erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2860695  bytes 663604163 (663.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3837223  bytes 754454669 (754.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5083149  bytes 807395232 (807.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5083149  bytes 807395232 (807.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/09/28/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2860762  bytes 663619102 (663.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3837308  bytes 754469496 (754.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5083290  bytes 807415185 (807.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5083290  bytes 807415185 (807.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/09/28/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2860819  bytes 663632824 (663.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3837388  bytes 754484016 (754.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5083411  bytes 807432893 (807.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5083411  bytes 807432893 (807.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/09/28/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2860873  bytes 663646175 (663.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3837467  bytes 754498511 (754.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5083533  bytes 807450555 (807.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5083533  bytes 807450555 (807.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/09/28/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2860940  bytes 663660987 (663.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3837560  bytes 754514157 (754.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5083674  bytes 807470707 (807.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5083674  bytes 807470707 (807.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/09/28/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2861044  bytes 663683721 (663.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3837686  bytes 754538155 (754.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5083818  bytes 807489957 (807.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5083818  bytes 807489957 (807.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/09/28/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2861107  bytes 663699596 (663.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3837771  bytes 754553073 (754.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5083955  bytes 807509650 (807.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5083955  bytes 807509650 (807.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/09/28/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2861167  bytes 663713540 (663.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3837851  bytes 754567684 (754.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5084073  bytes 807527104 (807.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5084073  bytes 807527104 (807.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/09/28/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2861221  bytes 663727208 (663.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3837929  bytes 754582031 (754.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5084190  bytes 807544542 (807.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5084190  bytes 807544542 (807.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/09/28/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2861293  bytes 663744472 (663.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3838025  bytes 754597852 (754.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5084327  bytes 807564448 (807.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5084327  bytes 807564448 (807.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/09/28/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2861408  bytes 663767713 (663.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3838158  bytes 754623320 (754.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5084475  bytes 807583929 (807.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5084475  bytes 807583929 (807.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/09/28/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2861477  bytes 663782823 (663.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3838248  bytes 754639757 (754.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5084608  bytes 807603405 (807.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5084608  bytes 807603405 (807.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/09/28/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2861531  bytes 663796359 (663.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3838327  bytes 754654134 (754.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5084724  bytes 807620779 (807.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5084724  bytes 807620779 (807.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/09/28/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2861592  bytes 663810571 (663.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3838407  bytes 754669141 (754.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5084847  bytes 807638529 (807.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5084847  bytes 807638529 (807.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/09/28/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2861700  bytes 663836063 (663.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3838542  bytes 754694917 (754.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5085092  bytes 807676086 (807.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5085092  bytes 807676086 (807.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/09/28/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2861876  bytes 663874061 (663.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3838741  bytes 754733942 (754.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5085388  bytes 807719187 (807.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5085388  bytes 807719187 (807.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/09/28/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2861949  bytes 663889504 (663.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3838841  bytes 754750286 (754.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5085531  bytes 807739374 (807.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5085531  bytes 807739374 (807.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/09/28/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2862014  bytes 663903474 (663.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3838925  bytes 754766339 (754.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5085656  bytes 807757278 (807.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5085656  bytes 807757278 (807.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/09/28/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2862230  bytes 663928742 (663.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3839312  bytes 755213080 (755.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5085881  bytes 808193357 (808.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5085881  bytes 808193357 (808.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/09/28/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2862292  bytes 663943337 (663.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3839398  bytes 755228189 (755.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5086010  bytes 808212789 (808.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5086010  bytes 808212789 (808.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/09/28/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2862396  bytes 663965651 (663.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3839531  bytes 755252244 (755.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5086161  bytes 808232442 (808.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5086161  bytes 808232442 (808.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/09/28/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2862457  bytes 663979982 (663.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3839616  bytes 755267242 (755.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5086299  bytes 808252369 (808.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5086299  bytes 808252369 (808.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/09/28/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2862511  bytes 663993498 (663.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3839691  bytes 755281271 (755.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5086418  bytes 808269745 (808.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5086418  bytes 808269745 (808.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/09/28/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2862566  bytes 664006810 (664.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3839769  bytes 755295578 (755.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5086538  bytes 808287339 (808.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5086538  bytes 808287339 (808.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/09/28/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2862631  bytes 664021493 (664.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3839856  bytes 755310624 (755.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5086673  bytes 808307141 (808.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5086673  bytes 808307141 (808.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/09/28/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2862711  bytes 664039639 (664.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3839959  bytes 755329794 (755.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5086811  bytes 808325901 (808.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5086811  bytes 808325901 (808.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/09/28/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2862798  bytes 664058908 (664.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3840070  bytes 755349357 (755.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5086952  bytes 808345994 (808.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5086952  bytes 808345994 (808.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/09/28/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2862860  bytes 664072724 (664.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3840153  bytes 755364902 (755.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5087076  bytes 808363784 (808.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5087076  bytes 808363784 (808.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/09/28/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2862916  bytes 664086280 (664.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3840230  bytes 755379223 (755.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5087188  bytes 808380962 (808.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5087188  bytes 808380962 (808.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/09/28/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2862985  bytes 664101213 (664.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3840319  bytes 755394491 (755.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5087322  bytes 808400712 (808.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5087322  bytes 808400712 (808.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/09/28/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2863066  bytes 664119273 (664.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3840423  bytes 755413662 (755.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5087449  bytes 808418885 (808.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5087449  bytes 808418885 (808.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/09/28/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2863151  bytes 664137954 (664.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3840530  bytes 755434157 (755.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5087582  bytes 808438529 (808.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5087582  bytes 808438529 (808.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/09/28/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2863205  bytes 664151226 (664.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3840607  bytes 755448483 (755.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5087708  bytes 808456460 (808.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5087708  bytes 808456460 (808.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/09/28/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2863270  bytes 664165244 (664.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3840694  bytes 755464480 (755.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5087833  bytes 808474376 (808.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5087833  bytes 808474376 (808.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/09/28/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2863340  bytes 664180291 (664.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3840785  bytes 755479867 (755.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5087968  bytes 808494120 (808.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5087968  bytes 808494120 (808.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/09/28/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2863422  bytes 664198421 (664.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3840887  bytes 755498968 (755.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5088107  bytes 808512916 (808.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5088107  bytes 808512916 (808.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/09/28/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2863503  bytes 664217240 (664.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3840995  bytes 755518385 (755.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5088244  bytes 808532830 (808.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5088244  bytes 808532830 (808.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/09/28/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2863558  bytes 664230520 (664.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3841075  bytes 755532886 (755.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5088367  bytes 808550606 (808.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5088367  bytes 808550606 (808.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/09/28/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2863610  bytes 664243688 (664.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3841151  bytes 755547139 (755.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5088478  bytes 808567732 (808.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5088478  bytes 808567732 (808.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/09/28/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2863668  bytes 664257931 (664.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3841234  bytes 755562043 (755.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5088601  bytes 808586828 (808.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5088601  bytes 808586828 (808.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/09/28/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2863749  bytes 664275901 (664.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3841336  bytes 755581709 (755.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5088727  bytes 808604937 (808.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5088727  bytes 808604937 (808.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/09/28/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2863833  bytes 664294808 (664.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3841445  bytes 755601192 (755.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5088865  bytes 808624923 (808.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5088865  bytes 808624923 (808.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/09/28/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2863893  bytes 664308846 (664.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3841527  bytes 755615895 (755.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5088993  bytes 808643006 (808.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5088993  bytes 808643006 (808.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/09/28/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2863945  bytes 664322030 (664.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3841604  bytes 755630238 (755.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5089112  bytes 808660548 (808.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5089112  bytes 808660548 (808.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/09/28/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2864008  bytes 664336810 (664.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3841692  bytes 755645453 (755.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5089239  bytes 808679910 (808.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5089239  bytes 808679910 (808.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/09/28/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2864064  bytes 664350266 (664.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3841773  bytes 755660280 (755.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5089357  bytes 808697426 (808.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5089357  bytes 808697426 (808.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/09/28/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2864173  bytes 664373287 (664.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3841900  bytes 755683784 (755.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5089506  bytes 808718114 (808.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5089506  bytes 808718114 (808.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/09/28/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2864230  bytes 664386671 (664.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3841979  bytes 755698175 (755.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5089633  bytes 808736099 (808.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5089633  bytes 808736099 (808.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/09/28/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2864287  bytes 664400477 (664.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3842061  bytes 755712882 (755.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5089749  bytes 808753547 (808.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5089749  bytes 808753547 (808.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/09/28/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2864351  bytes 664415117 (664.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3842150  bytes 755728179 (755.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5089873  bytes 808772717 (808.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5089873  bytes 808772717 (808.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/09/28/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2864409  bytes 664428553 (664.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3842228  bytes 755742532 (755.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5089989  bytes 808790091 (808.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5089989  bytes 808790091 (808.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/09/28/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2864518  bytes 664452192 (664.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3842360  bytes 755766950 (755.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5090140  bytes 808810984 (808.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5090140  bytes 808810984 (808.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/09/28/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2864575  bytes 664465756 (664.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3842440  bytes 755781503 (755.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5090264  bytes 808828812 (808.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5090264  bytes 808828812 (808.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/09/28/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2864632  bytes 664479208 (664.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3842518  bytes 755795864 (755.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5090381  bytes 808846250 (808.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5090381  bytes 808846250 (808.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/09/28/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2864694  bytes 664493647 (664.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3842605  bytes 755810896 (755.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5090512  bytes 808865762 (808.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5090512  bytes 808865762 (808.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/09/28/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2864748  bytes 664506919 (664.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3842680  bytes 755825027 (755.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5090621  bytes 808882618 (808.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5090621  bytes 808882618 (808.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/09/28/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2864855  bytes 664530121 (664.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3842816  bytes 755849374 (755.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5090769  bytes 808903293 (808.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5090769  bytes 808903293 (808.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/09/28/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2864923  bytes 664544211 (664.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3842903  bytes 755864383 (755.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5090902  bytes 808921744 (808.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5090902  bytes 808921744 (808.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/09/28/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2864977  bytes 664557402 (664.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3842978  bytes 755878509 (755.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5091016  bytes 808939072 (808.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5091016  bytes 808939072 (808.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/09/28/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2865042  bytes 664571970 (664.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3843067  bytes 755893679 (755.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5091137  bytes 808958054 (808.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5091137  bytes 808958054 (808.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/09/28/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2865097  bytes 664585294 (664.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3843145  bytes 755907996 (755.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5091254  bytes 808975480 (808.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5091254  bytes 808975480 (808.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2865202  bytes 664608233 (664.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3843278  bytes 755932030 (755.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5091411  bytes 808996767 (808.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5091411  bytes 808996767 (808.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2865261  bytes 664621701 (664.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3843354  bytes 755946287 (755.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5091537  bytes 809014830 (809.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5091537  bytes 809014830 (809.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2865318  bytes 664635097 (664.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3843433  bytes 755960778 (755.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5091648  bytes 809031826 (809.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5091648  bytes 809031826 (809.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
b'Error on request'
Token e243aac39fb012c084cfefeb2a6a3641 is maybe invalid 
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2865386  bytes 664649994 (664.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3843520  bytes 755975945 (755.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5091773  bytes 809051146 (809.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5091773  bytes 809051146 (809.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2865441  bytes 664663393 (664.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3843600  bytes 755990453 (755.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5091887  bytes 809068416 (809.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5091887  bytes 809068416 (809.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2865523  bytes 664682082 (664.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3843710  bytes 756010137 (756.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5092035  bytes 809088937 (809.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5092035  bytes 809088937 (809.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2865601  bytes 664699714 (664.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3843811  bytes 756028992 (756.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5092165  bytes 809107269 (809.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5092165  bytes 809107269 (809.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2865657  bytes 664713110 (664.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3843888  bytes 756043316 (756.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5092281  bytes 809124679 (809.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5092281  bytes 809124679 (809.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2865714  bytes 664727378 (664.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3843972  bytes 756058224 (756.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5092413  bytes 809144337 (809.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5092413  bytes 809144337 (809.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2865765  bytes 664740482 (664.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3844048  bytes 756072478 (756.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5092523  bytes 809161399 (809.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5092523  bytes 809161399 (809.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2865851  bytes 664759339 (664.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3844158  bytes 756092190 (756.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5092660  bytes 809181331 (809.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5092660  bytes 809181331 (809.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2865925  bytes 664776946 (664.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3844259  bytes 756110984 (756.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5092782  bytes 809199163 (809.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5092782  bytes 809199163 (809.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2865982  bytes 664790257 (664.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3844339  bytes 756125477 (756.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5092906  bytes 809217038 (809.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5092906  bytes 809217038 (809.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2866044  bytes 664804813 (664.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3844428  bytes 756140727 (756.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5093033  bytes 809236378 (809.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5093033  bytes 809236378 (809.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2866096  bytes 664817949 (664.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3844504  bytes 756154981 (756.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5093143  bytes 809253440 (809.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5093143  bytes 809253440 (809.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2866182  bytes 664836985 (664.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3844615  bytes 756174753 (756.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5093286  bytes 809273685 (809.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5093286  bytes 809273685 (809.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2866256  bytes 664854315 (664.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3844715  bytes 756193532 (756.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5093405  bytes 809291361 (809.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5093405  bytes 809291361 (809.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2866312  bytes 664867647 (664.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3844796  bytes 756208144 (756.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5093527  bytes 809309084 (809.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5093527  bytes 809309084 (809.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2866381  bytes 664882749 (664.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3844887  bytes 756223588 (756.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5093656  bytes 809328590 (809.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5093656  bytes 809328590 (809.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2866436  bytes 664896008 (664.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3844965  bytes 756237989 (756.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5093773  bytes 809345980 (809.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5093773  bytes 809345980 (809.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2866520  bytes 664914701 (664.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3845072  bytes 756257475 (756.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5093912  bytes 809365981 (809.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5093912  bytes 809365981 (809.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2866593  bytes 664932113 (664.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3845170  bytes 756276012 (756.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5094042  bytes 809384291 (809.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5094042  bytes 809384291 (809.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2866648  bytes 664945417 (664.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3845249  bytes 756290472 (756.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5094166  bytes 809402120 (809.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5094166  bytes 809402120 (809.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2866711  bytes 664960004 (664.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3845338  bytes 756305725 (756.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5094298  bytes 809421778 (809.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5094298  bytes 809421778 (809.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2866766  bytes 664973208 (664.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3845413  bytes 756319841 (756.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5094413  bytes 809439040 (809.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5094413  bytes 809439040 (809.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2866827  bytes 664987615 (664.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3845500  bytes 756335046 (756.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5094548  bytes 809458680 (809.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5094548  bytes 809458680 (809.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2866927  bytes 665009653 (665.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3845620  bytes 756358000 (756.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5094691  bytes 809477816 (809.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5094691  bytes 809477816 (809.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2866983  bytes 665023024 (665.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3845699  bytes 756372415 (756.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5094818  bytes 809495801 (809.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5094818  bytes 809495801 (809.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2867048  bytes 665037840 (665.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3845788  bytes 756387629 (756.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5094952  bytes 809515609 (809.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5094952  bytes 809515609 (809.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2867103  bytes 665051100 (665.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3845866  bytes 756402023 (756.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5095071  bytes 809533115 (809.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5095071  bytes 809533115 (809.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2867163  bytes 665065263 (665.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3845950  bytes 756416845 (756.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5095196  bytes 809552161 (809.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5095196  bytes 809552161 (809.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2867259  bytes 665086969 (665.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3846069  bytes 756439872 (756.