erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2986212  bytes 692164758 (692.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4016584  bytes 785807901 (785.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5297905  bytes 837852391 (837.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5297905  bytes 837852391 (837.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/01/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2986300  bytes 692184233 (692.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4016698  bytes 785827787 (785.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5298037  bytes 837872003 (837.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5298037  bytes 837872003 (837.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/01/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2986386  bytes 692202433 (692.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4016800  bytes 785846868 (785.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5298166  bytes 837890243 (837.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5298166  bytes 837890243 (837.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/01/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2986444  bytes 692215928 (692.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4016879  bytes 785861351 (785.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5298283  bytes 837907707 (837.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5298283  bytes 837907707 (837.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/01/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2986515  bytes 692230928 (692.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4016966  bytes 785877569 (785.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5298416  bytes 837927359 (837.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5298416  bytes 837927359 (837.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/01/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2986567  bytes 692244100 (692.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4017042  bytes 785891771 (785.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5298529  bytes 837944553 (837.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5298529  bytes 837944553 (837.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/01/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2986654  bytes 692263047 (692.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4017151  bytes 785911204 (785.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5298671  bytes 837964689 (837.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5298671  bytes 837964689 (837.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/01/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2986741  bytes 692281281 (692.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4017256  bytes 785930450 (785.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5298814  bytes 837983693 (837.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5298814  bytes 837983693 (837.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/01/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2986799  bytes 692294753 (692.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4017332  bytes 785944685 (785.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5298929  bytes 838001015 (838.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5298929  bytes 838001015 (838.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/01/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2986866  bytes 692309564 (692.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4017425  bytes 785960235 (785.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5299063  bytes 838020757 (838.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5299063  bytes 838020757 (838.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/01/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2986924  bytes 692322992 (692.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4017502  bytes 785974516 (785.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5299174  bytes 838037847 (838.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5299174  bytes 838037847 (838.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/01/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2987005  bytes 692341694 (692.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4017611  bytes 785993988 (785.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5299305  bytes 838057473 (838.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5299305  bytes 838057473 (838.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/01/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2987086  bytes 692359580 (692.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4017711  bytes 786012844 (786.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5299437  bytes 838075905 (838.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5299437  bytes 838075905 (838.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/01/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2987145  bytes 692373116 (692.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4017790  bytes 786027281 (786.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5299554  bytes 838093307 (838.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5299554  bytes 838093307 (838.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/01/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2987260  bytes 692398818 (692.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4017933  bytes 786053670 (786.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5299794  bytes 838130747 (838.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5299794  bytes 838130747 (838.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/01/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2987372  bytes 692425832 (692.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4018074  bytes 786081581 (786.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5300042  bytes 838171229 (838.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5300042  bytes 838171229 (838.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/01/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2987451  bytes 692444249 (692.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4018180  bytes 786100798 (786.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5300170  bytes 838190613 (838.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5300170  bytes 838190613 (838.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/01/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2987529  bytes 692461917 (692.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4018283  bytes 786119914 (786.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5300299  bytes 838208877 (838.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5300299  bytes 838208877 (838.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/01/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2987591  bytes 692475653 (692.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4018363  bytes 786134413 (786.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5300411  bytes 838226003 (838.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5300411  bytes 838226003 (838.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/01/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
b'Error on request'
Token e243aac39fb012c084cfefeb2a6a3641 is maybe invalid 
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2987663  bytes 692491124 (692.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4018457  bytes 786150174 (786.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5300543  bytes 838245664 (838.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5300543  bytes 838245664 (838.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/01/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2987724  bytes 692504952 (692.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4018539  bytes 786164849 (786.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5300656  bytes 838262882 (838.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5300656  bytes 838262882 (838.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/01/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2987969  bytes 692536056 (692.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4018958  bytes 786616879 (786.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5300901  bytes 838702113 (838.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5300901  bytes 838702113 (838.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/01/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2988051  bytes 692554037 (692.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4019060  bytes 786635914 (786.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5301031  bytes 838720430 (838.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5301031  bytes 838720430 (838.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/01/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2988110  bytes 692567533 (692.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4019141  bytes 786650531 (786.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5301142  bytes 838737520 (838.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5301142  bytes 838737520 (838.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/01/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2988178  bytes 692582364 (692.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4019237  bytes 786666203 (786.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5301283  bytes 838757626 (838.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5301283  bytes 838757626 (838.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/01/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
