bytes 29589780 (29.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 160718 bytes 29589780 (29.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 85917 bytes 19905233 (19.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 115745 bytes 26599597 (26.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 160849 bytes 29609128 (29.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 160849 bytes 29609128 (29.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 85974 bytes 19920020 (19.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 115823 bytes 26613938 (26.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 160972 bytes 29626842 (29.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 160972 bytes 29626842 (29.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 86068 bytes 19940809 (19.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 115932 bytes 26633545 (26.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 161124 bytes 29647652 (29.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 161124 bytes 29647652 (29.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 86148 bytes 19959869 (19.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 116034 bytes 26652299 (26.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 161260 bytes 29666247 (29.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 161260 bytes 29666247 (29.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 86210 bytes 19975066 (19.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 116116 bytes 26666919 (26.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 161384 bytes 29684049 (29.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 161384 bytes 29684049 (29.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 86273 bytes 19991007 (19.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 116202 bytes 26681973 (26.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 161513 bytes 29703291 (29.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 161513 bytes 29703291 (29.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 86334 bytes 20006113 (20.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 116284 bytes 26696574 (26.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 161633 bytes 29720875 (29.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 161633 bytes 29720875 (29.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 86440 bytes 20032350 (20.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 116409 bytes 26717976 (26.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 161788 bytes 29741932 (29.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 161788 bytes 29741932 (29.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 86527 bytes 20052216 (20.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 116517 bytes 26737242 (26.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 161923 bytes 29760440 (29.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 161923 bytes 29760440 (29.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 86589 bytes 20067215 (20.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 116596 bytes 26751714 (26.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 162048 bytes 29778308 (29.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 162048 bytes 29778308 (29.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 86653 bytes 20083137 (20.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 116684 bytes 26766945 (26.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 162179 bytes 29797690 (29.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 162179 bytes 29797690 (29.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 86708 bytes 20097843 (20.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 116761 bytes 26781232 (26.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 162295 bytes 29815040 (29.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 162295 bytes 29815040 (29.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 86806 bytes 20118851 (20.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 116878 bytes 26801551 (26.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 162444 bytes 29835736 (29.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 162444 bytes 29835736 (29.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 86891 bytes 20138449 (20.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 116981 bytes 26820501 (26.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 162575 bytes 29854110 (29.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 162575 bytes 29854110 (29.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 86955 bytes 20153540 (20.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 117060 bytes 26834937 (26.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 162700 bytes 29871966 (29.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 162700 bytes 29871966 (29.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 87031 bytes 20174689 (20.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 117157 bytes 26851322 (26.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 162832 bytes 29891448 (29.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 162832 bytes 29891448 (29.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 87094 bytes 20190809 (20.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 117240 bytes 26866622 (26.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 162955 bytes 29909212 (29.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 162955 bytes 29909212 (29.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 87168 bytes 20207473 (20.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 117337 bytes 26882625 (26.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 163096 bytes 29929341 (29.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 163096 bytes 29929341 (29.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 87263 bytes 20230008 (20.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 117449 bytes 26903801 (26.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 163216 bytes 29946589 (29.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 163216 bytes 29946589 (29.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 87324 bytes 20245153 (20.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 117531 bytes 26918454 (26.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 163339 bytes 29964318 (29.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 163339 bytes 29964318 (29.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 87388 bytes 20261126 (20.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 117615 bytes 26933360 (26.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 163470 bytes 29983700 (29.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 163470 bytes 29983700 (29.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 87455 bytes 20277581 (20.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 117699 bytes 26948204 (26.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 163598 bytes 30001772 (30.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 163598 bytes 30001772 (30.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 87535 bytes 20299191 (20.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 117805 bytes 26965290 (26.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 163733 bytes 30021514 (30.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 163733 bytes 30021514 (30.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 87636 bytes 20322465 (20.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 117931 bytes 26988848 (26.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 163872 bytes 30040409 (30.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 163872 bytes 30040409 (30.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 87700 bytes 20337684 (20.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 118015 bytes 27003625 (27.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 163998 bytes 30058330 (30.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 163998 bytes 30058330 (30.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 87778 bytes 20354546 (20.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 118106 bytes 27019205 (27.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 164131 bytes 30077804 (30.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 164131 bytes 30077804 (30.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 87832 bytes 20369129 (20.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 118185 bytes 27033655 (27.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 164246 bytes 30095102 (30.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 164246 bytes 30095102 (30.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 87902 bytes 20385412 (20.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 118275 bytes 27049018 (27.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 164384 bytes 30115000 (30.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 164384 bytes 30115000 (30.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 88013 bytes 20409371 (20.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 118403 bytes 27072634 (27.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 164534 bytes 30134577 (30.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 164534 bytes 30134577 (30.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 88073 bytes 20424416 (20.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 118485 bytes 27087282 (27.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 164655 bytes 30152202 (30.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 164655 bytes 30152202 (30.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 88147 bytes 20446580 (20.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 118585 bytes 27103909 (27.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 164791 bytes 30171950 (30.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 164791 bytes 30171950 (30.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 88207 bytes 20461633 (20.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 118664 bytes 27118343 (27.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 164916 bytes 30189818 (30.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 164916 bytes 30189818 (30.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 88276 bytes 20477956 (20.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 118754 bytes 27133634 (27.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 165051 bytes 30209574 (30.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 165051 bytes 30209574 (30.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 88383 bytes 20502249 (20.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 118878 bytes 27157146 (27.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 165194 bytes 30228559 (30.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 165194 bytes 30228559 (30.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 88441 bytes 20517024 (20.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 118961 bytes 27171838 (27.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 165333 bytes 30247309 (30.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 165333 bytes 30247309 (30.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 88504 bytes 20532866 (20.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 119049 bytes 27187075 (27.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 165460 bytes 30266471 (30.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 165460 bytes 30266471 (30.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 88569 bytes 20548195 (20.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 119133 bytes 27201943 (27.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 165589 bytes 30284559 (30.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 165589 bytes 30284559 (30.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 88648 bytes 20569772 (20.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 119230 bytes 27218376 (27.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 165727 bytes 30304339 (30.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 165727 bytes 30304339 (30.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 88752 bytes 20593237 (20.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 119356 bytes 27241882 (27.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 165869 bytes 30323426 (30.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 165869 bytes 30323426 (30.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok b'Error on request' Token e243aac39fb012c084cfefeb2a6a3641 is maybe invalid erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 88821 bytes 20608897 (20.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 119445 bytes 27257040 (27.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 166013 bytes 30342460 (30.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 166013 bytes 30342460 (30.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 88889 bytes 20625203 (20.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 119532 bytes 27273165 (27.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 166139 bytes 30361546 (30.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 166139 bytes 30361546 (30.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 88950 bytes 20640046 (20.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 119611 bytes 27287597 (27.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 166250 bytes 30378422 (30.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 166250 bytes 30378422 (30.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 89023 bytes 20656569 (20.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 119702 bytes 27303075 (27.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 166382 bytes 30398080 (30.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 166382 bytes 30398080 (30.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 89115 bytes 20677384 (20.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 119809 bytes 27323317 (27.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 166517 bytes 30416660 (30.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 166517 bytes 30416660 (30.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 89191 bytes 20696378 (20.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 119910 bytes 27342143 (27.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 166652 bytes 30435253 (30.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 166652 bytes 30435253 (30.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 89264 bytes 20718538 (20.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 120009 bytes 27358719 (27.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 166783 bytes 30454681 (30.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 166783 bytes 30454681 (30.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 89323 bytes 20733473 (20.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 120090 bytes 27373478 (27.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 166901 bytes 30472185 (30.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 166901 bytes 30472185 (30.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 89395 bytes 20750186 (20.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 120186 bytes 27389202 (27.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 167035 bytes 30491877 (30.