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5095343  bytes 809571544 (809.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5095343  bytes 809571544 (809.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2867319  bytes 665100481 (665.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3846152  bytes 756454615 (756.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5095471  bytes 809589521 (809.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5095471  bytes 809589521 (809.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2867385  bytes 665115310 (665.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3846241  bytes 756469893 (756.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5095601  bytes 809609103 (809.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5095601  bytes 809609103 (809.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2867436  bytes 665128306 (665.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3846315  bytes 756484038 (756.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5095715  bytes 809626349 (809.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5095715  bytes 809626349 (809.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2867498  bytes 665142836 (665.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3846400  bytes 756498982 (756.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5095839  bytes 809645173 (809.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5095839  bytes 809645173 (809.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2867596  bytes 665164802 (665.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3846529  bytes 756522658 (756.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5095996  bytes 809665138 (809.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5095996  bytes 809665138 (809.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2867652  bytes 665178114 (665.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3846611  bytes 756537312 (756.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5096126  bytes 809683409 (809.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5096126  bytes 809683409 (809.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2867716  bytes 665192818 (665.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3846699  bytes 756552464 (756.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5096256  bytes 809702893 (809.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5096256  bytes 809702893 (809.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2867766  bytes 665205830 (665.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3846770  bytes 756566280 (756.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5096366  bytes 809719777 (809.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5096366  bytes 809719777 (809.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2867825  bytes 665220093 (665.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3846853  bytes 756581069 (756.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5096493  bytes 809738963 (809.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5096493  bytes 809738963 (809.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2867925  bytes 665242000 (665.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3846982  bytes 756604850 (756.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5096634  bytes 809757961 (809.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5096634  bytes 809757961 (809.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2867979  bytes 665255247 (665.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3847061  bytes 756619297 (756.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5096756  bytes 809775662 (809.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5096756  bytes 809775662 (809.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2868047  bytes 665270278 (665.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3847152  bytes 756634714 (756.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5096894  bytes 809795702 (809.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5096894  bytes 809795702 (809.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2868099  bytes 665283437 (665.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3847228  bytes 756648891 (756.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5097015  bytes 809813358 (809.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5097015  bytes 809813358 (809.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2868159  bytes 665297744 (665.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3847315  bytes 756664032 (756.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5097145  bytes 809832700 (809.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5097145  bytes 809832700 (809.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2868237  bytes 665315376 (665.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3847414  bytes 756682855 (756.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5097277  bytes 809851149 (809.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5097277  bytes 809851149 (809.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2868308  bytes 665332550 (665.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3847512  bytes 756701442 (756.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5097396  bytes 809868809 (809.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5097396  bytes 809868809 (809.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2868376  bytes 665347474 (665.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3847602  bytes 756716810 (756.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5097536  bytes 809888945 (809.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5097536  bytes 809888945 (809.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2868432  bytes 665360944 (665.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3847681  bytes 756731348 (756.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5097648  bytes 809906149 (809.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5097648  bytes 809906149 (809.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2868492  bytes 665375299 (665.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3847768  bytes 756746489 (756.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5097774  bytes 809925283 (809.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5097774  bytes 809925283 (809.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2868572  bytes 665393164 (665.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3847870  bytes 756765519 (756.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5097901  bytes 809943456 (809.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5097901  bytes 809943456 (809.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2868646  bytes 665410620 (665.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3847970  bytes 756784360 (756.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5098025  bytes 809961454 (809.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5098025  bytes 809961454 (809.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2868711  bytes 665425400 (665.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3848061  bytes 756799766 (756.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5098162  bytes 809981341 (809.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5098162  bytes 809981341 (809.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2868764  bytes 665438516 (665.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3848137  bytes 756814040 (756.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5098272  bytes 809998415 (809.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5098272  bytes 809998415 (809.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2868822  bytes 665452743 (665.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3848220  bytes 756828817 (756.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5098397  bytes 810017473 (810.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5098397  bytes 810017473 (810.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2868901  bytes 665470537 (665.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3848325  bytes 756848094 (756.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5098528  bytes 810035878 (810.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5098528  bytes 810035878 (810.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2868978  bytes 665488201 (665.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3848424  bytes 756866773 (756.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5098646  bytes 810053502 (810.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5098646  bytes 810053502 (810.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2869041  bytes 665502853 (665.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3848513  bytes 756882071 (756.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5098780  bytes 810073233 (810.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5098780  bytes 810073233 (810.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2869096  bytes 665516259 (665.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3848590  bytes 756896353 (756.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5098895  bytes 810090613 (810.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5098895  bytes 810090613 (810.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2869157  bytes 665530677 (665.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3848676  bytes 756911394 (756.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5099013  bytes 810109353 (810.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5099013  bytes 810109353 (810.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2869234  bytes 665548325 (665.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3848779  bytes 756930544 (756.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5099145  bytes 810127810 (810.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5099145  bytes 810127810 (810.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2869306  bytes 665565563 (665.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3848876  bytes 756949012 (756.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5099261  bytes 810145330 (810.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5099261  bytes 810145330 (810.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2869369  bytes 665580042 (665.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3848964  bytes 756964174 (756.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5099398  bytes 810165275 (810.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5099398  bytes 810165275 (810.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2869424  bytes 665593468 (665.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3849045  bytes 756978779 (756.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5099511  bytes 810182567 (810.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5099511  bytes 810182567 (810.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2869484  bytes 665607783 (665.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3849130  bytes 756993808 (756.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5099636  bytes 810201625 (810.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5099636  bytes 810201625 (810.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2869543  bytes 665621347 (665.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3849212  bytes 757008598 (757.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5099760  bytes 810219490 (810.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5099760  bytes 810219490 (810.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2869642  bytes 665643356 (665.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3849335  bytes 757031737 (757.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5099903  bytes 810238652 (810.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5099903  bytes 810238652 (810.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2869715  bytes 665658545 (665.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3849430  bytes 757047432 (757.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5100045  bytes 810258856 (810.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5100045  bytes 810258856 (810.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2869768  bytes 665671721 (665.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3849505  bytes 757061612 (757.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5100153  bytes 810275826 (810.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5100153  bytes 810275826 (810.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2869828  bytes 665686028 (665.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3849591  bytes 757076615 (757.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5100270  bytes 810294468 (810.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5100270  bytes 810294468 (810.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2869882  bytes 665699288 (665.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3849670  bytes 757091039 (757.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5100385  bytes 810311826 (810.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5100385  bytes 810311826 (810.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2869979  bytes 665721115 (665.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3849789  bytes 757114004 (757.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5100515  bytes 810330083 (810.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5100515  bytes 810330083 (810.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2870048  bytes 665736130 (665.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3849884  bytes 757129689 (757.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5100661  bytes 810350567 (810.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5100661  bytes 810350567 (810.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
b'Error on request'
Token e243aac39fb012c084cfefeb2a6a3641 is maybe invalid 
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2870102  bytes 665749345 (665.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3849961  bytes 757143981 (757.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5100774  bytes 810367821 (810.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5100774  bytes 810367821 (810.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2870167  bytes 665764246 (665.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3850048  bytes 757159124 (757.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5100898  bytes 810386873 (810.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5100898  bytes 810386873 (810.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2870226  bytes 665777781 (665.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3850124  bytes 757173373 (757.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5101005  bytes 810403647 (810.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5101005  bytes 810403647 (810.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2870322  bytes 665799511 (665.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3850249  bytes 757196757 (757.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5101147  bytes 810422794 (810.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5101147  bytes 810422794 (810.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2870387  bytes 665814142 (665.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3850339  bytes 757212140 (757.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5101281  bytes 810442655 (810.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5101281  bytes 810442655 (810.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2870441  bytes 665827382 (665.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3850411  bytes 757226098 (757.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5101391  bytes 810459575 (810.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5101391  bytes 810459575 (810.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
b'Error on request'
Token e243aac39fb012c084cfefeb2a6a3641 is maybe invalid 
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2870505  bytes 665842002 (665.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3850496  bytes 757241133 (757.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5101517  bytes 810478771 (810.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5101517  bytes 810478771 (810.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2870557  bytes 665855094 (665.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3850571  bytes 757255317 (757.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5101631  bytes 810496017 (810.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5101631  bytes 810496017 (810.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2870658  bytes 665877252 (665.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3850701  bytes 757279203 (757.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5101778  bytes 810515461 (810.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5101778  bytes 810515461 (810.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2870728  bytes 665892375 (665.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3850789  bytes 757294474 (757.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5101912  bytes 810535249 (810.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5101912  bytes 810535249 (810.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2870782  bytes 665905607 (665.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3850867  bytes 757308900 (757.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5102026  bytes 810552495 (810.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5102026  bytes 810552495 (810.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2870808  bytes 665911274 (665.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3850906  bytes 757314065 (757.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5102052  bytes 810555443 (810.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5102052  bytes 810555443 (810.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2870828  bytes 665915902 (665.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3850938  bytes 757318655 (757.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5102072  bytes 810556863 (810.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5102072  bytes 810556863 (810.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2870866  bytes 665924522 (665.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3850987  bytes 757327278 (757.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5102109  bytes 810559362 (810.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5102109  bytes 810559362 (810.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2870915  bytes 665934839 (665.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3851060  bytes 757338164 (757.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5102149  bytes 810563356 (810.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5102149  bytes 810563356 (810.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2870933  bytes 665939391 (665.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3851089  bytes 757342600 (757.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5102176  bytes 810565155 (810.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5102176  bytes 810565155 (810.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2870959  bytes 665945070 (665.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3851128  bytes 757347800 (757.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5102202  bytes 810568091 (810.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5102202  bytes 810568091 (810.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2870978  bytes 665949693 (665.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3851158  bytes 757352288 (757.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5102220  bytes 810569393 (810.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5102220  bytes 810569393 (810.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2871024  bytes 665958990 (665.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3851213  bytes 757361547 (757.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5102258  bytes 810571986 (810.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5102258  bytes 810571986 (810.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2871067  bytes 665968695 (665.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3851281  bytes 757372002 (757.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5102301  bytes 810576118 (810.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5102301  bytes 810576118 (810.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2871085  bytes 665973191 (665.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3851311  bytes 757376483 (757.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5102326  bytes 810577776 (810.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5102326  bytes 810577776 (810.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2871113  bytes 665979140 (665.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3851351  bytes 757381804 (757.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5102356  bytes 810581018 (810.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5102356  bytes 810581018 (810.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2871131  bytes 665983743 (665.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3851379  bytes 757386185 (757.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5102372  bytes 810582170 (810.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5102372  bytes 810582170 (810.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2871172  bytes 665992713 (665.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3851433  bytes 757395332 (757.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5102408  bytes 810584612 (810.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5102408  bytes 810584612 (810.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2871240  bytes 666007581 (666.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3851528  bytes 757410957 (757.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5102503  bytes 810597281 (810.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5102503  bytes 810597281 (810.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2871294  bytes 666020765 (666.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3851610  bytes 757425563 (757.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5102624  bytes 810614930 (810.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5102624  bytes 810614930 (810.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2871357  bytes 666035196 (666.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3851694  bytes 757440502 (757.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5102747  bytes 810633944 (810.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5102747  bytes 810633944 (810.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2871412  bytes 666048420 (666.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3851771  bytes 757454838 (757.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5102855  bytes 810650878 (810.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5102855  bytes 810650878 (810.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2871494  bytes 666066296 (666.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3851873  bytes 757473903 (757.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5102985  bytes 810669207 (810.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5102985  bytes 810669207 (810.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2871574  bytes 666084978 (666.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3851984  bytes 757493542 (757.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5103134  bytes 810690031 (810.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5103134  bytes 810690031 (810.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2871631  bytes 666098449 (666.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3852063  bytes 757508021 (757.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5103251  bytes 810707471 (810.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5103251  bytes 810707471 (810.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2871692  bytes 666112824 (666.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3852149  bytes 757523052 (757.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5103370  bytes 810726253 (810.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5103370  bytes 810726253 (810.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2871744  bytes 666125928 (666.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3852226  bytes 757537364 (757.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5103489  bytes 810743829 (810.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5103489  bytes 810743829 (810.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2871823  bytes 666143801 (666.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3852330  bytes 757556550 (757.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5103619  bytes 810762204 (810.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5103619  bytes 810762204 (810.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2871910  bytes 666162827 (666.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3852441  bytes 757576177 (757.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5103757  bytes 810782308 (810.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5103757  bytes 810782308 (810.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2871966  bytes 666176159 (666.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3852524  bytes 757590885 (757.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5103875  bytes 810799824 (810.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5103875  bytes 810799824 (810.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2872026  bytes 666190414 (666.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3852609  bytes 757605774 (757.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5103998  bytes 810818814 (810.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5103998  bytes 810818814 (810.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2872081  bytes 666203733 (666.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3852685  bytes 757620011 (757.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5104112  bytes 810836084 (810.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5104112  bytes 810836084 (810.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2872138  bytes 666217336 (666.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3852766  bytes 757634770 (757.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5104229  bytes 810853560 (810.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5104229  bytes 810853560 (810.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2872241  bytes 666240371 (666.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3852894  bytes 757658371 (757.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5104374  bytes 810873992 (810.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5104374  bytes 810873992 (810.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2872302  bytes 666254007 (666.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3852981  bytes 757673431 (757.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5104504  bytes 810892287 (810.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5104504  bytes 810892287 (810.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2872369  bytes 666268662 (666.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3853070  bytes 757688852 (757.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5104629  bytes 810911381 (810.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5104629  bytes 810911381 (810.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2872421  bytes 666281790 (666.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3853143  bytes 757702872 (757.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5104735  bytes 810928057 (810.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5104735  bytes 810928057 (810.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2872474  bytes 666295010 (666.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3853222  bytes 757717300 (757.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5104851  bytes 810945431 (810.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5104851  bytes 810945431 (810.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2872580  bytes 666318114 (666.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3853359  bytes 757741700 (757.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5105012  bytes 810966985 (810.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5105012  bytes 810966985 (810.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2872642  bytes 666331700 (666.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3853441  bytes 757756388 (757.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5105138  bytes 810985061 (810.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5105138  bytes 810985061 (810.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2872702  bytes 666346023 (666.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3853523  bytes 757771074 (757.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5105252  bytes 811003377 (811.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5105252  bytes 811003377 (811.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2872755  bytes 666359238 (666.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3853599  bytes 757785322 (757.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5105366  bytes 811020623 (811.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5105366  bytes 811020623 (811.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2872809  bytes 666372478 (666.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3853677  bytes 757799683 (757.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5105483  bytes 811038095 (811.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5105483  bytes 811038095 (811.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2872919  bytes 666395988 (666.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3853827  bytes 757825286 (757.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5105647  bytes 811059848 (811.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5105647  bytes 811059848 (811.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2872978  bytes 666409520 (666.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3853907  bytes 757839823 (757.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5105769  bytes 811077571 (811.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5105769  bytes 811077571 (811.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2873037  bytes 666423755 (666.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3853991  bytes 757854722 (757.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5105889  bytes 811096405 (811.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5105889  bytes 811096405 (811.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2873092  bytes 666437059 (666.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3854069  bytes 757869080 (757.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5106000  bytes 811113495 (811.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5106000  bytes 811113495 (811.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2873152  bytes 666450662 (666.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3854152  bytes 757883832 (757.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5106114  bytes 811130765 (811.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5106114  bytes 811130765 (811.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2873238  bytes 666469506 (666.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3854263  bytes 757903605 (757.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5106261  bytes 811151434 (811.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5106261  bytes 811151434 (811.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2873312  bytes 666487002 (666.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3854362  bytes 757922224 (757.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5106377  bytes 811168938 (811.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5106377  bytes 811168938 (811.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2873377  bytes 666501673 (666.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3854449  bytes 757937369 (757.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5106511  bytes 811188563 (811.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5106511  bytes 811188563 (811.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2873429  bytes 666514741 (666.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3854525  bytes 757951595 (757.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5106623  bytes 811205705 (811.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5106623  bytes 811205705 (811.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2873484  bytes 666528037 (666.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3854605  bytes 757966141 (757.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5106735  bytes 811222871 (811.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5106735  bytes 811222871 (811.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2873576  bytes 666547431 (666.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3854717  bytes 757986070 (757.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5106880  bytes 811243362 (811.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5106880  bytes 811243362 (811.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2873655  bytes 666565135 (666.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3854816  bytes 758004681 (758.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5107008  bytes 811261630 (811.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5107008  bytes 811261630 (811.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2873723  bytes 666579981 (666.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3854907  bytes 758019977 (758.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5107137  bytes 811280943 (811.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5107137  bytes 811280943 (811.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2873781  bytes 666593421 (666.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3854985  bytes 758034403 (758.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5107251  bytes 811298189 (811.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5107251  bytes 811298189 (811.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2873837  bytes 666606904 (666.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3855062  bytes 758048694 (758.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5107367  bytes 811315563 (811.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5107367  bytes 811315563 (811.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2873928  bytes 666626190 (666.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3855172  bytes 758068475 (758.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5107513  bytes 811336152 (811.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5107513  bytes 811336152 (811.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2874005  bytes 666643882 (666.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3855274  bytes 758087388 (758.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5107636  bytes 811354082 (811.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5107636  bytes 811354082 (811.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2874072  bytes 666658589 (666.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3855361  bytes 758102489 (758.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5107772  bytes 811373811 (811.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5107772  bytes 811373811 (811.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