b'Error on request'
Token e243aac39fb012c084cfefeb2a6a3641 is maybe invalid 
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2988235  bytes 692595799 (692.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4019316  bytes 786680668 (786.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5301397  bytes 838774896 (838.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5301397  bytes 838774896 (838.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/01/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2988323  bytes 692614859 (692.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4019432  bytes 786700672 (786.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5301532  bytes 838794706 (838.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5301532  bytes 838794706 (838.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/01/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2988386  bytes 692628798 (692.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4019516  bytes 786715650 (786.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5301660  bytes 838812755 (838.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5301660  bytes 838812755 (838.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/01/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2988468  bytes 692646800 (692.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4019617  bytes 786734536 (786.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5301788  bytes 838830929 (838.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5301788  bytes 838830929 (838.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/01/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2988536  bytes 692661755 (692.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4019714  bytes 786750350 (786.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5301923  bytes 838850688 (838.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5301923  bytes 838850688 (838.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/01/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2988606  bytes 692679174 (692.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4019807  bytes 786766505 (786.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5302053  bytes 838869040 (838.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5302053  bytes 838869040 (838.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/01/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2988694  bytes 692698376 (692.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4019920  bytes 786786219 (786.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5302180  bytes 838888320 (838.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5302180  bytes 838888320 (838.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/01/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2988754  bytes 692712024 (692.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4019997  bytes 786800549 (786.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5302291  bytes 838905256 (838.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5302291  bytes 838905256 (838.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/01/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2988844  bytes 692730440 (692.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4020106  bytes 786820198 (786.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5302432  bytes 838924181 (838.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5302432  bytes 838924181 (838.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/01/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2988913  bytes 692745387 (692.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4020204  bytes 786836202 (786.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5302577  bytes 838944672 (838.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5302577  bytes 838944672 (838.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/01/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2988971  bytes 692758898 (692.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4020282  bytes 786850569 (786.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5302691  bytes 838961918 (838.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5302691  bytes 838961918 (838.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/01/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2989051  bytes 692777466 (692.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4020389  bytes 786869901 (786.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5302816  bytes 838981052 (838.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5302816  bytes 838981052 (838.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/01/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2989113  bytes 692791237 (692.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4020473  bytes 786884741 (786.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5302930  bytes 838998298 (838.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5302930  bytes 838998298 (838.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/01/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2989195  bytes 692809167 (692.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4020577  bytes 786903911 (786.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5303057  bytes 839016471 (839.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5303057  bytes 839016471 (839.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/01/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2989261  bytes 692824108 (692.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4020672  bytes 786919621 (786.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5303202  bytes 839036985 (839.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5303202  bytes 839036985 (839.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/01/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2989314  bytes 692837296 (692.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4020747  bytes 786933788 (786.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5303305  bytes 839053505 (839.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5303305  bytes 839053505 (839.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/01/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2989379  bytes 692852111 (692.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4020839  bytes 786949338 (786.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5303428  bytes 839072535 (839.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5303428  bytes 839072535 (839.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/01/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2989456  bytes 692869732 (692.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4020944  bytes 786968433 (786.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5303556  bytes 839090725 (839.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5303556  bytes 839090725 (839.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/01/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2989538  bytes 692887624 (692.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4021047  bytes 786987599 (786.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5303686  bytes 839109017 (839.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5303686  bytes 839109017 (839.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/01/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2989611  bytes 692902955 (692.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4021141  bytes 787003229 (787.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5303831  bytes 839129354 (839.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5303831  bytes 839129354 (839.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/01/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2989667  bytes 692916386 (692.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4021219  bytes 787017565 (787.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5303949  bytes 839146854 (839.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5303949  bytes 839146854 (839.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/01/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
b'Error on request'
Token e243aac39fb012c084cfefeb2a6a3641 is maybe invalid 