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 167035 bytes 30491877 (30.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 89476 bytes 20770354 (20.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 120289 bytes 27408199 (27.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 167176 bytes 30510717 (30.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 167176 bytes 30510717 (30.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 89559 bytes 20792005 (20.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 120392 bytes 27427052 (27.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 167309 bytes 30529157 (30.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 167309 bytes 30529157 (30.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 89620 bytes 20807667 (20.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 120477 bytes 27441969 (27.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 167444 bytes 30548748 (30.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 167444 bytes 30548748 (30.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 89675 bytes 20822361 (20.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 120555 bytes 27456297 (27.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 167563 bytes 30566266 (30.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 167563 bytes 30566266 (30.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 89759 bytes 20845563 (20.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 120663 bytes 27473705 (27.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 167710 bytes 30586812 (30.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 167710 bytes 30586812 (30.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 89849 bytes 20866346 (20.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 120771 bytes 27493147 (27.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 167844 bytes 30605324 (30.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 167844 bytes 30605324 (30.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 89929 bytes 20885422 (20.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 120875 bytes 27512008 (27.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 167971 bytes 30623392 (30.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 167971 bytes 30623392 (30.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 89999 bytes 20902781 (20.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 120966 bytes 27527566 (27.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 168110 bytes 30643217 (30.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 168110 bytes 30643217 (30.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 90057 bytes 20917662 (20.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 121049 bytes 27542315 (27.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 168231 bytes 30660803 (30.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 168231 bytes 30660803 (30.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 90128 bytes 20934053 (20.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 121138 bytes 27557544 (27.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 168366 bytes 30680523 (30.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 168366 bytes 30680523 (30.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 90185 bytes 20949151 (20.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 121221 bytes 27572407 (27.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 168492 bytes 30698432 (30.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 168492 bytes 30698432 (30.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 90295 bytes 20973415 (20.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 121358 bytes 27596871 (27.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 168640 bytes 30717832 (30.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 168640 bytes 30717832 (30.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 90370 bytes 20994620 (20.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 121461 bytes 27613727 (27.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 168786 bytes 30738078 (30.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 168786 bytes 30738078 (30.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 90428 bytes 21009335 (21.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 121536 bytes 27628283 (27.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 168906 bytes 30755612 (30.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 168906 bytes 30755612 (30.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 90502 bytes 21025940 (21.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 121627 bytes 27643719 (27.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 169045 bytes 30775576 (30.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 169045 bytes 30775576 (30.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 90562 bytes 21040871 (21.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 121705 bytes 27658060 (27.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 169168 bytes 30793290 (30.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 169168 bytes 30793290 (30.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 90668 bytes 21064712 (21.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 121834 bytes 27681832 (27.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 169320 bytes 30812897 (30.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 169320 bytes 30812897 (30.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 90740 bytes 21081038 (21.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 121924 bytes 27697163 (27.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 169460 bytes 30832809 (30.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 169460 bytes 30832809 (30.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 90801 bytes 21095921 (21.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 122002 bytes 27711521 (27.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 169573 bytes 30849979 (30.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 169573 bytes 30849979 (30.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 90880 bytes 21117499 (21.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 122099 bytes 27727961 (27.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 169715 bytes 30870241 (30.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 169715 bytes 30870241 (30.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 90948 bytes 21133768 (21.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 122193 bytes 27743511 (27.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 169840 bytes 30888095 (30.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 169840 bytes 30888095 (30.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 91048 bytes 21158105 (21.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 122320 bytes 27767071 (27.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 169993 bytes 30907730 (30.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 169993 bytes 30907730 (30.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 91116 bytes 21174182 (21.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 122406 bytes 27782081 (27.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 170129 bytes 30927375 (30.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 170129 bytes 30927375 (30.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 91178 bytes 21189607 (21.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 122486 bytes 27796575 (27.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 170253 bytes 30945177 (30.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 170253 bytes 30945177 (30.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 91249 bytes 21206037 (21.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 122575 bytes 27812940 (27.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 170389 bytes 30964983 (30.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 170389 bytes 30964983 (30.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 91309 bytes 21220912 (21.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 122652 bytes 27827176 (27.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 170509 bytes 30982541 (30.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 170509 bytes 30982541 (30.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 91425 bytes 21245393 (21.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 122780 bytes 27850994 (27.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 170652 bytes 31001600 (31.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 170652 bytes 31001600 (31.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 91506 bytes 21272551 (21.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 122887 bytes 27868106 (27.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 170792 bytes 31021674 (31.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 170792 bytes 31021674 (31.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 91563 bytes 21287325 (21.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 122965 bytes 27882431 (27.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 170909 bytes 31039112 (31.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 170909 bytes 31039112 (31.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 91639 bytes 21303984 (21.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 123054 bytes 27897736 (27.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 171043 bytes 31058756 (31.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 171043 bytes 31058756 (31.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 91692 bytes 21318431 (21.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 123127 bytes 27911620 (27.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 171149 bytes 31075360 (31.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 171149 bytes 31075360 (31.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 91794 bytes 21341883 (21.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 123254 bytes 27935215 (27.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 171294 bytes 31094614 (31.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 171294 bytes 31094614 (31.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 91858 bytes 21357860 (21.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 123346 bytes 27950652 (27.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 171442 bytes 31115061 (31.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 171442 bytes 31115061 (31.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 91916 bytes 21373581 (21.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 123422 bytes 27964834 (27.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 171558 bytes 31132257 (31.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 171558 bytes 31132257 (31.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 91992 bytes 21394802 (21.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 123525 bytes 27981527 (27.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 171690 bytes 31151843 (31.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 171690 bytes 31151843 (31.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 92046 bytes 21409464 (21.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 123606 bytes 27996117 (27.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 171807 bytes 31169283 (31.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 171807 bytes 31169283 (31.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 92134 bytes 21429172 (21.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 123714 bytes 28015526 (28.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 171945 bytes 31188044 (31.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 171945 bytes 31188044 (31.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 92205 bytes 21446605 (21.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 123808 bytes 28030612 (28.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 172039 bytes 31200468 (31.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 172039 bytes 31200468 (31.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 92271 bytes 21462377 (21.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 123890 bytes 28045253 (28.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 172162 bytes 31218194 (31.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 172162 bytes 31218194 (31.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 92344 bytes 21478933 (21.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 123982 bytes 28060677 (28.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 172296 bytes 31237920 (31.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 172296 bytes 31237920 (31.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 92401 bytes 21493720 (21.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 124061 bytes 28075157 (28.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 172420 bytes 31255722 (31.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 172420 bytes 31255722 (31.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 92490 bytes 21513434 (21.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 124169 bytes 28094585 (28.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 172554 bytes 31274223 (31.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 172554 bytes 31274223 (31.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 92592 bytes 21539327 (21.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 124294 bytes 28115861 (28.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 172705 bytes 31295023 (31.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 172705 bytes 31295023 (31.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 92653 bytes 21554390 (21.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 124373 bytes 28130369 (28.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 172831 bytes 31312943 (31.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 172831 bytes 31312943 (31.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 92725 bytes 21570952 (21.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 124464 bytes 28145742 (28.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 172968 bytes 31332767 (31.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 172968 bytes 31332767 (31.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 92782 bytes 21585623 (21.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 124539 bytes 28159930 (28.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 173076 bytes 31349713 (31.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 173076 bytes 31349713 (31.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 92865 bytes 21605163 (21.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 124641 bytes 28179017 (28.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 173213 bytes 31368382 (31.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 173213 bytes 31368382 (31.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 92953 bytes 21625402 (21.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 124753 bytes 28198712 (28.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 173347 bytes 31388042 (31.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 173347 bytes 31388042 (31.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 93014 bytes 21640617 (21.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 124833 bytes 28213206 (28.