b'Error on request'
Token e243aac39fb012c084cfefeb2a6a3641 is maybe invalid 
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2874127  bytes 666671840 (666.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3855436  bytes 758116717 (758.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5107880  bytes 811390745 (811.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5107880  bytes 811390745 (811.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2874181  bytes 666685136 (666.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3855514  bytes 758131103 (758.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5107996  bytes 811408119 (811.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5107996  bytes 811408119 (811.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2874271  bytes 666704326 (666.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3855627  bytes 758151122 (758.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5108141  bytes 811428667 (811.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5108141  bytes 811428667 (811.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2874343  bytes 666721540 (666.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3855725  bytes 758169701 (758.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5108263  bytes 811446499 (811.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5108263  bytes 811446499 (811.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2874410  bytes 666736354 (666.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3855813  bytes 758184895 (758.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5108393  bytes 811465932 (811.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5108393  bytes 811465932 (811.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2874464  bytes 666749514 (666.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3855890  bytes 758199191 (758.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5108505  bytes 811483110 (811.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5108505  bytes 811483110 (811.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
b'Error on request'
Token e243aac39fb012c084cfefeb2a6a3641 is maybe invalid 
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2874515  bytes 666762581 (666.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3855966  bytes 758213433 (758.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5108615  bytes 811500148 (811.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5108615  bytes 811500148 (811.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2874608  bytes 666782396 (666.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3856087  bytes 758234089 (758.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5108762  bytes 811520789 (811.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5108762  bytes 811520789 (811.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2874687  bytes 666800183 (666.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3856190  bytes 758253019 (758.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5108895  bytes 811539353 (811.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5108895  bytes 811539353 (811.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2874750  bytes 666814874 (666.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3856281  bytes 758268391 (758.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5109030  bytes 811558993 (811.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5109030  bytes 811558993 (811.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2874804  bytes 666828197 (666.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3856359  bytes 758282803 (758.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5109139  bytes 811576015 (811.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5109139  bytes 811576015 (811.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2874860  bytes 666841577 (666.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3856437  bytes 758297176 (758.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5109251  bytes 811593157 (811.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5109251  bytes 811593157 (811.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2874927  bytes 666856612 (666.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3856526  bytes 758312544 (758.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5109385  bytes 811612888 (811.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5109385  bytes 811612888 (811.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2875028  bytes 666878750 (666.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3856650  bytes 758335781 (758.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5109515  bytes 811631240 (811.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5109515  bytes 811631240 (811.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2875099  bytes 666893625 (666.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3856741  bytes 758351694 (758.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5109645  bytes 811650775 (811.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5109645  bytes 811650775 (811.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2875155  bytes 666906969 (666.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3856818  bytes 758365974 (758.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5109764  bytes 811668317 (811.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5109764  bytes 811668317 (811.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2875208  bytes 666920113 (666.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3856889  bytes 758379826 (758.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5109866  bytes 811684785 (811.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5109866  bytes 811684785 (811.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2875271  bytes 666934716 (666.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3856976  bytes 758394963 (758.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5109994  bytes 811704165 (811.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5109994  bytes 811704165 (811.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2875370  bytes 666956601 (666.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3857103  bytes 758418518 (758.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5110136  bytes 811723287 (811.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5110136  bytes 811723287 (811.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2875434  bytes 666971032 (666.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3857192  bytes 758433759 (758.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5110271  bytes 811743081 (811.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5110271  bytes 811743081 (811.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2875484  bytes 666984016 (666.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3857265  bytes 758447840 (758.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5110371  bytes 811759445 (811.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5110371  bytes 811759445 (811.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2875539  bytes 666997391 (666.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3857345  bytes 758462357 (758.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5110485  bytes 811776727 (811.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5110485  bytes 811776727 (811.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2875605  bytes 667012139 (667.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3857434  bytes 758477563 (758.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5110613  bytes 811796165 (811.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5110613  bytes 811796165 (811.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2875704  bytes 667034125 (667.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3857562  bytes 758501325 (758.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5110756  bytes 811815401 (811.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5110756  bytes 811815401 (811.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2875766  bytes 667048523 (667.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3857646  bytes 758516243 (758.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5110883  bytes 811834663 (811.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5110883  bytes 811834663 (811.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2875821  bytes 667061871 (667.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3857724  bytes 758530629 (758.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5110997  bytes 811851933 (811.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5110997  bytes 811851933 (811.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2875874  bytes 667075122 (667.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3857802  bytes 758545074 (758.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5111107  bytes 811869007 (811.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5111107  bytes 811869007 (811.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2875937  bytes 667089598 (667.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3857889  bytes 758560176 (758.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5111237  bytes 811888549 (811.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5111237  bytes 811888549 (811.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2876014  bytes 667107141 (667.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3857986  bytes 758578834 (758.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5111370  bytes 811907060 (811.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5111370  bytes 811907060 (811.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2876097  bytes 667125931 (667.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3858095  bytes 758598301 (758.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5111502  bytes 811926718 (811.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5111502  bytes 811926718 (811.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2876151  bytes 667139203 (667.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3858174  bytes 758612701 (758.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5111623  bytes 811944390 (811.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5111623  bytes 811944390 (811.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2876208  bytes 667152555 (667.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3858254  bytes 758627703 (758.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5111733  bytes 811961428 (811.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5111733  bytes 811961428 (811.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2876273  bytes 667167331 (667.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3858344  bytes 758643039 (758.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5111862  bytes 811980872 (811.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5111862  bytes 811980872 (811.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2876352  bytes 667185033 (667.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3858445  bytes 758662100 (758.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5111987  bytes 811998929 (811.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5111987  bytes 811998929 (811.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2876438  bytes 667203889 (667.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3858554  bytes 758681617 (758.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5112118  bytes 812018505 (812.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5112118  bytes 812018505 (812.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2876494  bytes 667217177 (667.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3858634  bytes 758696091 (758.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5112236  bytes 812035997 (812.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5112236  bytes 812035997 (812.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2876548  bytes 667230441 (667.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3858710  bytes 758710421 (758.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5112350  bytes 812053267 (812.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5112350  bytes 812053267 (812.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2876611  bytes 667245076 (667.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3858799  bytes 758725702 (758.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5112478  bytes 812072659 (812.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5112478  bytes 812072659 (812.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2876690  bytes 667262782 (667.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3858900  bytes 758744707 (758.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5112605  bytes 812090796 (812.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5112605  bytes 812090796 (812.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2876778  bytes 667281824 (667.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3859015  bytes 758764609 (758.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5112746  bytes 812111040 (812.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5112746  bytes 812111040 (812.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2876833  bytes 667295096 (667.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3859094  bytes 758779040 (758.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5112869  bytes 812128791 (812.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5112869  bytes 812128791 (812.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2876882  bytes 667308032 (667.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3859168  bytes 758793113 (758.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5112977  bytes 812145725 (812.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5112977  bytes 812145725 (812.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2876947  bytes 667322826 (667.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3859259  bytes 758808516 (758.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5113104  bytes 812165089 (812.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5113104  bytes 812165089 (812.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2877030  bytes 667340746 (667.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3859359  bytes 758827444 (758.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5113233  bytes 812183328 (812.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5113233  bytes 812183328 (812.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2877115  bytes 667359443 (667.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3859466  bytes 758846938 (758.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5113362  bytes 812202834 (812.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5113362  bytes 812202834 (812.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2877173  bytes 667373005 (667.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3859546  bytes 758861502 (758.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5113486  bytes 812220721 (812.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5113486  bytes 812220721 (812.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2877225  bytes 667386189 (667.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3859624  bytes 758875928 (758.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5113600  bytes 812237967 (812.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5113600  bytes 812237967 (812.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2877294  bytes 667401170 (667.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3859716  bytes 758891393 (758.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5113731  bytes 812257597 (812.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5113731  bytes 812257597 (812.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2877371  bytes 667418840 (667.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3859821  bytes 758911182 (758.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5113856  bytes 812275630 (812.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5113856  bytes 812275630 (812.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2877457  bytes 667437820 (667.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3859929  bytes 758930541 (758.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5113988  bytes 812295246 (812.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5113988  bytes 812295246 (812.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
b'Error on request'
Token e243aac39fb012c084cfefeb2a6a3641 is maybe invalid 
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2877514  bytes 667451278 (667.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3860008  bytes 758945040 (758.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5114103  bytes 812312618 (812.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5114103  bytes 812312618 (812.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2877570  bytes 667464578 (667.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3860084  bytes 758959334 (758.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5114211  bytes 812329552 (812.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5114211  bytes 812329552 (812.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2877638  bytes 667479385 (667.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3860174  bytes 758974661 (758.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5114340  bytes 812349020 (812.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5114340  bytes 812349020 (812.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2877693  bytes 667492665 (667.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3860250  bytes 758989095 (758.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5114449  bytes 812365927 (812.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5114449  bytes 812365927 (812.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2877799  bytes 667515813 (667.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3860379  bytes 759012819 (759.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5114588  bytes 812386121 (812.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5114588  bytes 812386121 (812.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2877859  bytes 667529400 (667.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3860465  bytes 759027744 (759.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5114721  bytes 812404670 (812.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5114721  bytes 812404670 (812.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2877916  bytes 667542936 (667.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3860542  bytes 759042104 (759.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5114834  bytes 812421864 (812.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5114834  bytes 812421864 (812.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2877979  bytes 667557675 (667.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3860629  bytes 759057301 (759.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5114960  bytes 812440962 (812.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5114960  bytes 812440962 (812.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2878035  bytes 667571315 (667.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3860708  bytes 759072330 (759.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5115073  bytes 812458216 (812.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5115073  bytes 812458216 (812.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2878137  bytes 667594084 (667.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3860852  bytes 759097909 (759.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5115223  bytes 812478958 (812.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5115223  bytes 812478958 (812.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2878192  bytes 667607323 (667.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3860929  bytes 759112220 (759.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5115341  bytes 812496521 (812.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5115341  bytes 812496521 (812.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2878248  bytes 667620730 (667.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3861007  bytes 759126665 (759.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5115455  bytes 812513849 (812.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5115455  bytes 812513849 (812.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2878315  bytes 667635713 (667.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3861097  bytes 759142107 (759.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5115586  bytes 812533419 (812.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5115586  bytes 812533419 (812.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2878375  bytes 667649321 (667.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3861176  bytes 759156563 (759.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5115697  bytes 812550569 (812.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5115697  bytes 812550569 (812.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2878494  bytes 667675185 (667.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3861317  bytes 759181510 (759.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5115849  bytes 812571415 (812.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5115849  bytes 812571415 (812.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2878570  bytes 667690396 (667.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3861414  bytes 759197391 (759.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5115980  bytes 812589816 (812.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5115980  bytes 812589816 (812.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2878629  bytes 667703896 (667.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3861493  bytes 759211819 (759.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5116105  bytes 812607709 (812.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5116105  bytes 812607709 (812.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2878692  bytes 667718344 (667.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3861581  bytes 759227035 (759.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5116234  bytes 812627175 (812.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5116234  bytes 812627175 (812.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2878749  bytes 667731748 (667.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3861662  bytes 759241575 (759.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5116349  bytes 812644533 (812.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5116349  bytes 812644533 (812.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2878832  bytes 667750395 (667.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3861770  bytes 759261212 (759.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5116489  bytes 812664601 (812.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5116489  bytes 812664601 (812.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2878907  bytes 667768101 (667.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3861872  bytes 759280130 (759.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5116616  bytes 812682825 (812.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5116616  bytes 812682825 (812.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2878964  bytes 667781589 (667.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3861952  bytes 759294679 (759.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5116736  bytes 812700458 (812.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5116736  bytes 812700458 (812.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2879034  bytes 667796505 (667.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3862042  bytes 759309899 (759.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5116864  bytes 812719814 (812.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5116864  bytes 812719814 (812.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2879090  bytes 667809944 (667.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3862123  bytes 759324477 (759.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5116979  bytes 812737172 (812.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5116979  bytes 812737172 (812.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2879174  bytes 667828785 (667.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3862231  bytes 759344085 (759.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5117117  bytes 812757121 (812.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5117117  bytes 812757121 (812.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2879248  bytes 667846183 (667.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3862328  bytes 759362646 (759.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5117235  bytes 812774745 (812.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5117235  bytes 812774745 (812.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2879305  bytes 667859638 (667.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3862409  bytes 759377277 (759.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5117356  bytes 812792499 (812.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5117356  bytes 812792499 (812.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2879369  bytes 667874597 (667.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3862500  bytes 759393211 (759.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5117484  bytes 812811855 (812.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5117484  bytes 812811855 (812.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2879425  bytes 667888056 (667.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3862578  bytes 759407664 (759.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5117599  bytes 812829189 (812.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5117599  bytes 812829189 (812.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2879517  bytes 667907357 (667.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3862691  bytes 759427622 (759.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5117743  bytes 812849473 (812.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5117743  bytes 812849473 (812.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2879593  bytes 667924965 (667.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3862795  bytes 759446734 (759.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5117866  bytes 812867357 (812.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5117866  bytes 812867357 (812.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2879658  bytes 667938797 (667.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3862878  bytes 759461438 (759.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5117992  bytes 812885325 (812.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5117992  bytes 812885325 (812.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2879723  bytes 667953669 (667.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3862969  bytes 759476888 (759.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5118122  bytes 812904843 (812.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5118122  bytes 812904843 (812.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2879780  bytes 667967149 (667.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3863049  bytes 759491458 (759.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5118232  bytes 812921881 (812.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5118232  bytes 812921881 (812.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2879870  bytes 667986216 (667.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3863157  bytes 759511436 (759.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5118370  bytes 812941890 (812.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5118370  bytes 812941890 (812.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2879944  bytes 668003628 (668.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3863260  bytes 759530391 (759.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5118493  bytes 812959898 (812.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5118493  bytes 812959898 (812.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2880005  bytes 668017267 (668.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3863344  bytes 759545140 (759.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5118613  bytes 812977531 (812.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5118613  bytes 812977531 (812.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2880070  bytes 668031992 (668.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3863431  bytes 759560287 (759.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5118744  bytes 812997125 (812.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5118744  bytes 812997125 (812.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2880122  bytes 668045203 (668.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3863507  bytes 759574552 (759.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5118854  bytes 813014163 (813.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5118854  bytes 813014163 (813.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2880210  bytes 668064448 (668.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3863618  bytes 759594378 (759.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5118996  bytes 813034380 (813.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5118996  bytes 813034380 (813.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2880285  bytes 668081917 (668.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3863715  bytes 759612846 (759.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5119117  bytes 813052006 (813.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5119117  bytes 813052006 (813.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2880343  bytes 668095352 (668.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3863800  bytes 759627725 (759.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5119246  bytes 813070307 (813.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5119246  bytes 813070307 (813.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2880410  bytes 668110066 (668.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3863892  bytes 759643195 (759.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5119383  bytes 813090201 (813.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5119383  bytes 813090201 (813.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2880461  bytes 668123082 (668.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3863967  bytes 759657383 (759.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5119502  bytes 813107707 (813.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5119502  bytes 813107707 (813.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2880527  bytes 668138101 (668.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3864053  bytes 759672566 (759.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5119628  bytes 813126762 (813.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5119628  bytes 813126762 (813.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2880631  bytes 668160371 (668.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3864175  bytes 759695572 (759.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5119770  bytes 813145810 (813.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5119770  bytes 813145810 (813.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2880694  bytes 668174154 (668.