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2989735  bytes 692931082 (692.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4021308  bytes 787032875 (787.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5304073  bytes 839165968 (839.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5304073  bytes 839165968 (839.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/01/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2989814  bytes 692948827 (692.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4021411  bytes 787051798 (787.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5304210  bytes 839184604 (839.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5304210  bytes 839184604 (839.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/01/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2989900  bytes 692966841 (692.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4021512  bytes 787070734 (787.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5304348  bytes 839203313 (839.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5304348  bytes 839203313 (839.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/01/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2989965  bytes 692981508 (692.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4021601  bytes 787085954 (787.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5304481  bytes 839222965 (839.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5304481  bytes 839222965 (839.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/01/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2990024  bytes 692995020 (692.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4021681  bytes 787100455 (787.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5304614  bytes 839241260 (839.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5304614  bytes 839241260 (839.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/01/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2990089  bytes 693009531 (693.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4021767  bytes 787115489 (787.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5304738  bytes 839260266 (839.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5304738  bytes 839260266 (839.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/01/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2990165  bytes 693027171 (693.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4021866  bytes 787134147 (787.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5304857  bytes 839277978 (839.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5304857  bytes 839277978 (839.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/01/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2990243  bytes 693044980 (693.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4021968  bytes 787153208 (787.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5304993  bytes 839296607 (839.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5304993  bytes 839296607 (839.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/01/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2990308  bytes 693059784 (693.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4022056  bytes 787168431 (787.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5305124  bytes 839316213 (839.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5305124  bytes 839316213 (839.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/01/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2990361  bytes 693072932 (693.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4022134  bytes 787182800 (787.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5305242  bytes 839333730 (839.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5305242  bytes 839333730 (839.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/01/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2990423  bytes 693087327 (693.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4022218  bytes 787197686 (787.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5305362  bytes 839352528 (839.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5305362  bytes 839352528 (839.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/01/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2990496  bytes 693104772 (693.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4022320  bytes 787216567 (787.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5305492  bytes 839370874 (839.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5305492  bytes 839370874 (839.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/01/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2990572  bytes 693122368 (693.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4022420  bytes 787235411 (787.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5305628  bytes 839389503 (839.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5305628  bytes 839389503 (839.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/01/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2990633  bytes 693136792 (693.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4022501  bytes 787250180 (787.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5305758  bytes 839409057 (839.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5305758  bytes 839409057 (839.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/01/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2990697  bytes 693153851 (693.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4022591  bytes 787266067 (787.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5305887  bytes 839427252 (839.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5305887  bytes 839427252 (839.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2990760  bytes 693168718 (693.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4022680  bytes 787281329 (787.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5306009  bytes 839446262 (839.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5306009  bytes 839446262 (839.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2990833  bytes 693186115 (693.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4022783  bytes 787300272 (787.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5306138  bytes 839464494 (839.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5306138  bytes 839464494 (839.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2990911  bytes 693203749 (693.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4022880  bytes 787318952 (787.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5306262  bytes 839482463 (839.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5306262  bytes 839482463 (839.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2990974  bytes 693218337 (693.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4022966  bytes 787334039 (787.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5306386  bytes 839501611 (839.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5306386  bytes 839501611 (839.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2991028  bytes 693231585 (693.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4023045  bytes 787348518 (787.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5306507  bytes 839519294 (839.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5306507  bytes 839519294 (839.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2991087  bytes 693245840 (693.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4023133  bytes 787363689 (787.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5306628  bytes 839538168 (839.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5306628  bytes 839538168 (839.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2991159  bytes 693263102 (693.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4023233  bytes 787382360 (787.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5306757  bytes 839556400 (839.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5306757  bytes 839556400 (839.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2991214  bytes 693276441 (693.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4023310  bytes 787396807 (787.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5306871  bytes 839573684 (839.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5306871  bytes 839573684 (839.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2991279  bytes 693290710 (693.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4023390  bytes 787410975 (787.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5306957  bytes 839585131 (839.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5306957  bytes 839585131 (839.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2991337  bytes 693304158 (693.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4023476  bytes 787425905 (787.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5307092  bytes 839603698 (839.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5307092  bytes 839603698 (839.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2991396  bytes 693318369 (693.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4023561  bytes 787440798 (787.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5307216  bytes 839622704 (839.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5307216  bytes 839622704 (839.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2991472  bytes 693335993 (693.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4023661  bytes 787459551 (787.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5307343  bytes 839640882 (839.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5307343  bytes 839640882 (839.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2991526  bytes 693349281 (693.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4023734  bytes 787473559 (787.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5307449  bytes 839657542 (839.