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 173473 bytes 31405963 (31.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 173473 bytes 31405963 (31.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 93093 bytes 21664804 (21.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 124939 bytes 28230301 (28.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 173613 bytes 31426001 (31.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 173613 bytes 31426001 (31.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 93154 bytes 21679738 (21.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 125018 bytes 28244700 (28.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 173738 bytes 31443881 (31.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 173738 bytes 31443881 (31.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 93220 bytes 21697411 (21.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 125103 bytes 28259768 (28.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 173870 bytes 31462101 (31.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 173870 bytes 31462101 (31.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 93334 bytes 21722280 (21.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 125235 bytes 28283611 (28.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 174017 bytes 31482649 (31.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 174017 bytes 31482649 (31.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 93392 bytes 21737301 (21.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 125315 bytes 28298159 (28.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 174141 bytes 31500466 (31.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 174141 bytes 31500466 (31.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 93458 bytes 21753316 (21.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 125404 bytes 28313421 (28.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 174276 bytes 31520256 (31.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 174276 bytes 31520256 (31.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 93520 bytes 21768493 (21.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 125486 bytes 28328109 (28.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 174398 bytes 31537954 (31.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 174398 bytes 31537954 (31.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 93578 bytes 21783244 (21.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 125566 bytes 28342627 (28.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 174522 bytes 31555720 (31.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 174522 bytes 31555720 (31.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 93702 bytes 21813653 (21.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 125717 bytes 28368614 (28.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 174689 bytes 31577540 (31.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 174689 bytes 31577540 (31.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 93760 bytes 21828416 (21.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 125796 bytes 28383070 (28.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 174816 bytes 31595476 (31.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 174816 bytes 31595476 (31.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 93836 bytes 21845561 (21.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 125890 bytes 28399249 (28.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 174949 bytes 31615150 (31.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 174949 bytes 31615150 (31.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok b'Error on request' Token e243aac39fb012c084cfefeb2a6a3641 is maybe invalid erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 93895 bytes 21860475 (21.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 125970 bytes 28413807 (28.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 175072 bytes 31632900 (31.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 175072 bytes 31632900 (31.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 93955 bytes 21875621 (21.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 126048 bytes 28428213 (28.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 175190 bytes 31650330 (31.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 175190 bytes 31650330 (31.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 94064 bytes 21900107 (21.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 126175 bytes 28451823 (28.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 175343 bytes 31671229 (31.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 175343 bytes 31671229 (31.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 94127 bytes 21915209 (21.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 126258 bytes 28466450 (28.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 175471 bytes 31689253 (31.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 175471 bytes 31689253 (31.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 94208 bytes 21937659 (21.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 126358 bytes 28483097 (28.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 175612 bytes 31709343 (31.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 175612 bytes 31709343 (31.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 94272 bytes 21953171 (21.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 126437 bytes 28497498 (28.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 175734 bytes 31727103 (31.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 175734 bytes 31727103 (31.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 94332 bytes 21968141 (21.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 126515 bytes 28511850 (28.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 175857 bytes 31744829 (31.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 175857 bytes 31744829 (31.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 94443 bytes 21992828 (21.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 126646 bytes 28535813 (28.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 176002 bytes 31765156 (31.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 176002 bytes 31765156 (31.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 94505 bytes 22008404 (22.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 126736 bytes 28551070 (28.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 176135 bytes 31783558 (31.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 176135 bytes 31783558 (31.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 94572 bytes 22024454 (22.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 126823 bytes 28566097 (28.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 176268 bytes 31803174 (31.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 176268 bytes 31803174 (31.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 94640 bytes 22039793 (22.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 126899 bytes 28581435 (28.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 176385 bytes 31820458 (31.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 176385 bytes 31820458 (31.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 94703 bytes 22056012 (22.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 126981 bytes 28596119 (28.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 176506 bytes 31838118 (31.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 176506 bytes 31838118 (31.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 94825 bytes 22087228 (22.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 127130 bytes 28622106 (28.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 176668 bytes 31859629 (31.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 176668 bytes 31859629 (31.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 94891 bytes 22102511 (22.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 127218 bytes 28637296 (28.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 176807 bytes 31878331 (31.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 176807 bytes 31878331 (31.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 94960 bytes 22118809 (22.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 127306 bytes 28652435 (28.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 176930 bytes 31897343 (31.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 176930 bytes 31897343 (31.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 95014 bytes 22133332 (22.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 127384 bytes 28666817 (28.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 177046 bytes 31914669 (31.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 177046 bytes 31914669 (31.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 95074 bytes 22148510 (22.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 127468 bytes 28681825 (28.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 177173 bytes 31932627 (31.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 177173 bytes 31932627 (31.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 95167 bytes 22169112 (22.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 127582 bytes 28701883 (28.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 177316 bytes 31952828 (31.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 177316 bytes 31952828 (31.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 95241 bytes 22187752 (22.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 127684 bytes 28720729 (28.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 177445 bytes 31971073 (31.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 177445 bytes 31971073 (31.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 95320 bytes 22209276 (22.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 127786 bytes 28737574 (28.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 177591 bytes 31991517 (31.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 177591 bytes 31991517 (31.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 95385 bytes 22226282 (22.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 127876 bytes 28752827 (28.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 177703 bytes 32008635 (32.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 177703 bytes 32008635 (32.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 95447 bytes 22241420 (22.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 127960 bytes 28767668 (28.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 177822 bytes 32026177 (32.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 177822 bytes 32026177 (32.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 95535 bytes 22261743 (22.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 128072 bytes 28787539 (28.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 177958 bytes 32046034 (32.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 177958 bytes 32046034 (32.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 95612 bytes 22280711 (22.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 128170 bytes 28806129 (28.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 178086 bytes 32064178 (32.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 178086 bytes 32064178 (32.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 95693 bytes 22297959 (22.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 128266 bytes 28822020 (28.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 178230 bytes 32084405 (32.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 178230 bytes 32084405 (32.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 95754 bytes 22314170 (22.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 128351 bytes 28836820 (28.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 178349 bytes 32101887 (32.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 178349 bytes 32101887 (32.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 95815 bytes 22328904 (22.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 128433 bytes 28851520 (28.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 178463 bytes 32119099 (32.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 178463 bytes 32119099 (32.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 95913 bytes 22354626 (22.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 128555 bytes 28872651 (28.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 178607 bytes 32139418 (32.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 178607 bytes 32139418 (32.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 95992 bytes 22373749 (22.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 128659 bytes 28891588 (28.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 178739 bytes 32157868 (32.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 178739 bytes 32157868 (32.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 96066 bytes 22390499 (22.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 128754 bytes 28907298 (28.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 178880 bytes 32177938 (32.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 178880 bytes 32177938 (32.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 96128 bytes 22405461 (22.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 128833 bytes 28922077 (28.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 178992 bytes 32194984 (32.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 178992 bytes 32194984 (32.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 96185 bytes 22420268 (22.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 128911 bytes 28936415 (28.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 179115 bytes 32212734 (32.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 179115 bytes 32212734 (32.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 96253 bytes 22436409 (22.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 129003 bytes 28952056 (28.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 179252 bytes 32232504 (32.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 179252 bytes 32232504 (32.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 96355 bytes 22459820 (22.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 129127 bytes 28975256 (28.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 179400 bytes 32251926 (32.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 179400 bytes 32251926 (32.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 96440 bytes 22482261 (22.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 129231 bytes 28992314 (28.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 179544 bytes 32272232 (32.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 179544 bytes 32272232 (32.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 96500 bytes 22497557 (22.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 129317 bytes 29007162 (29.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 179671 bytes 32290252 (32.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 179671 bytes 32290252 (32.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 96558 bytes 22512455 (22.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 129399 bytes 29021774 (29.