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3864261  bytes 759710509 (759.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5119907  bytes 813164480 (813.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5119907  bytes 813164480 (813.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2880763  bytes 668189354 (668.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3864348  bytes 759725639 (759.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5120037  bytes 813183964 (813.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5120037  bytes 813183964 (813.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2880816  bytes 668202534 (668.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3864423  bytes 759739771 (759.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5120149  bytes 813200952 (813.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5120149  bytes 813200952 (813.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2880881  bytes 668217205 (668.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3864509  bytes 759754830 (759.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5120273  bytes 813220018 (813.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5120273  bytes 813220018 (813.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2880977  bytes 668238890 (668.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3864630  bytes 759777981 (759.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5120417  bytes 813239270 (813.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5120417  bytes 813239270 (813.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2881036  bytes 668252473 (668.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3864708  bytes 759792322 (759.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5120545  bytes 813257380 (813.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5120545  bytes 813257380 (813.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2881103  bytes 668267324 (668.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3864796  bytes 759807533 (759.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5120677  bytes 813277026 (813.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5120677  bytes 813277026 (813.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2881165  bytes 668281186 (668.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3864876  bytes 759822129 (759.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5120794  bytes 813294428 (813.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5120794  bytes 813294428 (813.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2881229  bytes 668295737 (668.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3864962  bytes 759837077 (759.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5120925  bytes 813313858 (813.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5120925  bytes 813313858 (813.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2881326  bytes 668317624 (668.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3865088  bytes 759860541 (759.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5121063  bytes 813332736 (813.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5121063  bytes 813332736 (813.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2881384  bytes 668331108 (668.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3865166  bytes 759874968 (759.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5121174  bytes 813349826 (813.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5121174  bytes 813349826 (813.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2881453  bytes 668346180 (668.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3865257  bytes 759890363 (759.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5121323  bytes 813370476 (813.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5121323  bytes 813370476 (813.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2881506  bytes 668359344 (668.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3865333  bytes 759904590 (759.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5121433  bytes 813387514 (813.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5121433  bytes 813387514 (813.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2881564  bytes 668373487 (668.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3865418  bytes 759919552 (759.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5121553  bytes 813406348 (813.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5121553  bytes 813406348 (813.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2881648  bytes 668391479 (668.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3865524  bytes 759939166 (759.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5121697  bytes 813425444 (813.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5121697  bytes 813425444 (813.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2881729  bytes 668409406 (668.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3865621  bytes 759957765 (759.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5121823  bytes 813443468 (813.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5121823  bytes 813443468 (813.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2881795  bytes 668424142 (668.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3865708  bytes 759972832 (759.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5121965  bytes 813463626 (813.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5121965  bytes 813463626 (813.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2881854  bytes 668437610 (668.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3865787  bytes 759987241 (759.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5122090  bytes 813481468 (813.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5122090  bytes 813481468 (813.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2881920  bytes 668452209 (668.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3865872  bytes 760002195 (760.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5122212  bytes 813500370 (813.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5122212  bytes 813500370 (813.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2882007  bytes 668470579 (668.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3865979  bytes 760021661 (760.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5122352  bytes 813519243 (813.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5122352  bytes 813519243 (813.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2882087  bytes 668488371 (668.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3866079  bytes 760040407 (760.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5122487  bytes 813537875 (813.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5122487  bytes 813537875 (813.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
b'Error on request'
Token e243aac39fb012c084cfefeb2a6a3641 is maybe invalid 
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2882159  bytes 668503429 (668.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3866168  bytes 760055665 (760.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5122631  bytes 813558101 (813.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5122631  bytes 813558101 (813.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2882217  bytes 668516873 (668.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3866252  bytes 760070492 (760.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5122753  bytes 813575823 (813.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5122753  bytes 813575823 (813.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2882278  bytes 668531378 (668.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3866338  bytes 760085558 (760.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5122877  bytes 813594829 (813.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5122877  bytes 813594829 (813.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2882355  bytes 668548992 (668.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3866442  bytes 760104766 (760.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5123010  bytes 813613302 (813.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5123010  bytes 813613302 (813.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2882435  bytes 668566753 (668.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3866542  bytes 760123461 (760.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5123137  bytes 813631430 (813.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5123137  bytes 813631430 (813.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2882498  bytes 668581397 (668.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3866631  bytes 760138761 (760.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5123272  bytes 813651247 (813.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5123272  bytes 813651247 (813.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2882555  bytes 668594844 (668.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3866711  bytes 760153387 (760.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5123390  bytes 813668807 (813.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5123390  bytes 813668807 (813.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2882617  bytes 668609403 (668.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3866794  bytes 760168229 (760.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5123507  bytes 813687449 (813.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5123507  bytes 813687449 (813.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2882699  bytes 668627279 (668.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3866893  bytes 760187001 (760.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5123643  bytes 813706078 (813.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5123643  bytes 813706078 (813.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2882769  bytes 668644568 (668.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3866992  bytes 760205646 (760.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5123770  bytes 813724206 (813.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5123770  bytes 813724206 (813.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2882836  bytes 668659492 (668.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3867086  bytes 760221251 (760.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5123907  bytes 813744127 (813.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5123907  bytes 813744127 (813.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2882890  bytes 668672788 (668.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3867163  bytes 760235564 (760.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5124022  bytes 813761449 (813.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5124022  bytes 813761449 (813.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2882961  bytes 668688620 (668.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3867264  bytes 760251686 (760.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5124150  bytes 813780971 (813.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5124150  bytes 813780971 (813.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2883038  bytes 668706254 (668.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3867364  bytes 760270577 (760.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5124277  bytes 813799132 (813.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5124277  bytes 813799132 (813.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2883114  bytes 668723858 (668.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3867459  bytes 760288996 (760.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5124397  bytes 813816804 (813.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5124397  bytes 813816804 (813.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2883180  bytes 668738592 (668.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3867553  bytes 760304606 (760.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5124545  bytes 813837455 (813.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5124545  bytes 813837455 (813.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2883237  bytes 668751976 (668.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3867630  bytes 760318846 (760.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5124655  bytes 813854465 (813.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5124655  bytes 813854465 (813.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2883295  bytes 668766158 (668.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3867712  bytes 760333613 (760.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5124772  bytes 813873107 (813.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5124772  bytes 813873107 (813.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2883361  bytes 668781182 (668.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3867794  bytes 760348500 (760.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5124898  bytes 813890861 (813.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5124898  bytes 813890861 (813.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2883456  bytes 668802996 (668.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3867915  bytes 760371537 (760.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5125039  bytes 813909881 (813.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5125039  bytes 813909881 (813.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2883529  bytes 668818136 (668.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3868014  bytes 760387556 (760.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5125185  bytes 813930400 (813.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5125185  bytes 813930400 (813.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2883582  bytes 668831311 (668.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3868083  bytes 760401204 (760.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5125296  bytes 813947382 (813.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5125296  bytes 813947382 (813.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2883653  bytes 668846249 (668.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3868173  bytes 760416539 (760.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5125428  bytes 813966910 (813.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5125428  bytes 813966910 (813.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2883713  bytes 668859733 (668.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3868249  bytes 760430766 (760.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5125540  bytes 813984052 (813.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5125540  bytes 813984052 (813.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2883811  bytes 668881411 (668.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3868374  bytes 760454155 (760.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5125680  bytes 814003007 (814.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5125680  bytes 814003007 (814.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2883878  bytes 668896194 (668.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3868465  bytes 760469565 (760.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5125814  bytes 814022808 (814.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5125814  bytes 814022808 (814.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2883952  bytes 668912142 (668.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3868550  bytes 760484654 (760.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5125935  bytes 814040418 (814.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5125935  bytes 814040418 (814.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2884018  bytes 668926880 (668.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3868638  bytes 760499769 (760.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5126058  bytes 814059396 (814.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5126058  bytes 814059396 (814.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2884076  bytes 668940308 (668.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3868719  bytes 760514370 (760.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5126173  bytes 814076694 (814.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5126173  bytes 814076694 (814.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2884177  bytes 668962394 (668.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3868843  bytes 760537705 (760.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5126318  bytes 814096023 (814.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5126318  bytes 814096023 (814.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2884250  bytes 668977597 (668.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3868933  bytes 760553093 (760.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5126453  bytes 814115841 (814.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5126453  bytes 814115841 (814.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2884309  bytes 668991089 (668.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3869010  bytes 760567410 (760.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5126575  bytes 814133542 (814.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5126575  bytes 814133542 (814.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2884387  bytes 669007032 (669.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3869107  bytes 760584884 (760.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5126710  bytes 814153180 (814.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5126710  bytes 814153180 (814.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2884444  bytes 669020459 (669.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3869185  bytes 760599282 (760.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5126820  bytes 814170218 (814.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5126820  bytes 814170218 (814.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
b'Error on request'
Token e243aac39fb012c084cfefeb2a6a3641 is maybe invalid 
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2884521  bytes 669038050 (669.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3869283  bytes 760617980 (760.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5126955  bytes 814188811 (814.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5126955  bytes 814188811 (814.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2884607  bytes 669057066 (669.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3869394  bytes 760637599 (760.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5127088  bytes 814208617 (814.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5127088  bytes 814208617 (814.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2884661  bytes 669070250 (669.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3869475  bytes 760652184 (760.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5127208  bytes 814226214 (814.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5127208  bytes 814226214 (814.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2884722  bytes 669084584 (669.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3869562  bytes 760667229 (760.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5127334  bytes 814245394 (814.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5127334  bytes 814245394 (814.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2884782  bytes 669098235 (669.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3869639  bytes 760681513 (760.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5127452  bytes 814262930 (814.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5127452  bytes 814262930 (814.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2884867  bytes 669116365 (669.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3869740  bytes 760700523 (760.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5127584  bytes 814281350 (814.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5127584  bytes 814281350 (814.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2884950  bytes 669135054 (669.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3869850  bytes 760720076 (760.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5127731  bytes 814301922 (814.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5127731  bytes 814301922 (814.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2885010  bytes 669148749 (669.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3869933  bytes 760734860 (760.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5127861  bytes 814320075 (814.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5127861  bytes 814320075 (814.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2885073  bytes 669163223 (669.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3870015  bytes 760749642 (760.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5127979  bytes 814338793 (814.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5127979  bytes 814338793 (814.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2885132  bytes 669176731 (669.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3870092  bytes 760763938 (760.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5128090  bytes 814355919 (814.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5128090  bytes 814355919 (814.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2885218  bytes 669195085 (669.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3870194  bytes 760782977 (760.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5128221  bytes 814374263 (814.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5128221  bytes 814374263 (814.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2885307  bytes 669214221 (669.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3870306  bytes 760802596 (760.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5128371  bytes 814395139 (814.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5128371  bytes 814395139 (814.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2885362  bytes 669227537 (669.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3870385  bytes 760817056 (760.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5128498  bytes 814413135 (814.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5128498  bytes 814413135 (814.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2885424  bytes 669241920 (669.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3870473  bytes 760832340 (760.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5128618  bytes 814431957 (814.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5128618  bytes 814431957 (814.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2885478  bytes 669255152 (669.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3870550  bytes 760846653 (760.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5128735  bytes 814449359 (814.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5128735  bytes 814449359 (814.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2885563  bytes 669273235 (669.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3870651  bytes 760866612 (760.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5128873  bytes 814468068 (814.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5128873  bytes 814468068 (814.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2885650  bytes 669292391 (669.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3870760  bytes 760886226 (760.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5129007  bytes 814487930 (814.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5129007  bytes 814487930 (814.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2885720  bytes 669306743 (669.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3870849  bytes 760902191 (760.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5129135  bytes 814505927 (814.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5129135  bytes 814505927 (814.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2885786  bytes 669321394 (669.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3870934  bytes 760917209 (760.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5129257  bytes 814524777 (814.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5129257  bytes 814524777 (814.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2885838  bytes 669334618 (669.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3871011  bytes 760931482 (760.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5129377  bytes 814542395 (814.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5129377  bytes 814542395 (814.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2885919  bytes 669352583 (669.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3871113  bytes 760950751 (760.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5129508  bytes 814560786 (814.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5129508  bytes 814560786 (814.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2886005  bytes 669371484 (669.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3871224  bytes 760971706 (760.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5129645  bytes 814580650 (814.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5129645  bytes 814580650 (814.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2886058  bytes 669384660 (669.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3871306  bytes 760986441 (760.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5129771  bytes 814598748 (814.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5129771  bytes 814598748 (814.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2886120  bytes 669399209 (669.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3871394  bytes 761001675 (761.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5129891  bytes 814617546 (814.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5129891  bytes 814617546 (814.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2886178  bytes 669412713 (669.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3871472  bytes 761016116 (761.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5130005  bytes 814634698 (814.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5130005  bytes 814634698 (814.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2886234  bytes 669426137 (669.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3871553  bytes 761030811 (761.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5130132  bytes 814652658 (814.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5130132  bytes 814652658 (814.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2886345  bytes 669449660 (669.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3871695  bytes 761055632 (761.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5130303  bytes 814675110 (814.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5130303  bytes 814675110 (814.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2886405  bytes 669463275 (669.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3871777  bytes 761070328 (761.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5130435  bytes 814693583 (814.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5130435  bytes 814693583 (814.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2886465  bytes 669477702 (669.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3871858  bytes 761085036 (761.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5130549  bytes 814711915 (814.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5130549  bytes 814711915 (814.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2886520  bytes 669491014 (669.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3871939  bytes 761099644 (761.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5130666  bytes 814729377 (814.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5130666  bytes 814729377 (814.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2886574  bytes 669504178 (669.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3872017  bytes 761114002 (761.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5130781  bytes 814746675 (814.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5130781  bytes 814746675 (814.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2886686  bytes 669527766 (669.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3872155  bytes 761138484 (761.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5130938  bytes 814767948 (814.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5130938  bytes 814767948 (814.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2886747  bytes 669541477 (669.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3872236  bytes 761153055 (761.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5131060  bytes 814785684 (814.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5131060  bytes 814785684 (814.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2886809  bytes 669555852 (669.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3872319  bytes 761167908 (761.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5131181  bytes 814804534 (814.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5131181  bytes 814804534 (814.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2886866  bytes 669569248 (669.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3872399  bytes 761182470 (761.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5131302  bytes 814822116 (814.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5131302  bytes 814822116 (814.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2886933  bytes 669583912 (669.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3872488  bytes 761198602 (761.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5131421  bytes 814839658 (814.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5131421  bytes 814839658 (814.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2887054  bytes 669608170 (669.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3872628  bytes 761223238 (761.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5131580  bytes 814861109 (814.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5131580  bytes 814861109 (814.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2887113  bytes 669621666 (669.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3872704  bytes 761237520 (761.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5131688  bytes 814878103 (814.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5131688  bytes 814878103 (814.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2887186  bytes 669637557 (669.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3872797  bytes 761254929 (761.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5131825  bytes 814897823 (814.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5131825  bytes 814897823 (814.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2887241  bytes 669650923 (669.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3872874  bytes 761269262 (761.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5131929  bytes 814914573 (814.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5131929  bytes 814914573 (814.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2887297  bytes 669664207 (669.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3872952  bytes 761283599 (761.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5132040  bytes 814931699 (814.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5132040  bytes 814931699 (814.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2887390  bytes 669683913 (669.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3873069  bytes 761303909 (761.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5132187  bytes 814952272 (814.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5132187  bytes 814952272 (814.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2887470  bytes 669702050 (669.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3873171  bytes 761323092 (761.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5132314  bytes 814970532 (814.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5132314  bytes 814970532 (814.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2887509  bytes 669711529 (669.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3873229  bytes 761332899 (761.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5132394  bytes 814981516 (814.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5132394  bytes 814981516 (814.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2887544  bytes 669720105 (669.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3873285  bytes 761342413 (761.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5132462  bytes 814990623 (814.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5132462  bytes 814990623 (814.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2887580  bytes 669728765 (669.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3873339  bytes 761351783 (761.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5132529  bytes 814999714 (814.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5132529  bytes 814999714 (814.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2887650  bytes 669743197 (669.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3873427  bytes 761366678 (761.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5132626  bytes 815011959 (815.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5132626  bytes 815011959 (815.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2887709  bytes 669756404 (669.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3873508  bytes 761380811 (761.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5132702  bytes 815021688 (815.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5132702  bytes 815021688 (815.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2887756  bytes 669766667 (669.