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5307449  bytes 839657542 (839.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2991613  bytes 693368188 (693.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4023842  bytes 787493221 (787.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5307598  bytes 839678286 (839.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5307598  bytes 839678286 (839.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2991669  bytes 693381520 (693.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4023925  bytes 787507917 (787.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5307732  bytes 839696764 (839.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5307732  bytes 839696764 (839.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2991740  bytes 693396524 (693.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4024012  bytes 787523059 (787.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5307861  bytes 839716174 (839.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5307861  bytes 839716174 (839.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2991814  bytes 693414155 (693.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4024112  bytes 787541755 (787.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5307986  bytes 839734078 (839.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5307986  bytes 839734078 (839.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2991872  bytes 693427547 (693.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4024189  bytes 787556091 (787.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5308095  bytes 839751064 (839.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5308095  bytes 839751064 (839.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2991972  bytes 693447714 (693.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4024308  bytes 787576499 (787.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5308249  bytes 839772045 (839.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5308249  bytes 839772045 (839.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2992028  bytes 693461448 (693.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4024389  bytes 787591347 (787.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5308371  bytes 839789770 (839.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5308371  bytes 839789770 (839.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2992085  bytes 693475567 (693.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4024470  bytes 787606024 (787.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5308491  bytes 839808568 (839.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5308491  bytes 839808568 (839.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2992144  bytes 693489095 (693.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4024549  bytes 787620500 (787.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5308609  bytes 839826098 (839.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5308609  bytes 839826098 (839.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2992216  bytes 693506289 (693.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4024649  bytes 787639151 (787.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5308731  bytes 839843914 (839.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5308731  bytes 839843914 (839.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2992304  bytes 693525349 (693.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4024761  bytes 787658982 (787.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5308883  bytes 839864732 (839.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5308883  bytes 839864732 (839.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2992359  bytes 693538759 (693.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4024841  bytes 787673450 (787.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5308997  bytes 839882038 (839.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5308997  bytes 839882038 (839.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2992419  bytes 693553018 (693.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4024927  bytes 787688477 (787.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5309132  bytes 839901618 (839.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5309132  bytes 839901618 (839.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2992477  bytes 693566466 (693.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4025007  bytes 787702927 (787.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5309249  bytes 839919056 (839.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5309249  bytes 839919056 (839.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2992550  bytes 693583890 (693.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4025107  bytes 787721676 (787.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5309379  bytes 839937390 (839.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5309379  bytes 839937390 (839.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2992637  bytes 693602923 (693.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4025219  bytes 787741632 (787.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5309523  bytes 839957792 (839.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5309523  bytes 839957792 (839.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2992700  bytes 693619772 (693.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4025301  bytes 787756918 (787.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5309648  bytes 839975752 (839.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5309648  bytes 839975752 (839.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2992769  bytes 693634865 (693.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4025391  bytes 787772216 (787.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5309775  bytes 839994977 (839.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5309775  bytes 839994977 (839.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2992825  bytes 693648374 (693.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4025475  bytes 787787074 (787.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5309896  bytes 840012695 (840.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5309896  bytes 840012695 (840.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2992904  bytes 693666174 (693.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4025577  bytes 787805926 (787.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5310026  bytes 840031003 (840.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5310026  bytes 840031003 (840.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2992995  bytes 693685689 (693.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4025689  bytes 787825790 (787.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5310177  bytes 840051826 (840.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5310177  bytes 840051826 (840.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2993054  bytes 693699193 (693.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4025767  bytes 787840127 (787.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5310295  bytes 840069280 (840.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5310295  bytes 840069280 (840.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2993116  bytes 693713604 (693.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4025856  bytes 787855412 (787.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5310434  bytes 840089164 (840.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5310434  bytes 840089164 (840.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2993168  bytes 693726612 (693.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4025932  bytes 787869698 (787.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5310548  bytes 840106374 (840.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5310548  bytes 840106374 (840.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2993241  bytes 693743926 (693.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4026031  bytes 787888351 (787.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5310672  bytes 840124310 (840.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5310672  bytes 840124310 (840.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2993326  bytes 693762826 (693.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4026141  bytes 787908006 (787.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5310824  bytes 840145247 (840.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5310824  bytes 840145247 (840.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2993384  bytes 693776373 (693.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4026218  bytes 787922317 (787.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5310941  bytes 840162649 (840.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5310941  bytes 840162649 (840.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2993442  bytes 693790531 (693.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4026303  bytes 787937233 (787.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5311075  bytes 840182213 (840.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5311075  bytes 840182213 (840.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2993502  bytes 693804147 (693.