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 179790 bytes 32307770 (32.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 179790 bytes 32307770 (32.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 96627 bytes 22528776 (22.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 129489 bytes 29038235 (29.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 179914 bytes 32326776 (32.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 179914 bytes 32326776 (32.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 96728 bytes 22552115 (22.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 129614 bytes 29061728 (29.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 180057 bytes 32345951 (32.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 180057 bytes 32345951 (32.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 96800 bytes 22568869 (22.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 129707 bytes 29077349 (29.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 180190 bytes 32365639 (32.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 180190 bytes 32365639 (32.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 96859 bytes 22583948 (22.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 129784 bytes 29091636 (29.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 180310 bytes 32383197 (32.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 180310 bytes 32383197 (32.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 96917 bytes 22598719 (22.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 129863 bytes 29106056 (29.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 180431 bytes 32400819 (32.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 180431 bytes 32400819 (32.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 96999 bytes 22620263 (22.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 129963 bytes 29122666 (29.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 180562 bytes 32420249 (32.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 180562 bytes 32420249 (32.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 97107 bytes 22644283 (22.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 130093 bytes 29146599 (29.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 180712 bytes 32439813 (32.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 180712 bytes 32439813 (32.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 97175 bytes 22660481 (22.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 130185 bytes 29162150 (29.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 180853 bytes 32459895 (32.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 180853 bytes 32459895 (32.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 97232 bytes 22675348 (22.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 130266 bytes 29176742 (29.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 180978 bytes 32477749 (32.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 180978 bytes 32477749 (32.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 97289 bytes 22690174 (22.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 130343 bytes 29191015 (29.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 181096 bytes 32495179 (32.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 181096 bytes 32495179 (32.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 97350 bytes 22706842 (22.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 130425 bytes 29205782 (29.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 181211 bytes 32513539 (32.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 181211 bytes 32513539 (32.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok b'Error on request' Token e243aac39fb012c084cfefeb2a6a3641 is maybe invalid erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 97454 bytes 22730434 (22.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 130550 bytes 29229134 (29.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 181362 bytes 32533129 (32.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 181362 bytes 32533129 (32.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 97542 bytes 22753644 (22.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 130664 bytes 29248036 (29.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 181518 bytes 32554274 (32.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 181518 bytes 32554274 (32.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 97600 bytes 22768373 (22.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 130741 bytes 29262306 (29.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 181634 bytes 32571700 (32.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 181634 bytes 32571700 (32.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 97660 bytes 22783367 (22.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 130817 bytes 29276599 (29.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 181741 bytes 32588404 (32.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 181741 bytes 32588404 (32.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 97722 bytes 22799149 (22.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 130904 bytes 29291862 (29.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 181871 bytes 32607722 (32.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 181871 bytes 32607722 (32.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 97826 bytes 22822630 (22.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 131030 bytes 29315240 (29.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 182026 bytes 32627520 (32.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 182026 bytes 32627520 (32.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 97897 bytes 22838848 (22.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 131119 bytes 29330473 (29.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 182167 bytes 32647721 (32.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 182167 bytes 32647721 (32.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 97952 bytes 22853439 (22.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 131192 bytes 29344425 (29.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 182278 bytes 32664657 (32.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 182278 bytes 32664657 (32.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 98009 bytes 22868225 (22.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 131271 bytes 29358836 (29.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 182393 bytes 32681991 (32.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 182393 bytes 32681991 (32.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 98091 bytes 22890961 (22.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 131372 bytes 29375533 (29.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 182531 bytes 32701819 (32.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 182531 bytes 32701819 (32.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 98176 bytes 22910482 (22.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 131479 bytes 29394897 (29.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 182671 bytes 32720684 (32.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 182671 bytes 32720684 (32.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 98270 bytes 22931332 (22.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 131596 bytes 29415029 (29.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 182817 bytes 32741206 (32.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 182817 bytes 32741206 (32.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 98327 bytes 22946099 (22.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 131674 bytes 29429439 (29.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 182943 bytes 32759088 (32.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 182943 bytes 32759088 (32.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 98390 bytes 22961285 (22.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 131755 bytes 29443979 (29.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 183064 bytes 32776690 (32.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 183064 bytes 32776690 (32.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 98452 bytes 22976975 (22.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 131842 bytes 29459048 (29.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 183187 bytes 32795620 (32.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 183187 bytes 32795620 (32.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 98538 bytes 22996366 (22.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 131948 bytes 29478281 (29.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 183327 bytes 32814468 (32.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 183327 bytes 32814468 (32.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 98639 bytes 23023003 (23.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 132072 bytes 29499355 (29.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 183485 bytes 32835672 (32.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 183485 bytes 32835672 (32.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 98706 bytes 23038639 (23.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 132158 bytes 29514239 (29.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 183617 bytes 32853931 (32.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 183617 bytes 32853931 (32.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 98768 bytes 23053716 (23.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 132241 bytes 29528899 (29.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 183741 bytes 32871759 (32.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 183741 bytes 32871759 (32.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 98830 bytes 23069502 (23.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 132326 bytes 29543795 (29.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 183870 bytes 32891001 (32.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 183870 bytes 32891001 (32.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 98911 bytes 23088678 (23.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 132433 bytes 29563246 (29.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 184010 bytes 32909742 (32.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 184010 bytes 32909742 (32.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 99002 bytes 23109236 (23.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 132546 bytes 29582972 (29.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 184166 bytes 32930782 (32.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 184166 bytes 32930782 (32.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 99063 bytes 23124095 (23.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 132626 bytes 29597470 (29.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 184294 bytes 32948771 (32.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 184294 bytes 32948771 (32.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 99125 bytes 23139189 (23.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 132707 bytes 29612077 (29.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 184420 bytes 32966653 (32.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 184420 bytes 32966653 (32.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 99205 bytes 23160853 (23.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 132810 bytes 29628997 (29.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 184561 bytes 32986625 (32.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 184561 bytes 32986625 (32.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 99264 bytes 23175696 (23.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 132889 bytes 29643573 (29.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 184677 bytes 33004014 (33.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 184677 bytes 33004014 (33.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 99379 bytes 23200682 (23.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 133022 bytes 29667620 (29.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 184841 bytes 33025686 (33.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 184841 bytes 33025686 (33.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 99438 bytes 23215537 (23.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 133098 bytes 29681794 (29.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 184973 bytes 33043906 (33.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 184973 bytes 33043906 (33.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 99502 bytes 23230767 (23.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 133181 bytes 29696557 (29.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 185095 bytes 33061604 (33.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 185095 bytes 33061604 (33.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 99567 bytes 23246820 (23.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 133268 bytes 29711662 (29.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 185221 bytes 33080690 (33.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 185221 bytes 33080690 (33.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 99631 bytes 23262066 (23.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 133348 bytes 29726239 (29.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 185341 bytes 33098260 (33.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 185341 bytes 33098260 (33.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 99761 bytes 23293961 (23.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 133504 bytes 29752712 (29.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 185512 bytes 33120354 (33.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 185512 bytes 33120354 (33.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 99823 bytes 23308995 (23.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 133586 bytes 29767412 (29.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 185647 bytes 33138805 (33.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 185647 bytes 33138805 (33.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 99882 bytes 23324207 (23.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 133670 bytes 29782281 (29.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 185760 bytes 33156037 (33.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 185760 bytes 33156037 (33.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 99940 bytes 23339708 (23.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 133751 bytes 29796973 (29.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 185879 bytes 33174723 (33.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 185879 bytes 33174723 (33.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 100000 bytes 23354786 (23.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 133833 bytes 29811665 (29.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 186005 bytes 33192667 (33.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 186005 bytes 33192667 (33.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 100118 bytes 23381293 (23.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 133971 bytes 29836568 (29.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 186162 bytes 33213796 (33.