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3873572  bytes 761390958 (761.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5132779  bytes 815032517 (815.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5132779  bytes 815032517 (815.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2887816  bytes 669780175 (669.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3873647  bytes 761405142 (761.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5132889  bytes 815049555 (815.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5132889  bytes 815049555 (815.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2887868  bytes 669793343 (669.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3873723  bytes 761419336 (761.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5133005  bytes 815066965 (815.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5133005  bytes 815066965 (815.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2887955  bytes 669812429 (669.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3873835  bytes 761439245 (761.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5133148  bytes 815087362 (815.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5133148  bytes 815087362 (815.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2888034  bytes 669830158 (669.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3873939  bytes 761458231 (761.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5133273  bytes 815105456 (815.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5133273  bytes 815105456 (815.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2888094  bytes 669844429 (669.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3874024  bytes 761473176 (761.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5133402  bytes 815124760 (815.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5133402  bytes 815124760 (815.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2888152  bytes 669857904 (669.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3874105  bytes 761487735 (761.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5133515  bytes 815141954 (815.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5133515  bytes 815141954 (815.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2888208  bytes 669871415 (669.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3874189  bytes 761502652 (761.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5133631  bytes 815159364 (815.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5133631  bytes 815159364 (815.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2888297  bytes 669890629 (669.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3874301  bytes 761522493 (761.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5133778  bytes 815179923 (815.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5133778  bytes 815179923 (815.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2888371  bytes 669908160 (669.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3874401  bytes 761541261 (761.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5133908  bytes 815198295 (815.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5133908  bytes 815198295 (815.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2888438  bytes 669923267 (669.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3874494  bytes 761556962 (761.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5134040  bytes 815217815 (815.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5134040  bytes 815217815 (815.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2888496  bytes 669936739 (669.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3874573  bytes 761571426 (761.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5134145  bytes 815234593 (815.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5134145  bytes 815234593 (815.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2888552  bytes 669950003 (669.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3874648  bytes 761585646 (761.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5134252  bytes 815251475 (815.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5134252  bytes 815251475 (815.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2888644  bytes 669969278 (669.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3874758  bytes 761605360 (761.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5134399  bytes 815271996 (815.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5134399  bytes 815271996 (815.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2888720  bytes 669986823 (669.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3874861  bytes 761624324 (761.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5134523  bytes 815289932 (815.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5134523  bytes 815289932 (815.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2888782  bytes 670001372 (670.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3874953  bytes 761639813 (761.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5134655  bytes 815309494 (815.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5134655  bytes 815309494 (815.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2888839  bytes 670014752 (670.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3875031  bytes 761654163 (761.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5134768  bytes 815326748 (815.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5134768  bytes 815326748 (815.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2888892  bytes 670027908 (670.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3875104  bytes 761669307 (761.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5134876  bytes 815343528 (815.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5134876  bytes 815343528 (815.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2888964  bytes 670043113 (670.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3875201  bytes 761685488 (761.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5135013  bytes 815363472 (815.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5135013  bytes 815363472 (815.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2889058  bytes 670064737 (670.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3875319  bytes 761708324 (761.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5135145  bytes 815382082 (815.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5135145  bytes 815382082 (815.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2889133  bytes 670081711 (670.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3875415  bytes 761727355 (761.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5135293  bytes 815402575 (815.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5135293  bytes 815402575 (815.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2889191  bytes 670095211 (670.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3875489  bytes 761741420 (761.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5135402  bytes 815419467 (815.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5135402  bytes 815419467 (815.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2889249  bytes 670109386 (670.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3875570  bytes 761756070 (761.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5135512  bytes 815436505 (815.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5135512  bytes 815436505 (815.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2889319  bytes 670124692 (670.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3875665  bytes 761771847 (761.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5135636  bytes 815455653 (815.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5135636  bytes 815455653 (815.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2889421  bytes 670146898 (670.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3875794  bytes 761795610 (761.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5135781  bytes 815475017 (815.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5135781  bytes 815475017 (815.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2889492  bytes 670161852 (670.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3875879  bytes 761811627 (761.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5135920  bytes 815494904 (815.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5135920  bytes 815494904 (815.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2889547  bytes 670175164 (670.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3875958  bytes 761826015 (761.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5136038  bytes 815512418 (815.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5136038  bytes 815512418 (815.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2889600  bytes 670188288 (670.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3876036  bytes 761840417 (761.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5136151  bytes 815529612 (815.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5136151  bytes 815529612 (815.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2889661  bytes 670202719 (670.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3876124  bytes 761855572 (761.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5136276  bytes 815548812 (815.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5136276  bytes 815548812 (815.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2889772  bytes 670228208 (670.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3876260  bytes 761879831 (761.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5136421  bytes 815568114 (815.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5136421  bytes 815568114 (815.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2889840  bytes 670243166 (670.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3876347  bytes 761894951 (761.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5136539  bytes 815586808 (815.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5136539  bytes 815586808 (815.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2889901  bytes 670256853 (670.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3876432  bytes 761911476 (761.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5136660  bytes 815604517 (815.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5136660  bytes 815604517 (815.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2889953  bytes 670269957 (670.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3876510  bytes 761925834 (761.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5136773  bytes 815621711 (815.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5136773  bytes 815621711 (815.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2890019  bytes 670284737 (670.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3876598  bytes 761941010 (761.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5136904  bytes 815641281 (815.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5136904  bytes 815641281 (815.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2890107  bytes 670302975 (670.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3876702  bytes 761960153 (761.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5137043  bytes 815660118 (815.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5137043  bytes 815660118 (815.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2890169  bytes 670317323 (670.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3876784  bytes 761974508 (761.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5137126  bytes 815671965 (815.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5137126  bytes 815671965 (815.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2890228  bytes 670330878 (670.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3876866  bytes 761989181 (761.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5137250  bytes 815689852 (815.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5137250  bytes 815689852 (815.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2890282  bytes 670344213 (670.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3876944  bytes 762003582 (762.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5137365  bytes 815707174 (815.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5137365  bytes 815707174 (815.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2890362  bytes 670360502 (670.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3877047  bytes 762020746 (762.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5137496  bytes 815726744 (815.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5137496  bytes 815726744 (815.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2890447  bytes 670378651 (670.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3877150  bytes 762039926 (762.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5137631  bytes 815745332 (815.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5137631  bytes 815745332 (815.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2890535  bytes 670397597 (670.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3877261  bytes 762059509 (762.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5137770  bytes 815765436 (815.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5137770  bytes 815765436 (815.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2890588  bytes 670410777 (670.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3877340  bytes 762074009 (762.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5137894  bytes 815783240 (815.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5137894  bytes 815783240 (815.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2890643  bytes 670424077 (670.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3877417  bytes 762088333 (762.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5138010  bytes 815800650 (815.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5138010  bytes 815800650 (815.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2890703  bytes 670438620 (670.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3877505  bytes 762103520 (762.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5138139  bytes 815820058 (815.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5138139  bytes 815820058 (815.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2890780  bytes 670456264 (670.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3877606  bytes 762122503 (762.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5138269  bytes 815838386 (815.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5138269  bytes 815838386 (815.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2890863  bytes 670475087 (670.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3877714  bytes 762141913 (762.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5138401  bytes 815858002 (815.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5138401  bytes 815858002 (815.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2890915  bytes 670488179 (670.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3877791  bytes 762156245 (762.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5138521  bytes 815875599 (815.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5138521  bytes 815875599 (815.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2890971  bytes 670501566 (670.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3877870  bytes 762170716 (762.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5138632  bytes 815892713 (815.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5138632  bytes 815892713 (815.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2891039  bytes 670516458 (670.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3877961  bytes 762186058 (762.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5138757  bytes 815911861 (815.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5138757  bytes 815911861 (815.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2891121  bytes 670534340 (670.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3878061  bytes 762205101 (762.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5138886  bytes 815930138 (815.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5138886  bytes 815930138 (815.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2891207  bytes 670553185 (670.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3878166  bytes 762224454 (762.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5139011  bytes 815949236 (815.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5139011  bytes 815949236 (815.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2891262  bytes 670566489 (670.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3878246  bytes 762239007 (762.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5139137  bytes 815967298 (815.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5139137  bytes 815967298 (815.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2891319  bytes 670580027 (670.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3878326  bytes 762253542 (762.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5139257  bytes 815984962 (815.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5139257  bytes 815984962 (815.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2891381  bytes 670594547 (670.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3878413  bytes 762268631 (762.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5139384  bytes 816004266 (816.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5139384  bytes 816004266 (816.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2891455  bytes 670611125 (670.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3878511  bytes 762287381 (762.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5139511  bytes 816022285 (816.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5139511  bytes 816022285 (816.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2891540  bytes 670631039 (670.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3878623  bytes 762307010 (762.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5139651  bytes 816042379 (816.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5139651  bytes 816042379 (816.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2891596  bytes 670644358 (670.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3878706  bytes 762321753 (762.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5139781  bytes 816060711 (816.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5139781  bytes 816060711 (816.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2891648  bytes 670657606 (670.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3878783  bytes 762336093 (762.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5139898  bytes 816078173 (816.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5139898  bytes 816078173 (816.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2891708  bytes 670671990 (670.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3878864  bytes 762350783 (762.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5140017  bytes 816096965 (816.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5140017  bytes 816096965 (816.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2891784  bytes 670692170 (670.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3878969  bytes 762369828 (762.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5140140  bytes 816114858 (816.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5140140  bytes 816114858 (816.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2891891  bytes 670715246 (670.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3879098  bytes 762393570 (762.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5140283  bytes 816135222 (816.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5140283  bytes 816135222 (816.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2891951  bytes 670729221 (670.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3879182  bytes 762410315 (762.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5140400  bytes 816152663 (816.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5140400  bytes 816152663 (816.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2892007  bytes 670742653 (670.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3879260  bytes 762424661 (762.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5140520  bytes 816170281 (816.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5140520  bytes 816170281 (816.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2892071  bytes 670757468 (670.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3879346  bytes 762439776 (762.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5140639  bytes 816189169 (816.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5140639  bytes 816189169 (816.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2892144  bytes 670772716 (670.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3879443  bytes 762459936 (762.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5140755  bytes 816206555 (816.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5140755  bytes 816206555 (816.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2892248  bytes 670795663 (670.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3879574  bytes 762483955 (762.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5140903  bytes 816227218 (816.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5140903  bytes 816227218 (816.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2892302  bytes 670808791 (670.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3879651  bytes 762498291 (762.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5141013  bytes 816244256 (816.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5141013  bytes 816244256 (816.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2892361  bytes 670822522 (670.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3879735  bytes 762513080 (762.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5141141  bytes 816262375 (816.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5141141  bytes 816262375 (816.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2892424  bytes 670837180 (670.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3879823  bytes 762528262 (762.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5141268  bytes 816281697 (816.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5141268  bytes 816281697 (816.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2892486  bytes 670851056 (670.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3879907  bytes 762543488 (762.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5141381  bytes 816298891 (816.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5141381  bytes 816298891 (816.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2892593  bytes 670874325 (670.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3880042  bytes 762567789 (762.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5141538  bytes 816320119 (816.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5141538  bytes 816320119 (816.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2892648  bytes 670887755 (670.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3880118  bytes 762582137 (762.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5141647  bytes 816337167 (816.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5141647  bytes 816337167 (816.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2892705  bytes 670901107 (670.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3880196  bytes 762596607 (762.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5141770  bytes 816354956 (816.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5141770  bytes 816354956 (816.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2892772  bytes 670915910 (670.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3880286  bytes 762611902 (762.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5141895  bytes 816374180 (816.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5141895  bytes 816374180 (816.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2892823  bytes 670928926 (670.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3880362  bytes 762626164 (762.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5142001  bytes 816391010 (816.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5142001  bytes 816391010 (816.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2892910  bytes 670947873 (670.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3880475  bytes 762646060 (762.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5142149  bytes 816411554 (816.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5142149  bytes 816411554 (816.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2892986  bytes 670965489 (670.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3880576  bytes 762664915 (762.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5142268  bytes 816429214 (816.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5142268  bytes 816429214 (816.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2893039  bytes 670978677 (670.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3880655  bytes 762679307 (762.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5142394  bytes 816447159 (816.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5142394  bytes 816447159 (816.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2893104  bytes 670993581 (670.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3880744  bytes 762694677 (762.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5142517  bytes 816466337 (816.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5142517  bytes 816466337 (816.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2893160  bytes 671006917 (671.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3880819  bytes 762708825 (762.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5142632  bytes 816483635 (816.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5142632  bytes 816483635 (816.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2893251  bytes 671026106 (671.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3880933  bytes 762728936 (762.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5142780  bytes 816504164 (816.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5142780  bytes 816504164 (816.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2893329  bytes 671043692 (671.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3881032  bytes 762747604 (762.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5142907  bytes 816522256 (816.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5142907  bytes 816522256 (816.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2893389  bytes 671057264 (671.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3881112  bytes 762762037 (762.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5143039  bytes 816540512 (816.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5143039  bytes 816540512 (816.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2893454  bytes 671072046 (671.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3881204  bytes 762777486 (762.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5143173  bytes 816560250 (816.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5143173  bytes 816560250 (816.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
b'Error on request'
Token e243aac39fb012c084cfefeb2a6a3641 is maybe invalid 
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2893509  bytes 671085364 (671.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3881283  bytes 762791896 (762.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5143290  bytes 816577690 (816.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5143290  bytes 816577690 (816.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2893597  bytes 671104561 (671.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3881394  bytes 762811702 (762.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5143433  bytes 816597956 (816.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5143433  bytes 816597956 (816.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2893682  bytes 671122719 (671.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3881501  bytes 762831125 (762.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5143556  bytes 816615964 (816.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5143556  bytes 816615964 (816.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2893764  bytes 671138695 (671.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3881604  bytes 762849115 (762.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5143684  bytes 816634080 (816.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5143684  bytes 816634080 (816.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2893838  bytes 671153827 (671.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3881694  bytes 762864395 (762.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5143814  bytes 816653600 (816.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5143814  bytes 816653600 (816.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2893892  bytes 671167059 (671.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3881772  bytes 762878821 (762.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5143928  bytes 816670846 (816.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5143928  bytes 816670846 (816.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2893976  bytes 671185734 (671.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3881882  bytes 762898587 (762.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5144068  bytes 816690934 (816.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5144068  bytes 816690934 (816.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2894049  bytes 671203211 (671.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3881978  bytes 762917041 (762.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5144192  bytes 816708740 (816.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5144192  bytes 816708740 (816.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2894105  bytes 671216582 (671.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3882063  bytes 762931900 (762.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5144318  bytes 816726803 (816.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5144318  bytes 816726803 (816.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2894170  bytes 671231278 (671.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3882151  bytes 762947072 (762.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5144448  bytes 816746381 (816.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5144448  bytes 816746381 (816.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2894220  bytes 671244385 (671.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3882226  bytes 762961219 (762.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5144559  bytes 816763471 (816.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5144559  bytes 816763471 (816.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2894305  bytes 671263178 (671.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3882332  bytes 762980679 (762.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5144689  bytes 816782850 (816.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5144689  bytes 816782850 (816.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2894381  bytes 671280644 (671.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3882434  bytes 762999494 (762.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5144815  bytes 816800950 (816.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5144815  bytes 816800950 (816.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2894437  bytes 671293956 (671.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3882516  bytes 763014148 (763.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5144944  bytes 816819168 (816.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5144944  bytes 816819168 (816.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2894502  bytes 671308848 (671.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3882603  bytes 763029270 (763.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5145070  bytes 816838348 (816.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5145070  bytes 816838348 (816.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2894563  bytes 671322634 (671.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3882683  bytes 763043826 (763.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5145187  bytes 816855832 (816.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5145187  bytes 816855832 (816.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2894626  bytes 671337164 (671.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3882772  bytes 763059282 (763.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5145316  bytes 816875183 (816.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5145316  bytes 816875183 (816.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2894723  bytes 671359014 (671.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3882895  bytes 763082450 (763.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5145452  bytes 816894005 (816.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5145452  bytes 816894005 (816.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2894779  bytes 671372480 (671.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3882972  bytes 763096704 (763.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5145576  bytes 816911908 (816.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5145576  bytes 816911908 (816.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2894806  bytes 671378427 (671.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3883011  bytes 763101981 (763.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5145608  bytes 816915274 (816.