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 186162 bytes 33213796 (33.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 100184 bytes 23396572 (23.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 134055 bytes 29851458 (29.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 186305 bytes 33232743 (33.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 186305 bytes 33232743 (33.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 100243 bytes 23411818 (23.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 134138 bytes 29866201 (29.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 186422 bytes 33250181 (33.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 186422 bytes 33250181 (33.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 100323 bytes 23433414 (23.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 134236 bytes 29883755 (29.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 186559 bytes 33269983 (33.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 186559 bytes 33269983 (33.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 100383 bytes 23448357 (23.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 134312 bytes 29897985 (29.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 186677 bytes 33287283 (33.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 186677 bytes 33287283 (33.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 100492 bytes 23473085 (23.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 134456 bytes 29923372 (29.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 186834 bytes 33308662 (33.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 186834 bytes 33308662 (33.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 100512 bytes 23479104 (23.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 134493 bytes 29928483 (29.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 186865 bytes 33310763 (33.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 186865 bytes 33310763 (33.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 100536 bytes 23487758 (23.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 134526 bytes 29934250 (29.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 186883 bytes 33312019 (33.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 186883 bytes 33312019 (33.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 100562 bytes 23494833 (23.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 134562 bytes 29939274 (29.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 186903 bytes 33314477 (33.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 186903 bytes 33314477 (33.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 100585 bytes 23500969 (23.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 134594 bytes 29943909 (29.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 186921 bytes 33315733 (33.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 186921 bytes 33315733 (33.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 100677 bytes 23523955 (23.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 134705 bytes 29960902 (29.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 186988 bytes 33321386 (33.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 186988 bytes 33321386 (33.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 100697 bytes 23529911 (23.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 134741 bytes 29966075 (29.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 187013 bytes 33323057 (33.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 187013 bytes 33323057 (33.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 100718 bytes 23536183 (23.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 134772 bytes 29970654 (29.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 187033 bytes 33324417 (33.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 187033 bytes 33324417 (33.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 100749 bytes 23543474 (23.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 134815 bytes 29976134 (29.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 187061 bytes 33327469 (33.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 187061 bytes 33327469 (33.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 100770 bytes 23549446 (23.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 134847 bytes 29980719 (29.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 187079 bytes 33328725 (33.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 187079 bytes 33328725 (33.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 100826 bytes 23561445 (23.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 134912 bytes 29990766 (29.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 187132 bytes 33333427 (33.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 187132 bytes 33333427 (33.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 100880 bytes 23575947 (23.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 134994 bytes 30005430 (30.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 187210 bytes 33343764 (33.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 187210 bytes 33343764 (33.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 100944 bytes 23591383 (23.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 135073 bytes 30019815 (30.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 187342 bytes 33361961 (33.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 187342 bytes 33361961 (33.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 101026 bytes 23613167 (23.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 135174 bytes 30036483 (30.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 187478 bytes 33381685 (33.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 187478 bytes 33381685 (33.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 101085 bytes 23627998 (23.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 135254 bytes 30051029 (30.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 187604 bytes 33399617 (33.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 187604 bytes 33399617 (33.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 101180 bytes 23648949 (23.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 135368 bytes 30070952 (30.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 187759 bytes 33420625 (33.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 187759 bytes 33420625 (33.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 101262 bytes 23668229 (23.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 135468 bytes 30089670 (30.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 187894 bytes 33439231 (33.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 187894 bytes 33439231 (33.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 101328 bytes 23683763 (23.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 135554 bytes 30104655 (30.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 188025 bytes 33457375 (33.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 188025 bytes 33457375 (33.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 101395 bytes 23699794 (23.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 135641 bytes 30120825 (30.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 188158 bytes 33476849 (33.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 188158 bytes 33476849 (33.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 101457 bytes 23715744 (23.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 135719 bytes 30135224 (30.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 188279 bytes 33494471 (33.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 188279 bytes 33494471 (33.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 101563 bytes 23741644 (23.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 135841 bytes 30156479 (30.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 188441 bytes 33515968 (33.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 188441 bytes 33515968 (33.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 101647 bytes 23761248 (23.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 135946 bytes 30175421 (30.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 188578 bytes 33534592 (33.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 188578 bytes 33534592 (33.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 101707 bytes 23776180 (23.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 136027 bytes 30189990 (30.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 188710 bytes 33552825 (33.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 188710 bytes 33552825 (33.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 101773 bytes 23792334 (23.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 136111 bytes 30204897 (30.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 188835 bytes 33571883 (33.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 188835 bytes 33571883 (33.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 101829 bytes 23806926 (23.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 136186 bytes 30219038 (30.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 188952 bytes 33589225 (33.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 188952 bytes 33589225 (33.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 101907 bytes 23826184 (23.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 136284 bytes 30235260 (30.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 189094 bytes 33609359 (33.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 189094 bytes 33609359 (33.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 102008 bytes 23849547 (23.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 136405 bytes 30258266 (30.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 189227 bytes 33627939 (33.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 189227 bytes 33627939 (33.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 102068 bytes 23864595 (23.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 136484 bytes 30272651 (30.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 189360 bytes 33646223 (33.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 189360 bytes 33646223 (33.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 102140 bytes 23885675 (23.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 136583 bytes 30289219 (30.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 189483 bytes 33665261 (33.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 189483 bytes 33665261 (33.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 102196 bytes 23900414 (23.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 136661 bytes 30303629 (30.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 189603 bytes 33682881 (33.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 189603 bytes 33682881 (33.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 102266 bytes 23916745 (23.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 136751 bytes 30318985 (30.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 189735 bytes 33702515 (33.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 189735 bytes 33702515 (33.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 102381 bytes 23940967 (23.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 136883 bytes 30343068 (30.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 189897 bytes 33722739 (33.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 189897 bytes 33722739 (33.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 102451 bytes 23956443 (23.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 136968 bytes 30358160 (30.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 190026 bytes 33740804 (33.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 190026 bytes 33740804 (33.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 102514 bytes 23972310 (23.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 137051 bytes 30372922 (30.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 190152 bytes 33759914 (33.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 190152 bytes 33759914 (33.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 102578 bytes 23987422 (23.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 137132 bytes 30387487 (30.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 190269 bytes 33777352 (33.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 190269 bytes 33777352 (33.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 102664 bytes 24009561 (24.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 137242 bytes 30404892 (30.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 190411 bytes 33797576 (33.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 190411 bytes 33797576 (33.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 102773 bytes 24033452 (24.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 137367 bytes 30428237 (30.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 190557 bytes 33816717 (33.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 190557 bytes 33816717 (33.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 102837 bytes 24048560 (24.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 137455 bytes 30443351 (30.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 190697 bytes 33835543 (33.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 190697 bytes 33835543 (33.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 102900 bytes 24064291 (24.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 137540 bytes 30459486 (30.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 190825 bytes 33854697 (33.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 190825 bytes 33854697 (33.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 102956 bytes 24079054 (24.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 137617 bytes 30473733 (30.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 190950 bytes 33872515 (33.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 190950 bytes 33872515 (33.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 103027 bytes 24095400 (24.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 137704 bytes 30488845 (30.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 191079 bytes 33891805 (33.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 191079 bytes 33891805 (33.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 103133 bytes 24119108 (24.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 137834 bytes 30513760 (30.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 191228 bytes 33911256 (33.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 191228 bytes 33911256 (33.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 103195 bytes 24134998 (24.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 137920 bytes 30528743 (30.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 191354 bytes 33929295 (33.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 191354 bytes 33929295 (33.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok b'Error on request' Token e243aac39fb012c084cfefeb2a6a3641 is maybe invalid erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 103277 bytes 24157677 (24.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 138019 bytes 30545671 (30.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 191483 bytes 33948563 (33.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 191483 bytes 33948563 (33.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 103331 bytes 24172233 (24.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 138099 bytes 30560274 (30.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 191597 bytes 33965785 (33.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 191597 bytes 33965785 (33.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 103397 bytes 24188415 (24.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 138190 bytes 30575772 (30.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 191732 bytes 33985543 (33.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 191732 bytes 33985543 (33.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 103500 bytes 24211915 (24.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 138318 bytes 30599457 (30.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 191874 bytes 34004656 (34.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 191874 bytes 34004656 (34.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 103557 bytes 24226630 (24.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 138397 bytes 30613917 (30.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 191998 bytes 34022400 (34.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 191998 bytes 34022400 (34.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 103621 bytes 24243558 (24.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 138489 bytes 30629448 (30.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 192124 bytes 34041522 (34.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 192124 bytes 34041522 (34.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 103679 bytes 24258585 (24.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 138573 bytes 30644290 (30.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 192243 bytes 34059090 (34.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 192243 bytes 34059090 (34.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 103773 bytes 24284793 (24.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 138686 bytes 30663029 (30.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 192386 bytes 34079320 (34.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 192386 bytes 34079320 (34.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 103870 bytes 24306109 (24.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 138801 bytes 30683055 (30.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 192530 bytes 34098332 (34.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 192530 bytes 34098332 (34.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 103954 bytes 24325414 (24.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 138902 bytes 30701787 (30.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 192662 bytes 34116668 (34.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 192662 bytes 34116668 (34.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 104031 bytes 24342306 (24.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 138998 bytes 30719242 (30.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 192803 bytes 34136647 (34.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 192803 bytes 34136647 (34.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 104094 bytes 24357526 (24.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 139082 bytes 30734135 (30.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 192925 bytes 34154345 (34.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 192925 bytes 34154345 (34.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 104165 bytes 24374103 (24.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 139175 bytes 30749678 (30.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 193056 bytes 34173891 (34.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 193056 bytes 34173891 (34.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 104258 bytes 24393934 (24.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 139282 bytes 30769313 (30.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 193186 bytes 34192159 (34.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 193186 bytes 34192159 (34.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 104344 bytes 24413450 (24.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 139386 bytes 30788287 (30.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 193318 bytes 34210609 (34.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 193318 bytes 34210609 (34.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 104420 bytes 24434895 (24.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 139485 bytes 30804840 (30.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 193452 bytes 34230195 (34.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 193452 bytes 34230195 (34.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 104479 bytes 24449767 (24.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 139566 bytes 30819405 (30.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 193573 bytes 34247817 (34.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 193573 bytes 34247817 (34.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 104550 bytes 24466221 (24.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 139658 bytes 30834920 (30.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 193716 bytes 34268051 (34.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 193716 bytes 34268051 (34.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 104638 bytes 24485878 (24.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 139766 bytes 30854518 (30.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 193851 bytes 34286543 (34.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 193851 bytes 34286543 (34.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 104720 bytes 24504868 (24.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 139870 bytes 30873514 (30.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 193982 bytes 34304843 (34.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 193982 bytes 34304843 (34.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 104784 bytes 24520723 (24.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 139958 bytes 30888694 (30.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 194125 bytes 34324875 (34.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 194125 bytes 34324875 (34.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 104838 bytes 24535334 (24.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 140035 bytes 30903018 (30.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 194241 bytes 34342263 (34.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 194241 bytes 34342263 (34.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 104919 bytes 24556927 (24.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 140137 bytes 30919985 (30.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 194385 bytes 34362555 (34.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 194385 bytes 34362555 (34.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 104980 bytes 24572272 (24.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 140224 bytes 30935208 (30.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 194508 bytes 34380271 (34.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 194508 bytes 34380271 (34.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 105081 bytes 24595555 (24.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 140351 bytes 30958761 (30.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 194645 bytes 34398999 (34.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 194645 bytes 34398999 (34.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 105147 bytes 24612568 (24.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 140438 bytes 30973910 (30.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 194778 bytes 34418452 (34.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 194778 bytes 34418452 (34.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 105205 bytes 24627491 (24.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 140518 bytes 30988466 (30.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 194896 bytes 34436004 (34.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 194896 bytes 34436004 (34.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 105268 bytes 24643514 (24.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 140606 bytes 31003653 (31.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 195031 bytes 34455782 (34.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 195031 bytes 34455782 (34.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 105324 bytes 24658250 (24.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 140686 bytes 31018148 (31.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 195149 bytes 34473248 (34.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 195149 bytes 34473248 (34.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 105434 bytes 24682088 (24.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 140815 bytes 31041937 (31.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 195291 bytes 34492337 (34.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 195291 bytes 34492337 (34.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 105514 bytes 24704669 (24.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 140918 bytes 31058802 (31.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 195438 bytes 34512696 (34.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 195438 bytes 34512696 (34.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 105577 bytes 24719740 (24.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 140996 bytes 31073120 (31.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 195561 bytes 34530386 (34.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 195561 bytes 34530386 (34.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 105645 bytes 24736951 (24.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 141085 bytes 31088424 (31.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 195696 bytes 34550140 (34.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 195696 bytes 34550140 (34.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 105711 bytes 24752210 (24.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 141161 bytes 31102645 (31.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 195818 bytes 34567900 (34.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 195818 bytes 34567900 (34.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 105814 bytes 24775560 (24.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 141286 bytes 31126114 (31.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 195957 bytes 34586688 (34.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 195957 bytes 34586688 (34.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 105883 bytes 24792652 (24.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 141378 bytes 31141569 (31.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 196096 bytes 34606607 (34.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 196096 bytes 34606607 (34.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 105936 bytes 24807200 (24.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 141456 bytes 31155975 (31.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 196218 bytes 34624307 (34.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 196218 bytes 34624307 (34.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 106017 bytes 24829507 (24.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 141559 bytes 31173007 (31.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 196354 bytes 34644139 (34.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 196354 bytes 34644139 (34.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 106072 bytes 24844365 (24.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 141637 bytes 31187358 (31.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 196460 bytes 34660779 (34.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 196460 bytes 34660779 (34.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 106191 bytes 24869246 (24.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 141770 bytes 31211761 (31.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 196612 bytes 34680385 (34.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 196612 bytes 34680385 (34.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 106255 bytes 24885281 (24.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 141860 bytes 31227157 (31.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 196752 bytes 34700392 (34.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 196752 bytes 34700392 (34.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 106310 bytes 24899953 (24.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 141935 bytes 31241346 (31.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 196858 bytes 34717080 (34.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 196858 bytes 34717080 (34.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 106383 bytes 24917463 (24.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 142030 bytes 31257311 (31.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 196987 bytes 34736452 (34.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 196987 bytes 34736452 (34.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 106443 bytes 24932339 (24.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 142109 bytes 31271696 (31.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 197105 bytes 34753918 (34.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 197105 bytes 34753918 (34.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 106550 bytes 24957037 (24.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 142240 bytes 31295629 (31.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 197262 bytes 34773847 (34.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 197262 bytes 34773847 (34.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 106637 bytes 24978955 (24.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 142342 bytes 31312373 (31.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 197396 bytes 34793494 (34.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 197396 bytes 34793494 (34.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 106700 bytes 24994075 (24.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 142421 bytes 31326829 (31.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 197521 bytes 34811348 (34.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 197521 bytes 34811348 (34.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 106767 bytes 25010653 (25.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 142515 bytes 31342480 (31.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 197649 bytes 34830716 (34.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 197649 bytes 34830716 (34.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 106819 bytes 25025045 (25.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 142593 bytes 31356883 (31.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 197760 bytes 34847782 (34.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 197760 bytes 34847782 (34.