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5145608  bytes 816915274 (816.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2894825  bytes 671383050 (671.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3883041  bytes 763106486 (763.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5145628  bytes 816916694 (816.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5145628  bytes 816916694 (816.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2894848  bytes 671388600 (671.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3883076  bytes 763111454 (763.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5145652  bytes 816919502 (816.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5145652  bytes 816919502 (816.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2894902  bytes 671401264 (671.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3883153  bytes 763125200 (763.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5145699  bytes 816922710 (816.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5145699  bytes 816922710 (816.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2894957  bytes 671414610 (671.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3883232  bytes 763139814 (763.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5145815  bytes 816940060 (816.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5145815  bytes 816940060 (816.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2895020  bytes 671429228 (671.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3883322  bytes 763155132 (763.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5145953  bytes 816959998 (816.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5145953  bytes 816959998 (816.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2895072  bytes 671442351 (671.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3883397  bytes 763169275 (763.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5146068  bytes 816977332 (816.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5146068  bytes 816977332 (816.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2895134  bytes 671456812 (671.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3883482  bytes 763184225 (763.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5146189  bytes 816996182 (816.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5146189  bytes 816996182 (816.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2895235  bytes 671478929 (671.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3883609  bytes 763207775 (763.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5146328  bytes 817015137 (817.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5146328  bytes 817015137 (817.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2895296  bytes 671492648 (671.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3883686  bytes 763222153 (763.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5146450  bytes 817032835 (817.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5146450  bytes 817032835 (817.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2895363  bytes 671507614 (671.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3883775  bytes 763237511 (763.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5146596  bytes 817053247 (817.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5146596  bytes 817053247 (817.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2895426  bytes 671521524 (671.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3883854  bytes 763252065 (763.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5146721  bytes 817071065 (817.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5146721  bytes 817071065 (817.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2895486  bytes 671535857 (671.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3883939  bytes 763267012 (763.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5146850  bytes 817090413 (817.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5146850  bytes 817090413 (817.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2895567  bytes 671553727 (671.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3884046  bytes 763286425 (763.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5146986  bytes 817109057 (817.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5146986  bytes 817109057 (817.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2895624  bytes 671567142 (671.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3884124  bytes 763300385 (763.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5147067  bytes 817119674 (817.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5147067  bytes 817119674 (817.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2895693  bytes 671581985 (671.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3884215  bytes 763315770 (763.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5147206  bytes 817139698 (817.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5147206  bytes 817139698 (817.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2895750  bytes 671595507 (671.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3884295  bytes 763330322 (763.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5147319  bytes 817156916 (817.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5147319  bytes 817156916 (817.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2895832  bytes 671611845 (671.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3884407  bytes 763356646 (763.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5147454  bytes 817176634 (817.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5147454  bytes 817176634 (817.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2895912  bytes 671629698 (671.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3884513  bytes 763375972 (763.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5147587  bytes 817195106 (817.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5147587  bytes 817195106 (817.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2895992  bytes 671647560 (671.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3884613  bytes 763394735 (763.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5147716  bytes 817213462 (817.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5147716  bytes 817213462 (817.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2896056  bytes 671662280 (671.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3884699  bytes 763409859 (763.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5147853  bytes 817233382 (817.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5147853  bytes 817233382 (817.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2896111  bytes 671675658 (671.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3884778  bytes 763424325 (763.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5147969  bytes 817250756 (817.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5147969  bytes 817250756 (817.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2896171  bytes 671690035 (671.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3884863  bytes 763439320 (763.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5148095  bytes 817269948 (817.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5148095  bytes 817269948 (817.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2896248  bytes 671707650 (671.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3884964  bytes 763458366 (763.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5148224  bytes 817288188 (817.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5148224  bytes 817288188 (817.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2896326  bytes 671725453 (671.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3885067  bytes 763477284 (763.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5148352  bytes 817306392 (817.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5148352  bytes 817306392 (817.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2896389  bytes 671740056 (671.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3885156  bytes 763492553 (763.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5148488  bytes 817326202 (817.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5148488  bytes 817326202 (817.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2896445  bytes 671753419 (671.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3885232  bytes 763506842 (763.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5148597  bytes 817343212 (817.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5148597  bytes 817343212 (817.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2896512  bytes 671768161 (671.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3885317  bytes 763521798 (763.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5148722  bytes 817362306 (817.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5148722  bytes 817362306 (817.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2896596  bytes 671786446 (671.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3885421  bytes 763541040 (763.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5148851  bytes 817380547 (817.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5148851  bytes 817380547 (817.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2896675  bytes 671804138 (671.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3885516  bytes 763559407 (763.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5148971  bytes 817398181 (817.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5148971  bytes 817398181 (817.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2896741  bytes 671818880 (671.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3885611  bytes 763575111 (763.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5149118  bytes 817418718 (817.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5149118  bytes 817418718 (817.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2896797  bytes 671832342 (671.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3885688  bytes 763589441 (763.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5149233  bytes 817436016 (817.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5149233  bytes 817436016 (817.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2896858  bytes 671846700 (671.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3885769  bytes 763604113 (763.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5149347  bytes 817454408 (817.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5149347  bytes 817454408 (817.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2896933  bytes 671864157 (671.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3885871  bytes 763623095 (763.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5149478  bytes 817472716 (817.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5149478  bytes 817472716 (817.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2897009  bytes 671881816 (671.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3885974  bytes 763642113 (763.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5149606  bytes 817490982 (817.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5149606  bytes 817490982 (817.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2897077  bytes 671896734 (671.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3886069  bytes 763657845 (763.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5149752  bytes 817511529 (817.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5149752  bytes 817511529 (817.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2897140  bytes 671910532 (671.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3886147  bytes 763673373 (763.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5149869  bytes 817528777 (817.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5149869  bytes 817528777 (817.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2897206  bytes 671925185 (671.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3886233  bytes 763688393 (763.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5149999  bytes 817548157 (817.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5149999  bytes 817548157 (817.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
b'Error on request'
Token e243aac39fb012c084cfefeb2a6a3641 is maybe invalid 
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2897284  bytes 671941859 (671.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3886334  bytes 763707490 (763.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5150123  bytes 817566138 (817.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5150123  bytes 817566138 (817.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2897366  bytes 671960691 (671.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3886436  bytes 763726294 (763.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5150247  bytes 817584074 (817.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5150247  bytes 817584074 (817.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2897436  bytes 671975918 (671.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3886529  bytes 763742950 (763.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5150392  bytes 817604470 (817.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5150392  bytes 817604470 (817.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2897489  bytes 671989085 (671.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3886605  bytes 763757222 (763.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5150502  bytes 817621508 (817.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5150502  bytes 817621508 (817.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2897556  bytes 672003871 (672.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3886691  bytes 763772280 (763.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5150632  bytes 817640886 (817.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5150632  bytes 817640886 (817.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2897613  bytes 672017242 (672.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3886771  bytes 763786981 (763.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5150752  bytes 817658483 (817.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5150752  bytes 817658483 (817.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2897716  bytes 672039488 (672.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3886894  bytes 763810637 (763.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5150887  bytes 817677167 (817.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5150887  bytes 817677167 (817.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2897787  bytes 672054474 (672.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3886983  bytes 763825937 (763.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5151016  bytes 817696635 (817.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5151016  bytes 817696635 (817.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2897848  bytes 672068065 (672.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3887061  bytes 763840270 (763.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5151140  bytes 817714438 (817.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5151140  bytes 817714438 (817.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2897911  bytes 672082594 (672.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3887147  bytes 763855211 (763.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5151266  bytes 817733548 (817.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5151266  bytes 817733548 (817.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2897963  bytes 672095605 (672.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3887223  bytes 763869440 (763.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5151377  bytes 817750626 (817.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5151377  bytes 817750626 (817.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2898069  bytes 672118034 (672.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3887352  bytes 763893205 (763.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5151522  bytes 817769930 (817.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5151522  bytes 817769930 (817.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2898132  bytes 672132752 (672.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3887440  bytes 763908411 (763.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5151659  bytes 817789876 (817.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5151659  bytes 817789876 (817.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2898184  bytes 672145855 (672.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3887518  bytes 763922740 (763.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5151776  bytes 817807317 (817.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5151776  bytes 817807317 (817.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2898263  bytes 672162004 (672.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3887621  bytes 763939183 (763.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5151913  bytes 817827145 (817.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5151913  bytes 817827145 (817.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2898320  bytes 672175403 (672.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3887699  bytes 763953604 (763.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5152030  bytes 817844571 (817.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5152030  bytes 817844571 (817.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2898399  bytes 672193166 (672.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3887801  bytes 763972656 (763.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5152163  bytes 817863035 (817.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5152163  bytes 817863035 (817.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2898482  bytes 672212069 (672.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3887913  bytes 763992390 (763.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5152306  bytes 817883443 (817.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5152306  bytes 817883443 (817.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2898534  bytes 672225160 (672.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3887987  bytes 764006451 (764.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5152422  bytes 817900780 (817.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5152422  bytes 817900780 (817.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2898594  bytes 672239526 (672.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3888071  bytes 764021417 (764.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5152536  bytes 817919302 (817.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5152536  bytes 817919302 (817.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2898655  bytes 672253724 (672.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3888156  bytes 764036770 (764.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5152663  bytes 817937248 (817.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5152663  bytes 817937248 (817.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2898734  bytes 672271453 (672.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3888257  bytes 764055730 (764.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5152798  bytes 817955801 (817.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5152798  bytes 817955801 (817.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2898822  bytes 672290641 (672.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3888368  bytes 764075319 (764.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5152945  bytes 817976433 (817.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5152945  bytes 817976433 (817.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2898884  bytes 672304380 (672.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3888453  bytes 764090262 (764.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5153071  bytes 817994341 (817.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5153071  bytes 817994341 (817.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2898949  bytes 672319081 (672.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3888544  bytes 764105761 (764.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5153193  bytes 818013279 (818.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5153193  bytes 818013279 (818.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2899006  bytes 672332488 (672.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3888623  bytes 764120228 (764.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5153303  bytes 818030341 (818.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5153303  bytes 818030341 (818.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2899087  bytes 672350337 (672.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3888726  bytes 764139316 (764.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5153436  bytes 818048789 (818.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5153436  bytes 818048789 (818.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2899172  bytes 672369395 (672.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3888837  bytes 764158995 (764.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5153585  bytes 818069591 (818.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5153585  bytes 818069591 (818.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7fa47914a8>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fa47914a8>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fa47914a8>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2899194  bytes 672374526 (672.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3888880  bytes 764164442 (764.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5153618  bytes 818071841 (818.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5153618  bytes 818071841 (818.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7f773ba518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f773ba518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f773ba518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2899218  bytes 672380424 (672.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3888922  bytes 764169899 (764.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5153650  bytes 818075225 (818.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5153650  bytes 818075225 (818.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7f799ee518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f799ee518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f799ee518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2899240  bytes 672385647 (672.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3888961  bytes 764175089 (764.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5153676  bytes 818077091 (818.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5153676  bytes 818077091 (818.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7f7968d518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f7968d518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f7968d518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2899283  bytes 672394958 (672.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3889021  bytes 764184656 (764.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5153716  bytes 818079829 (818.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5153716  bytes 818079829 (818.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7f9bd64518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f9bd64518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f9bd64518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2899328  bytes 672405394 (672.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3889096  bytes 764195793 (764.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5153759  bytes 818083943 (818.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5153759  bytes 818083943 (818.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7f9d80d518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f9d80d518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f9d80d518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2899350  bytes 672410743 (672.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3889140  bytes 764201397 (764.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5153798  bytes 818086632 (818.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5153798  bytes 818086632 (818.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7fb4dd6518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fb4dd6518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fb4dd6518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2899376  bytes 672416761 (672.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3889183  bytes 764206958 (764.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5153830  bytes 818090016 (818.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5153830  bytes 818090016 (818.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7faab52518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7faab52518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7faab52518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2899396  bytes 672421752 (672.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3889217  bytes 764211784 (764.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5153850  bytes 818091406 (818.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5153850  bytes 818091406 (818.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7f972a6518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f972a6518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f972a6518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2899444  bytes 672431568 (672.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3889279  bytes 764221612 (764.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5153890  bytes 818094145 (818.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5153890  bytes 818094145 (818.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7f7b730518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f7b730518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f7b730518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2899487  bytes 672441648 (672.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3889350  bytes 764232342 (764.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5153939  bytes 818098725 (818.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5153939  bytes 818098725 (818.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7f7a05f518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f7a05f518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f7a05f518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2899506  bytes 672446684 (672.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3889391  bytes 764237743 (764.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5153978  bytes 818101413 (818.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5153978  bytes 818101413 (818.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7f9074f518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f9074f518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f9074f518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2899528  bytes 672452494 (672.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3889428  bytes 764242900 (764.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5154002  bytes 818104191 (818.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5154002  bytes 818104191 (818.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7f8839d518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f8839d518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f8839d518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2899546  bytes 672457464 (672.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3889464  bytes 764247905 (764.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5154028  bytes 818106047 (818.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5154028  bytes 818106047 (818.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7faa437518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7faa437518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7faa437518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2899587  bytes 672465717 (672.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3889517  bytes 764256190 (764.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5154068  bytes 818108785 (818.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5154068  bytes 818108785 (818.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7fa58b8518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fa58b8518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fa58b8518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2899637  bytes 672477409 (672.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3889598  bytes 764268516 (764.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5154121  bytes 818113693 (818.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5154121  bytes 818113693 (818.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7f8acc7518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f8acc7518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f8acc7518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2899655  bytes 672482313 (672.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3889636  bytes 764273703 (764.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5154156  bytes 818116133 (818.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5154156  bytes 818116133 (818.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7f9ba6e518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f9ba6e518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f9ba6e518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2899681  bytes 672488524 (672.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3889681  bytes 764279434 (764.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5154190  bytes 818119637 (818.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5154190  bytes 818119637 (818.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7fa15114a8>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fa15114a8>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fa15114a8>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2899701  bytes 672493522 (672.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3889718  bytes 764284473 (764.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5154218  bytes 818121643 (818.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5154218  bytes 818121643 (818.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7f9c98f518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f9c98f518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f9c98f518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2899721  bytes 672498590 (672.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3889755  bytes 764289614 (764.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5154247  bytes 818123634 (818.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5154247  bytes 818123634 (818.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7f8f490518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f8f490518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f8f490518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2899791  bytes 672513317 (672.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3889851  bytes 764305052 (764.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5154305  bytes 818128822 (818.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5154305  bytes 818128822 (818.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7fb1bf04a8>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fb1bf04a8>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fb1bf04a8>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2899810  bytes 672518339 (672.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3889888  bytes 764310235 (764.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5154331  bytes 818130678 (818.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5154331  bytes 818130678 (818.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7fb14e5518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fb14e5518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fb14e5518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2899835  bytes 672524237 (672.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3889933  bytes 764315868 (764.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5154370  bytes 818134428 (818.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5154370  bytes 818134428 (818.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7f7725f4a8>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f7725f4a8>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f7725f4a8>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2899858  bytes 672529376 (672.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3889975  bytes 764321238 (764.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5154396  bytes 818136284 (818.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5154396  bytes 818136284 (818.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7f8db87518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f8db87518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f8db87518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2899874  bytes 672534083 (672.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3890009  bytes 764326056 (764.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5154418  bytes 818137872 (818.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5154418  bytes 818137872 (818.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7fa71e54a8>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fa71e54a8>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fa71e54a8>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2899944  bytes 672548754 (672.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3890106  bytes 764341356 (764.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5154483  bytes 818143462 (818.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5154483  bytes 818143462 (818.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7f9a5ac518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f9a5ac518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f9a5ac518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2899963  bytes 672553669 (672.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3890145  bytes 764346692 (764.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5154509  bytes 818145318 (818.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5154509  bytes 818145318 (818.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7fac851518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fac851518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fac851518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2899991  bytes 672559900 (672.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3890193  bytes 764352581 (764.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5154548  bytes 818149069 (818.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5154548  bytes 818149069 (818.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7f93ae6518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f93ae6518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f93ae6518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2900008  bytes 672564822 (672.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3890226  bytes 764357401 (764.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5154572  bytes 818150797 (818.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5154572  bytes 818150797 (818.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7f8084b518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f8084b518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f8084b518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2900025  bytes 672569649 (672.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3890261  bytes 764362338 (764.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5154596  bytes 818152513 (818.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5154596  bytes 818152513 (818.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7f7aa44518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f7aa44518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f7aa44518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2900079  bytes 672580474 (672.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3890330  bytes 764372682 (764.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5154653  bytes 818157533 (818.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5154653  bytes 818157533 (818.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7f79b0d518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f79b0d518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f79b0d518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2900119  bytes 672589672 (672.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3890401  bytes 764383338 (764.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5154696  bytes 818160704 (818.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5154696  bytes 818160704 (818.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7f81273518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f81273518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f81273518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2900142  bytes 672595558 (672.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3890443  bytes 764388861 (764.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5154737  bytes 818164582 (818.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5154737  bytes 818164582 (818.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7f939ca518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f939ca518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f939ca518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2900159  bytes 672600399 (672.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3890478  bytes 764393811 (764.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5154761  bytes 818166326 (818.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5154761  bytes 818166326 (818.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7f9e3e9518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f9e3e9518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f9e3e9518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2900178  bytes 672605369 (672.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3890514  bytes 764398808 (764.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5154789  bytes 818168332 (818.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5154789  bytes 818168332 (818.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7fb3257518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fb3257518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fb3257518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2900233  bytes 672616333 (672.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3890586  bytes 764409432 (764.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5154845  bytes 818173343 (818.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5154845  bytes 818173343 (818.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7f9cfff518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f9cfff518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f9cfff518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2900270  bytes 672625356 (672.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3890652  bytes 764419709 (764.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5154880  bytes 818175813 (818.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5154880  bytes 818175813 (818.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7f8a9374a8>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f8a9374a8>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f8a9374a8>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2900295  bytes 672631366 (672.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3890695  bytes 764425323 (764.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5154921  bytes 818179692 (818.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5154921  bytes 818179692 (818.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7f88949518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f88949518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f88949518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2900311  bytes 672636097 (672.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3890728  bytes 764430100 (764.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5154943  bytes 818181280 (818.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5154943  bytes 818181280 (818.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7f78ceb518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f78ceb518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f78ceb518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2900328  bytes 672640912 (672.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3890761  bytes 764434873 (764.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5154967  bytes 818183008 (818.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5154967  bytes 818183008 (818.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7f968134a8>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f968134a8>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f968134a8>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2900384  bytes 672652070 (672.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3890836  bytes 764445701 (764.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5155023  bytes 818187985 (818.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5155023  bytes 818187985 (818.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7f802fc4a8>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f802fc4a8>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f802fc4a8>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2900417  bytes 672660767 (672.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3890898  bytes 764455701 (764.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5155058  bytes 818190455 (818.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5155058  bytes 818190455 (818.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7f8ddb1518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f8ddb1518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f8ddb1518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2900445  bytes 672666865 (672.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3890949  bytes 764461833 (764.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5155099  bytes 818194333 (818.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5155099  bytes 818194333 (818.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7f951ad518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f951ad518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f951ad518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2900465  bytes 672672016 (672.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3890988  bytes 764467014 (764.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5155121  bytes 818195921 (818.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5155121  bytes 818195921 (818.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7f91532518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f91532518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f91532518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2900482  bytes 672676807 (672.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3891022  bytes 764471829 (764.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5155145  bytes 818197649 (818.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5155145  bytes 818197649 (818.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7f9a70a518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f9a70a518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f9a70a518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2900545  bytes 672688412 (672.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3891098  bytes 764482792 (764.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5155195  bytes 818202159 (818.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5155195  bytes 818202159 (818.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7f87f4b518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f87f4b518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f87f4b518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2900580  bytes 672697335 (672.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3891163  bytes 764492992 (764.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5155232  bytes 818204795 (818.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5155232  bytes 818204795 (818.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7fa6c8b518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fa6c8b518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fa6c8b518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2900607  bytes 672703416 (672.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3891212  bytes 764498965 (764.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5155281  bytes 818209306 (818.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5155281  bytes 818209306 (818.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7fa303a518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fa303a518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fa303a518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2900622  bytes 672708095 (672.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3891244  bytes 764503668 (764.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5155305  bytes 818211050 (818.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5155305  bytes 818211050 (818.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7f8e711518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f8e711518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f8e711518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2900640  bytes 672712996 (672.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3891276  bytes 764508377 (764.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5155327  bytes 818212618 (818.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5155327  bytes 818212618 (818.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7fa2c40518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fa2c40518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fa2c40518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2900695  bytes 672723845 (672.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3891348  bytes 764518939 (764.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5155385  bytes 818217745 (818.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5155385  bytes 818217745 (818.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7f96ec1518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f96ec1518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f96ec1518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2900731  bytes 672732958 (672.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3891413  bytes 764529173 (764.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5155420  bytes 818220215 (818.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5155420  bytes 818220215 (818.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7faa439518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7faa439518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7faa439518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2900765  bytes 672740075 (672.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3891466  bytes 764535582 (764.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5155472  bytes 818224731 (818.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5155472  bytes 818224731 (818.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7f8de5f518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f8de5f518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f8de5f518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2900784  bytes 672744934 (672.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3891503  bytes 764540647 (764.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5155504  bytes 818226927 (818.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5155504  bytes 818226927 (818.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7f81c6f518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f81c6f518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f81c6f518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2900804  bytes 672749973 (672.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3891542  bytes 764545844 (764.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5155534  bytes 818229015 (818.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5155534  bytes 818229015 (818.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7f90a93518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f90a93518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f90a93518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2900864  bytes 672761471 (672.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3891623  bytes 764557021 (764.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5155597  bytes 818234461 (818.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5155597  bytes 818234461 (818.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7f7a855518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f7a855518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f7a855518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2900899  bytes 672770352 (672.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3891685  bytes 764567005 (764.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5155636  bytes 818237163 (818.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5155636  bytes 818237163 (818.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7f854a04a8>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f854a04a8>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f854a04a8>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2900933  bytes 672777534 (672.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3891737  bytes 764573305 (764.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5155688  bytes 818241703 (818.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5155688  bytes 818241703 (818.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7fac779518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fac779518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fac779518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2900955  bytes 672782669 (672.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3891777  bytes 764578716 (764.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5155727  bytes 818244311 (818.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5155727  bytes 818244311 (818.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7fab517518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fab517518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fab517518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2900980  bytes 672788224 (672.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3891819  bytes 764584163 (764.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5155758  bytes 818246467 (818.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5155758  bytes 818246467 (818.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7f858ce518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f858ce518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f858ce518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2901034  bytes 672799273 (672.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3891894  bytes 764595207 (764.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5155817  bytes 818251637 (818.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5155817  bytes 818251637 (818.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7f89b38518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f89b38518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f89b38518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2901059  bytes 672804956 (672.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3891933  bytes 764600500 (764.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5155851  bytes 818253810 (818.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5155851  bytes 818253810 (818.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7fa21a9518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fa21a9518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fa21a9518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2901107  bytes 672816014 (672.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3892011  bytes 764611714 (764.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5155908  bytes 818258854 (818.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5155908  bytes 818258854 (818.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7f8a43c4a8>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f8a43c4a8>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f8a43c4a8>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2901128  bytes 672821136 (672.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3892052  bytes 764617297 (764.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5155951  bytes 818261748 (818.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5155951  bytes 818261748 (818.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7f87b584a8>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f87b584a8>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f87b584a8>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2901153  bytes 672826740 (672.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3892095  bytes 764622879 (764.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5155981  bytes 818263872 (818.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5155981  bytes 818263872 (818.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7f80544518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f80544518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f80544518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2901207  bytes 672837598 (672.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3892168  bytes 764633439 (764.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5156046  bytes 818269442 (818.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5156046  bytes 818269442 (818.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7fb3700518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fb3700518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fb3700518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2901230  bytes 672843140 (672.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3892210  bytes 764638924 (764.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5156082  bytes 818271870 (818.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5156082  bytes 818271870 (818.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7f9ff9b518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f9ff9b518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f9ff9b518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2901261  bytes 672849914 (672.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3892259  bytes 764644902 (764.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5156136  bytes 818276574 (818.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5156136  bytes 818276574 (818.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7fa0897518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fa0897518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fa0897518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2901305  bytes 672859610 (672.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3892331  bytes 764655745 (764.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5156186  bytes 818279956 (818.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5156186  bytes 818279956 (818.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7f90001518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f90001518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f90001518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2901323  bytes 672864501 (672.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3892368  bytes 764661070 (764.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5156216  bytes 818282044 (818.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5156216  bytes 818282044 (818.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7facc0e518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7facc0e518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7facc0e518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2901374  bytes 672875270 (672.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3892435  bytes 764671146 (764.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5156278  bytes 818287410 (818.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5156278  bytes 818287410 (818.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7fb0581518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fb0581518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fb0581518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2901402  bytes 672881105 (672.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3892479  bytes 764676757 (764.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5156314  bytes 818289817 (818.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5156314  bytes 818289817 (818.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7f86ab44a8>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f86ab44a8>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f86ab44a8>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2901430  bytes 672887579 (672.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3892523  bytes 764682345 (764.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5156359  bytes 818293981 (818.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5156359  bytes 818293981 (818.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7fa336a518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fa336a518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fa336a518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2901454  bytes 672893090 (672.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3892563  bytes 764687716 (764.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5156403  bytes 818296791 (818.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5156403  bytes 818296791 (818.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7f8beeb518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f8beeb518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f8beeb518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2901490  bytes 672901911 (672.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3892626  bytes 764697818 (764.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5156440  bytes 818299385 (818.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5156440  bytes 818299385 (818.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7f894f4518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f894f4518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f894f4518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2901549  bytes 672913629 (672.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3892709  bytes 764709559 (764.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5156508  bytes 818305157 (818.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5156508  bytes 818305157 (818.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7fa1b1b4a8>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fa1b1b4a8>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fa1b1b4a8>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2901579  bytes 672919960 (672.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3892755  bytes 764715382 (764.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5156544  bytes 818307564 (818.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5156544  bytes 818307564 (818.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7fa329a518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fa329a518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fa329a518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2901607  bytes 672926370 (672.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3892801  bytes 764721138 (764.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5156584  bytes 818311428 (818.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5156584  bytes 818311428 (818.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7fb33554a8>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fb33554a8>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fb33554a8>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2901627  bytes 672931624 (672.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3892839  bytes 764726396 (764.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5156634  bytes 818314742 (818.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5156634  bytes 818314742 (818.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7fa407b518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fa407b518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fa407b518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2901646  bytes 672936555 (672.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3892875  bytes 764731603 (764.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5156663  bytes 818316758 (818.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5156663  bytes 818316758 (818.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7f968bc518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f968bc518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f968bc518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2901701  bytes 672947631 (672.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3892949  bytes 764742236 (764.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5156740  bytes 818323066 (818.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5156740  bytes 818323066 (818.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7fa863b4a8>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fa863b4a8>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fa863b4a8>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2901742  bytes 672957298 (672.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3893016  bytes 764752704 (764.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5156784  bytes 818326126 (818.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5156784  bytes 818326126 (818.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7fb4719518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fb4719518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fb4719518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2901770  bytes 672963630 (672.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3893063  bytes 764758544 (764.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5156821  bytes 818329848 (818.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5156821  bytes 818329848 (818.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7f937e9518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f937e9518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f937e9518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2901795  bytes 672969626 (672.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3893106  bytes 764764018 (764.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5156875  bytes 818333356 (818.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5156875  bytes 818333356 (818.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7f8ca37518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f8ca37518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f8ca37518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2901818  bytes 672974717 (672.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3893142  bytes 764769281 (764.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5156895  bytes 818334726 (818.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5156895  bytes 818334726 (818.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7f97dfb518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f97dfb518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f97dfb518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2901874  bytes 672985954 (672.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3893221  bytes 764780369 (764.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5156984  bytes 818341782 (818.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5156984  bytes 818341782 (818.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7f99fba518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f99fba518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f99fba518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2901915  bytes 672995626 (672.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3893289  bytes 764790928 (764.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5157029  bytes 818344826 (818.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5157029  bytes 818344826 (818.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7f89131518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f89131518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f89131518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2901939  bytes 673001572 (673.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3893332  bytes 764796550 (764.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5157059  bytes 818347992 (818.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5157059  bytes 818347992 (818.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7faf04d4a8>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7faf04d4a8>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7faf04d4a8>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2901966  bytes 673007503 (673.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3893377  bytes 764802127 (764.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5157113  bytes 818351500 (818.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5157113  bytes 818351500 (818.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7fb4cad518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fb4cad518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fb4cad518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2901989  bytes 673012630 (673.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3893417  bytes 764807778 (764.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5157140  bytes 818353396 (818.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5157140  bytes 818353396 (818.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7fb1089518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fb1089518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fb1089518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2902045  bytes 673023767 (673.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3893491  bytes 764818384 (764.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5157212  bytes 818359339 (818.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5157212  bytes 818359339 (818.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7f9673f518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f9673f518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f9673f518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2902087  bytes 673033623 (673.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3893561  bytes 764829083 (764.