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 106902 bytes 25044425 (25.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 142699 bytes 31376216 (31.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 197903 bytes 34866865 (34.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 197903 bytes 34866865 (34.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 106985 bytes 25064469 (25.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 142808 bytes 31395642 (31.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 198034 bytes 34886427 (34.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 198034 bytes 34886427 (34.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 107041 bytes 25079157 (25.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 142884 bytes 31409853 (31.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 198163 bytes 34904491 (34.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 198163 bytes 34904491 (34.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 107118 bytes 25100422 (25.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 142984 bytes 31426525 (31.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 198300 bytes 34924505 (34.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 198300 bytes 34924505 (34.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 107184 bytes 25115812 (25.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 143068 bytes 31442355 (31.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 198409 bytes 34941395 (34.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 198409 bytes 34941395 (34.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 107266 bytes 25134988 (25.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 143172 bytes 31461424 (31.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 198541 bytes 34959791 (34.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 198541 bytes 34959791 (34.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 107355 bytes 25155526 (25.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 143283 bytes 31481075 (31.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 198676 bytes 34979577 (34.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 198676 bytes 34979577 (34.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 107412 bytes 25170258 (25.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 143364 bytes 31496116 (31.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 198808 bytes 34997809 (34.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 198808 bytes 34997809 (34.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 107477 bytes 25186248 (25.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 143455 bytes 31511560 (31.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 198938 bytes 35017269 (35.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 198938 bytes 35017269 (35.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 107533 bytes 25200828 (25.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 143531 bytes 31525779 (31.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 199051 bytes 35034439 (35.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 199051 bytes 35034439 (35.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 107613 bytes 25219958 (25.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 143635 bytes 31544943 (31.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 199178 bytes 35052574 (35.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 199178 bytes 35052574 (35.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 107710 bytes 25245385 (25.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 143753 bytes 31565759 (31.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 199314 bytes 35072396 (35.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 199314 bytes 35072396 (35.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 107766 bytes 25259993 (25.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 143831 bytes 31580090 (31.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 199443 bytes 35090497 (35.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 199443 bytes 35090497 (35.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 107833 bytes 25277523 (25.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 143925 bytes 31595703 (31.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 199572 bytes 35109881 (35.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 199572 bytes 35109881 (35.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 107888 bytes 25292194 (25.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 144001 bytes 31609913 (31.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 199685 bytes 35127087 (35.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 199685 bytes 35127087 (35.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 107951 bytes 25307237 (25.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 144085 bytes 31625019 (31.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 199814 bytes 35145178 (35.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 199814 bytes 35145178 (35.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 108058 bytes 25331561 (25.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 144212 bytes 31648488 (31.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 199961 bytes 35165702 (35.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 199961 bytes 35165702 (35.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 108120 bytes 25346449 (25.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 144290 bytes 31662795 (31.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 200088 bytes 35183639 (35.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 200088 bytes 35183639 (35.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 108193 bytes 25362942 (25.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 144385 bytes 31678798 (31.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 200234 bytes 35204051 (35.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 200234 bytes 35204051 (35.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 108262 bytes 25383081 (25.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 144471 bytes 31693994 (31.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 200351 bytes 35221489 (35.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 200351 bytes 35221489 (35.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 108319 bytes 25398017 (25.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 144549 bytes 31708344 (31.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 200469 bytes 35238919 (35.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 200469 bytes 35238919 (35.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 108424 bytes 25422474 (25.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 144680 bytes 31732302 (31.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 200625 bytes 35260047 (35.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 200625 bytes 35260047 (35.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 108494 bytes 25438605 (25.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 144769 bytes 31748594 (31.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 200748 bytes 35277835 (35.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 200748 bytes 35277835 (35.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 108564 bytes 25456024 (25.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 144858 bytes 31763869 (31.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 200885 bytes 35297693 (35.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 200885 bytes 35297693 (35.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 108620 bytes 25470624 (25.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 144935 bytes 31778198 (31.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 201002 bytes 35315071 (35.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 201002 bytes 35315071 (35.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 108674 bytes 25485008 (25.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 145007 bytes 31792169 (31.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 201118 bytes 35332385 (35.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 201118 bytes 35332385 (35.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 108793 bytes 25515198 (25.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 145151 bytes 31817596 (31.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 201274 bytes 35353379 (35.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 201274 bytes 35353379 (35.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 108855 bytes 25530153 (25.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 145237 bytes 31832522 (31.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 201406 bytes 35371718 (35.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 201406 bytes 35371718 (35.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 108925 bytes 25546516 (25.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 145326 bytes 31847760 (31.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 201536 bytes 35391118 (35.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 201536 bytes 35391118 (35.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 108984 bytes 25561364 (25.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 145401 bytes 31861889 (31.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 201651 bytes 35408238 (35.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 201651 bytes 35408238 (35.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 109045 bytes 25576347 (25.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 145483 bytes 31876483 (31.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 201770 bytes 35425780 (35.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 201770 bytes 35425780 (35.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 109159 bytes 25601508 (25.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 145619 bytes 31900763 (31.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 201931 bytes 35447169 (35.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 201931 bytes 35447169 (35.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 109219 bytes 25616440 (25.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 145702 bytes 31915548 (31.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 202072 bytes 35466012 (35.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 202072 bytes 35466012 (35.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 109294 bytes 25638384 (25.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 145798 bytes 31931997 (31.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 202202 bytes 35485376 (35.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 202202 bytes 35485376 (35.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 109354 bytes 25653601 (25.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 145882 bytes 31946786 (31.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 202324 bytes 35503076 (35.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 202324 bytes 35503076 (35.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 109408 bytes 25668113 (25.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 145958 bytes 31961016 (31.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 202441 bytes 35520418 (35.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 202441 bytes 35520418 (35.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 109519 bytes 25692795 (25.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 146093 bytes 31985330 (31.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 202595 bytes 35541370 (35.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 202595 bytes 35541370 (35.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 109581 bytes 25707783 (25.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 146171 bytes 31999690 (31.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 202715 bytes 35558967 (35.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 202715 bytes 35558967 (35.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 109646 bytes 25723825 (25.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 146260 bytes 32014842 (32.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 202854 bytes 35578863 (35.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 202854 bytes 35578863 (35.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 109704 bytes 25738573 (25.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 146341 bytes 32029407 (32.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 202978 bytes 35596665 (35.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 202978 bytes 35596665 (35.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 109767 bytes 25754623 (25.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 146424 bytes 32044713 (32.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 203101 bytes 35614355 (35.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 203101 bytes 35614355 (35.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 109869 bytes 25780551 (25.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 146549 bytes 32066060 (32.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 203258 bytes 35635390 (35.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 203258 bytes 35635390 (35.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 109948 bytes 25799385 (25.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 146646 bytes 32084806 (32.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 203380 bytes 35653146 (35.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 203380 bytes 35653146 (35.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 110028 bytes 25816382 (25.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 146743 bytes 32101817 (32.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 203526 bytes 35673511 (35.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 203526 bytes 35673511 (35.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 110089 bytes 25831365 (25.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 146829 bytes 32116835 (32.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 203643 bytes 35690877 (35.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 203643 bytes 35690877 (35.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 110146 bytes 25846109 (25.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 146910 bytes 32131468 (32.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 203759 bytes 35708227 (35.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 203759 bytes 35708227 (35.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 110235 bytes 25866606 (25.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 147028 bytes 32151823 (32.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 203906 bytes 35728742 (35.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 203906 bytes 35728742 (35.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 110320 bytes 25886022 (25.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 147133 bytes 32170891 (32.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 204040 bytes 35747248 (35.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 204040 bytes 35747248 (35.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 110398 bytes 25907098 (25.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 147232 bytes 32187485 (32.