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5157257  bytes 818362367 (818.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5157257  bytes 818362367 (818.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7fb1ff2518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fb1ff2518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fb1ff2518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2902111  bytes 673039537 (673.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3893603  bytes 764834574 (764.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5157293  bytes 818365979 (818.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5157293  bytes 818365979 (818.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7fa88a1518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fa88a1518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fa88a1518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2902136  bytes 673045296 (673.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3893645  bytes 764840004 (764.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5157344  bytes 818369327 (818.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5157344  bytes 818369327 (818.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7f99d174a8>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f99d174a8>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f99d174a8>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2902159  bytes 673050382 (673.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3893685  bytes 764845489 (764.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5157376  bytes 818371561 (818.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5157376  bytes 818371561 (818.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7f7f43e518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f7f43e518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f7f43e518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2902214  bytes 673061518 (673.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3893763  bytes 764856396 (764.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5157445  bytes 818377389 (818.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5157445  bytes 818377389 (818.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7fa5ff5518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fa5ff5518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fa5ff5518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2902259  bytes 673071380 (673.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3893836  bytes 764867298 (764.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5157497  bytes 818380918 (818.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5157497  bytes 818380918 (818.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7fa376d518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fa376d518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fa376d518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2902284  bytes 673077354 (673.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3893880  bytes 764872898 (764.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5157537  bytes 818384754 (818.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5157537  bytes 818384754 (818.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7fa7895518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fa7895518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fa7895518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2902310  bytes 673082955 (673.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3893923  bytes 764878373 (764.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5157581  bytes 818387712 (818.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5157581  bytes 818387712 (818.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7f9ba2d4a8>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f9ba2d4a8>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f9ba2d4a8>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2902332  bytes 673088243 (673.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3893967  bytes 764884453 (764.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5157613  bytes 818389900 (818.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5157613  bytes 818389900 (818.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7f9ed84518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f9ed84518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f9ed84518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2902392  bytes 673099824 (673.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3894045  bytes 764895463 (764.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5157677  bytes 818395379 (818.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5157677  bytes 818395379 (818.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7f83f66518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f83f66518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f83f66518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2902427  bytes 673108744 (673.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3894111  bytes 764905714 (764.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5157723  bytes 818398460 (818.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5157723  bytes 818398460 (818.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7fa07ec518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fa07ec518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fa07ec518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2902451  bytes 673114722 (673.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3894156  bytes 764911440 (764.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5157762  bytes 818402252 (818.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5157762  bytes 818402252 (818.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7fb13de4a8>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fb13de4a8>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fb13de4a8>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2902475  bytes 673120397 (673.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3894196  bytes 764916739 (764.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5157804  bytes 818405040 (818.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5157804  bytes 818405040 (818.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7f93cef518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f93cef518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f93cef518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2902496  bytes 673125512 (673.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3894234  bytes 764922054 (764.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5157843  bytes 818407668 (818.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5157843  bytes 818407668 (818.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7f7707d518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f7707d518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f7707d518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2902555  bytes 673136716 (673.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3894308  bytes 764932951 (764.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5157907  bytes 818413146 (818.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5157907  bytes 818413146 (818.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7fa3ced4a8>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fa3ced4a8>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fa3ced4a8>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2902596  bytes 673146203 (673.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3894378  bytes 764943489 (764.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5157955  bytes 818416355 (818.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5157955  bytes 818416355 (818.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7fa9b82518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fa9b82518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fa9b82518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2902623  bytes 673152530 (673.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3894424  bytes 764949338 (764.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5157994  bytes 818420159 (818.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5157994  bytes 818420159 (818.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7fa2a8c518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fa2a8c518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fa2a8c518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2902648  bytes 673158137 (673.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3894465  bytes 764954652 (764.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5158035  bytes 818422895 (818.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5158035  bytes 818422895 (818.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7f94dd6518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f94dd6518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f94dd6518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2902671  bytes 673163344 (673.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3894503  bytes 764959868 (764.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5158069  bytes 818425097 (818.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5158069  bytes 818425097 (818.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7f970b2518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f970b2518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f970b2518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2902732  bytes 673174734 (673.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3894586  bytes 764971550 (764.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5158134  bytes 818430743 (818.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5158134  bytes 818430743 (818.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7f8bedb518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f8bedb518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f8bedb518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2902759  bytes 673180509 (673.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3894629  bytes 764977088 (764.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5158183  bytes 818433976 (818.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5158183  bytes 818433976 (818.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7f8c43a518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f8c43a518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f8c43a518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2902802  bytes 673190634 (673.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3894702  bytes 764987869 (764.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5158234  bytes 818438688 (818.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5158234  bytes 818438688 (818.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7f7c4dc518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f7c4dc518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f7c4dc518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2902824  bytes 673196212 (673.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3894744  bytes 764993496 (764.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5158274  bytes 818441394 (818.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5158274  bytes 818441394 (818.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7fb3738518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fb3738518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fb3738518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2902848  bytes 673201633 (673.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3894784  bytes 764998886 (764.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5158318  bytes 818444332 (818.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5158318  bytes 818444332 (818.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7fb5db2518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fb5db2518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fb5db2518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2902907  bytes 673212972 (673.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3894858  bytes 765010231 (765.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5158382  bytes 818449874 (818.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5158382  bytes 818449874 (818.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7fb2826518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fb2826518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fb2826518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2902933  bytes 673218843 (673.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3894902  bytes 765015859 (765.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5158418  bytes 818452291 (818.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5158418  bytes 818452291 (818.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7fa2586518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fa2586518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fa2586518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2902961  bytes 673225312 (673.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3894948  bytes 765021616 (765.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5158468  bytes 818456755 (818.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5158468  bytes 818456755 (818.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7f7d367518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f7d367518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f7d367518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2903000  bytes 673234644 (673.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3895015  bytes 765031914 (765.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5158509  bytes 818459597 (818.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5158509  bytes 818459597 (818.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7fa339a518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fa339a518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fa339a518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2903026  bytes 673240597 (673.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3895059  bytes 765037686 (765.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5158556  bytes 818462685 (818.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5158556  bytes 818462685 (818.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7f9a283518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f9a283518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f9a283518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2903079  bytes 673251383 (673.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3895131  bytes 765048274 (765.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5158614  bytes 818467833 (818.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5158614  bytes 818467833 (818.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7f87b9a518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f87b9a518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f87b9a518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2903105  bytes 673257470 (673.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3895173  bytes 765053786 (765.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5158646  bytes 818469912 (818.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5158646  bytes 818469912 (818.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7f7e1e1518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f7e1e1518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f7e1e1518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2903132  bytes 673263715 (673.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3895217  bytes 765059453 (765.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5158688  bytes 818473876 (818.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5158688  bytes 818473876 (818.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7fb0ba5518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fb0ba5518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fb0ba5518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2903153  bytes 673268867 (673.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3895256  bytes 765064722 (765.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5158718  bytes 818475964 (818.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5158718  bytes 818475964 (818.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7f861a0518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f861a0518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f861a0518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2903193  bytes 673278319 (673.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3895324  bytes 765074929 (765.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5158776  bytes 818479826 (818.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5158776  bytes 818479826 (818.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7f8d2a4518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f8d2a4518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f8d2a4518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2903251  bytes 673292339 (673.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3895402  bytes 765086344 (765.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5158835  bytes 818485060 (818.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5158835  bytes 818485060 (818.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7fb5e36518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fb5e36518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fb5e36518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2903274  bytes 673297882 (673.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3895443  bytes 765091765 (765.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5158873  bytes 818487616 (818.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5158873  bytes 818487616 (818.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7fabdcf518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fabdcf518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fabdcf518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2903298  bytes 673303912 (673.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3895484  bytes 765097208 (765.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5158912  bytes 818491444 (818.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5158912  bytes 818491444 (818.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7fabb05518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fabb05518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fabb05518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2903318  bytes 673308953 (673.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3895521  bytes 765102312 (765.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5158948  bytes 818493908 (818.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5158948  bytes 818493908 (818.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7fac4de518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fac4de518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fac4de518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2903346  bytes 673314739 (673.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3895566  bytes 765107897 (765.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5159008  bytes 818497834 (818.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5159008  bytes 818497834 (818.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7faa77f518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7faa77f518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7faa77f518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2903406  bytes 673326036 (673.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3895646  bytes 765119260 (765.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5159075  bytes 818503556 (818.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5159075  bytes 818503556 (818.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7fb3c83518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fb3c83518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fb3c83518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2903456  bytes 673336332 (673.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3895724  bytes 765130488 (765.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5159117  bytes 818506499 (818.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5159117  bytes 818506499 (818.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7f858b1518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f858b1518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f858b1518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2903485  bytes 673343056 (673.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3895771  bytes 765136583 (765.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5159156  bytes 818510311 (818.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5159156  bytes 818510311 (818.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7f9e041518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f9e041518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f9e041518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2903503  bytes 673347891 (673.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3895804  bytes 765141369 (765.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5159180  bytes 818511913 (818.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5159180  bytes 818511913 (818.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7fa620d518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fa620d518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fa620d518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2903528  bytes 673353546 (673.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3895849  bytes 765149500 (765.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5159229  bytes 818515121 (818.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5159229  bytes 818515121 (818.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7f99edd518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f99edd518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f99edd518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2903568  bytes 673360644 (673.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3895906  bytes 765156655 (765.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5159287  bytes 818520189 (818.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5159287  bytes 818520189 (818.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7fb6021518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fb6021518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fb6021518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2903589  bytes 673365771 (673.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3895944  bytes 765161783 (765.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5159325  bytes 818522737 (818.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5159325  bytes 818522737 (818.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7f7fc3b518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f7fc3b518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f7fc3b518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2903634  bytes 673376002 (673.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3896020  bytes 765173000 (765.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5159369  bytes 818526935 (818.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5159369  bytes 818526935 (818.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7fa4e0c518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fa4e0c518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fa4e0c518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2903650  bytes 673380765 (673.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3896054  bytes 765177848 (765.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5159399  bytes 818529023 (818.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5159399  bytes 818529023 (818.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7faa2e4518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7faa2e4518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7faa2e4518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2903702  bytes 673391139 (673.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3896124  bytes 765188266 (765.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5159481  bytes 818534220 (818.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5159481  bytes 818534220 (818.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7fafd4a518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fafd4a518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fafd4a518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2903738  bytes 673398005 (673.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3896177  bytes 765195791 (765.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5159533  bytes 818538952 (818.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5159533  bytes 818538952 (818.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7fa0d65518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fa0d65518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fa0d65518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2903757  bytes 673403052 (673.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3896213  bytes 765200815 (765.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5159557  bytes 818540660 (818.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5159557  bytes 818540660 (818.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7fa5783518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fa5783518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fa5783518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2903802  bytes 673413351 (673.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3896285  bytes 765211640 (765.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5159610  bytes 818545366 (818.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5159610  bytes 818545366 (818.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7fa4c58518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fa4c58518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fa4c58518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2903825  bytes 673418576 (673.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3896326  bytes 765217060 (765.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5159645  bytes 818547798 (818.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5159645  bytes 818547798 (818.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7fb4c0a518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fb4c0a518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fb4c0a518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2903879  bytes 673429141 (673.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3896398  bytes 765227505 (765.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5159719  bytes 818552571 (818.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5159719  bytes 818552571 (818.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7f9789e518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f9789e518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f9789e518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2903913  bytes 673435943 (673.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3896451  bytes 765233896 (765.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5159776  bytes 818557587 (818.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5159776  bytes 818557587 (818.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7f83a4a518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f83a4a518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f83a4a518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2903935  bytes 673440969 (673.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3896491  bytes 765239215 (765.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5159800  bytes 818559325 (818.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5159800  bytes 818559325 (818.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7f9741d518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f9741d518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f9741d518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2903981  bytes 673451516 (673.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3896570  bytes 765250522 (765.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5159857  bytes 818564317 (818.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5159857  bytes 818564317 (818.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7f9fc1e518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f9fc1e518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f9fc1e518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2904004  bytes 673456779 (673.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3896608  bytes 765255790 (765.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5159890  bytes 818566593 (818.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5159890  bytes 818566593 (818.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7f9d6a9518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f9d6a9518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7f9d6a9518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/28092025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2904057  bytes 673467372 (673.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 3896679  bytes 765266441 (765.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5159960  bytes 818571104 (818.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5159960  bytes 818571104 (818.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/09/28/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 170, in _new_conn
    (self._dns_host, self.port), self.timeout, **extra_kw
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 96, in create_connection
    raise err
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/connection.py", line 86, in create_connection
    sock.connect(sa)
TimeoutError: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 706, in urlopen
    chunked=chunked,
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 394, in _make_request
    conn.request(method, url, **httplib_request_kw)
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 234, in request
    super(HTTPConnection, self).request(method, url, body=body, headers=headers)
  File "/usr/lib/python3.6/http/client.py", line 1285, in request
    self._send_request(method, url, body, headers, encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1331, in _send_request
    self.endheaders(body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1280, in endheaders
    self._send_output(message_body, encode_chunked=encode_chunked)
  File "/usr/lib/python3.6/http/client.py", line 1046, in _send_output
    self.send(msg)
  File "/usr/lib/python3.6/http/client.py", line 984, in send
    self.connect()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 200, in connect
    conn = self._new_conn()
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connection.py", line 182, in _new_conn
    self, "Failed to establish a new connection: %s" % e
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at 0x7fad1ba518>: Failed to establish a new connection: [Errno 110] Connection timed out

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 449, in send
    timeout=timeout
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/connectionpool.py", line 756, in urlopen
    method, url, error=e, _pool=self, _stacktrace=sys.exc_info()[2]
  File "/home/nano/.local/lib/python3.6/site-packages/urllib3/util/retry.py", line 574, in increment
    raise MaxRetryError(_pool, url, error or ResponseError(cause))
urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fad1ba518>: Failed to establish a new connection: [Errno 110] Connection timed out',))

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 400, in <module>
    getAllInfosJetson(x.verbose, x.port, x.pause, x.user_up, x.basename, x.token, x.basefolder, x.host_fotonower, x.timeout, x.date, home)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 82, in getAllInfosJetson
    insertInfoOnDB(user_up, port, hostname, basename, token, pause, nbr_pic_colors, space, lsblk, version, basefolder, host_fotonower, uptime, ip, public_ip,  ram_cpu, uptime_day, verbose)
  File "/home/nano/workarea/git/raspi-fotonower-x/python/daily_activity_report.py", line 205, in insertInfoOnDB
    r = requests.post(requete, data=data)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 119, in post
    return request('post', url, data=data, json=json, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/api.py", line 61, in request
    return session.request(method=method, url=url, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 542, in request
    resp = self.send(prep, **send_kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in send
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 677, in <listcomp>
    history = [resp for resp in gen]
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 245, in resolve_redirects
    **adapter_kwargs
  File "/home/nano/.local/lib/python3.6/site-packages/requests/sessions.py", line 655, in send
    r = adapter.send(request, **kwargs)
  File "/home/nano/.local/lib/python3.6/site-packages/requests/adapters.py", line 516, in send
    raise ConnectionError(e, request=request)
requests.exceptions.ConnectionError: HTTPConnectionPool(host='assistance.fotonower.com', port=80): Max retries exceeded with url: /?url=marlene (Caused by NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fad1ba518>: Failed to establish a new connection: [Errno 110] Connection timed out',))