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 204180 bytes 35767348 (35.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 204180 bytes 35767348 (35.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 110460 bytes 25922472 (25.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 147314 bytes 32202068 (32.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 204294 bytes 35784606 (35.7 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 204294 bytes 35784606 (35.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 110527 bytes 25937744 (25.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 147395 bytes 32217741 (32.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 204416 bytes 35802304 (35.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 204416 bytes 35802304 (35.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 110615 bytes 25958140 (25.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 147504 bytes 32237403 (32.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 204562 bytes 35822645 (35.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 204562 bytes 35822645 (35.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 110698 bytes 25977396 (25.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 147607 bytes 32256315 (32.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 204697 bytes 35841227 (35.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 204697 bytes 35841227 (35.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 110769 bytes 25993800 (25.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 147700 bytes 32271850 (32.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 204835 bytes 35861176 (35.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 204835 bytes 35861176 (35.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 110829 bytes 26008672 (26.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 147776 bytes 32286113 (32.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 204949 bytes 35878326 (35.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 204949 bytes 35878326 (35.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 110885 bytes 26024342 (26.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 147858 bytes 32300776 (32.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 205065 bytes 35895676 (35.8 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 205065 bytes 35895676 (35.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 110960 bytes 26045572 (26.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 147961 bytes 32317862 (32.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 205206 bytes 35915687 (35.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 205206 bytes 35915687 (35.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 111060 bytes 26068665 (26.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 148080 bytes 32340702 (32.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 205351 bytes 35934819 (35.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 205351 bytes 35934819 (35.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 111130 bytes 26084904 (26.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 148170 bytes 32356022 (32.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 205495 bytes 35955045 (35.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 205495 bytes 35955045 (35.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 111193 bytes 26100483 (26.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 148253 bytes 32371076 (32.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 205611 bytes 35972469 (35.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 205611 bytes 35972469 (35.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 111252 bytes 26115410 (26.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 148331 bytes 32385449 (32.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 205732 bytes 35990115 (35.9 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 205732 bytes 35990115 (35.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 111313 bytes 26131043 (26.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 148414 bytes 32400341 (32.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 205850 bytes 36008775 (36.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 205850 bytes 36008775 (36.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 111425 bytes 26154879 (26.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 148536 bytes 32424974 (32.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 205999 bytes 36028190 (36.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 205999 bytes 36028190 (36.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 111495 bytes 26171176 (26.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 148628 bytes 32440415 (32.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 206144 bytes 36048538 (36.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 206144 bytes 36048538 (36.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 111553 bytes 26186076 (26.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 148709 bytes 32455007 (32.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 206265 bytes 36066124 (36.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 206265 bytes 36066124 (36.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 111611 bytes 26200872 (26.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 148788 bytes 32469455 (32.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 206390 bytes 36083942 (36.0 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 206390 bytes 36083942 (36.0 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 111673 bytes 26216671 (26.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 148869 bytes 32484143 (32.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 206507 bytes 36102406 (36.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 206507 bytes 36102406 (36.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 111781 bytes 26240597 (26.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 149001 bytes 32508181 (32.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 206651 bytes 36121635 (36.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 206651 bytes 36121635 (36.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 111848 bytes 26257034 (26.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 149094 bytes 32523844 (32.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 206796 bytes 36142068 (36.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 206796 bytes 36142068 (36.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 111906 bytes 26271850 (26.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 149173 bytes 32538293 (32.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 206912 bytes 36159454 (36.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 206912 bytes 36159454 (36.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 111965 bytes 26286846 (26.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 149250 bytes 32552602 (32.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 207021 bytes 36176262 (36.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 207021 bytes 36176262 (36.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 112027 bytes 26302509 (26.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 149334 bytes 32567522 (32.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 207141 bytes 36195000 (36.1 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 207141 bytes 36195000 (36.1 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 112129 bytes 26326800 (26.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 149461 bytes 32591193 (32.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 207279 bytes 36213842 (36.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 207279 bytes 36213842 (36.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 112200 bytes 26343192 (26.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 149550 bytes 32606428 (32.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 207415 bytes 36233689 (36.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 207415 bytes 36233689 (36.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 112254 bytes 26357712 (26.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 149626 bytes 32620679 (32.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 207527 bytes 36250845 (36.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 207527 bytes 36250845 (36.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 112312 bytes 26372555 (26.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 149706 bytes 32635097 (32.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 207652 bytes 36268737 (36.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 207652 bytes 36268737 (36.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 112382 bytes 26388724 (26.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 149793 bytes 32650296 (32.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 207781 bytes 36288041 (36.2 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 207781 bytes 36288041 (36.2 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 112486 bytes 26412410 (26.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 149925 bytes 32674263 (32.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 207935 bytes 36307806 (36.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 207935 bytes 36307806 (36.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 112557 bytes 26428748 (26.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 150015 bytes 32689610 (32.6 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 208067 bytes 36327346 (36.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 208067 bytes 36327346 (36.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 112621 bytes 26444392 (26.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 150102 bytes 32704615 (32.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 208209 bytes 36346306 (36.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 208209 bytes 36346306 (36.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 112684 bytes 26459436 (26.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 150188 bytes 32719878 (32.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 208325 bytes 36363676 (36.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 208325 bytes 36363676 (36.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 112748 bytes 26475319 (26.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 150273 bytes 32734852 (32.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 208453 bytes 36382926 (36.3 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 208453 bytes 36382926 (36.3 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 112836 bytes 26495247 (26.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 150386 bytes 32754884 (32.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 208607 bytes 36402596 (36.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 208607 bytes 36402596 (36.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 112930 bytes 26516140 (26.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 150502 bytes 32774861 (32.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 208750 bytes 36422998 (36.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 208750 bytes 36422998 (36.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 113000 bytes 26532210 (26.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 150589 bytes 32790055 (32.7 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 208900 bytes 36442418 (36.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 208900 bytes 36442418 (36.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 113062 bytes 26547158 (26.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 150668 bytes 32804640 (32.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 209011 bytes 36459386 (36.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 209011 bytes 36459386 (36.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 113126 bytes 26563012 (26.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 150756 bytes 32819879 (32.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 209126 bytes 36477900 (36.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 209126 bytes 36477900 (36.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 113223 bytes 26583654 (26.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 150870 bytes 32839791 (32.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 209269 bytes 36496910 (36.4 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 209269 bytes 36496910 (36.4 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 113293 bytes 26600037 (26.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 150963 bytes 32855365 (32.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 209419 bytes 36517518 (36.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 209419 bytes 36517518 (36.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 113383 bytes 26620095 (26.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 151069 bytes 32874409 (32.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 209575 bytes 36537338 (36.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 209575 bytes 36537338 (36.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 113449 bytes 26635243 (26.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 151153 bytes 32889547 (32.8 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 209692 bytes 36554752 (36.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 209692 bytes 36554752 (36.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 113513 bytes 26651086 (26.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 151240 bytes 32904701 (32.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 209822 bytes 36574046 (36.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 209822 bytes 36574046 (36.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok erreur : [Errno 2] No such file or directory: '/home/nano/.fotonower_config/10072025/counter_photo' nb taken pictures : 0 outs: b'eth0: flags=4099 mtu 1500\n ether 48:b0:2d:3c:dd:df txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n device interrupt 150 base 0xe000 \n\neth1: flags=4163 mtu 1500\n inet 192.168.8.100 netmask 255.255.255.0 broadcast 192.168.8.255\n inet6 fe80::90b4:89e1:1323:722 prefixlen 64 scopeid 0x20\n ether 0c:5b:8f:27:9a:64 txqueuelen 1000 (Ethernet)\n RX packets 113600 bytes 26671198 (26.6 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 151352 bytes 32924578 (32.9 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nlo: flags=73 mtu 65536\n inet 127.0.0.1 netmask 255.0.0.0\n inet6 ::1 prefixlen 128 scopeid 0x10\n loop txqueuelen 1 (Local Loopback)\n RX packets 209973 bytes 36593584 (36.5 MB)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 209973 bytes 36593584 (36.5 MB)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nrndis0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:29 txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\nusb0: flags=4099 mtu 1500\n ether ba:a7:69:f8:42:2b txqueuelen 1000 (Ethernet)\n RX packets 0 bytes 0 (0.0 B)\n RX errors 0 dropped 0 overruns 0 frame 0\n TX packets 0 bytes 0 (0.0 B)\n TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0\n\n' /sbin/ifconfig Error : None file /home/nano/.log/2025/07/10/classify/new_classify.txt does not exist. All values set to 0. ip: 192.168.8.100- First part ok