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4026386  bytes 787951973 (787.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5311194  bytes 840199779 (840.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5311194  bytes 840199779 (840.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2993581  bytes 693821863 (693.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4026488  bytes 787970850 (787.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5311319  bytes 840217829 (840.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5311319  bytes 840217829 (840.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2993671  bytes 693841153 (693.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4026600  bytes 787990711 (787.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5311472  bytes 840238648 (840.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5311472  bytes 840238648 (840.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2993723  bytes 693854289 (693.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4026675  bytes 788004919 (788.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5311593  bytes 840256282 (840.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5311593  bytes 840256282 (840.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2993783  bytes 693868528 (693.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4026761  bytes 788019938 (788.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5311723  bytes 840275638 (840.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5311723  bytes 840275638 (840.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2993836  bytes 693881815 (693.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4026839  bytes 788034359 (788.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5311847  bytes 840293512 (840.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5311847  bytes 840293512 (840.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2993911  bytes 693899501 (693.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4026941  bytes 788053230 (788.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5311977  bytes 840311830 (840.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5311977  bytes 840311830 (840.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2993974  bytes 693914245 (693.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4027030  bytes 788068684 (788.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5312119  bytes 840331953 (840.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5312119  bytes 840331953 (840.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2994047  bytes 693931059 (693.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4027116  bytes 788085195 (788.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5312218  bytes 840346917 (840.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5312218  bytes 840346917 (840.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2994109  bytes 693945586 (693.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4027207  bytes 788100644 (788.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5312370  bytes 840367607 (840.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5312370  bytes 840367607 (840.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2994158  bytes 693958558 (693.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4027283  bytes 788114886 (788.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5312492  bytes 840385269 (840.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5312492  bytes 840385269 (840.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2994239  bytes 693976376 (693.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4027386  bytes 788133827 (788.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5312624  bytes 840403681 (840.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5312624  bytes 840403681 (840.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2994304  bytes 693990979 (693.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4027471  bytes 788148812 (788.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5312754  bytes 840423009 (840.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5312754  bytes 840423009 (840.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2994386  bytes 694008931 (694.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4027574  bytes 788167967 (788.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5312888  bytes 840441534 (840.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5312888  bytes 840441534 (840.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2994452  bytes 694023724 (694.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4027669  bytes 788183662 (788.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5313027  bytes 840461549 (840.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5313027  bytes 840461549 (840.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2994502  bytes 694036772 (694.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4027741  bytes 788197640 (788.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5313134  bytes 840478277 (840.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5313134  bytes 840478277 (840.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2994576  bytes 694054280 (694.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4027840  bytes 788216451 (788.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5313259  bytes 840496351 (840.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5313259  bytes 840496351 (840.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2994646  bytes 694069301 (694.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4027933  bytes 788232010 (788.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5313387  bytes 840515801 (840.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5313387  bytes 840515801 (840.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2994738  bytes 694090924 (694.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4028044  bytes 788252379 (788.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5313522  bytes 840534407 (840.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5313522  bytes 840534407 (840.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2994805  bytes 694105961 (694.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4028135  bytes 788267763 (788.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5313655  bytes 840553943 (840.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5313655  bytes 840553943 (840.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2994862  bytes 694119453 (694.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4028216  bytes 788282438 (788.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5313773  bytes 840571485 (840.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5313773  bytes 840571485 (840.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2994923  bytes 694133171 (694.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4028295  bytes 788296951 (788.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5313888  bytes 840588931 (840.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5313888  bytes 840588931 (840.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
b'Error on request'
Token e243aac39fb012c084cfefeb2a6a3641 is maybe invalid 
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2995011  bytes 694152199 (694.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4028412  bytes 788317008 (788.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5314028  bytes 840609065 (840.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5314028  bytes 840609065 (840.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2995098  bytes 694170452 (694.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4028519  bytes 788336415 (788.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5314153  bytes 840627133 (840.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5314153  bytes 840627133 (840.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
b'Error on request'
Token e243aac39fb012c084cfefeb2a6a3641 is maybe invalid 
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2995166  bytes 694185198 (694.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4028609  bytes 788351794 (788.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5314279  bytes 840646267 (840.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5314279  bytes 840646267 (840.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2995225  bytes 694198634 (694.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4028687  bytes 788366200 (788.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5314397  bytes 840663759 (840.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5314397  bytes 840663759 (840.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2995282  bytes 694212146 (694.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4028769  bytes 788380898 (788.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5314514  bytes 840681197 (840.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5314514  bytes 840681197 (840.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2995367  bytes 694231090 (694.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4028883  bytes 788400761 (788.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5314653  bytes 840701319 (840.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5314653  bytes 840701319 (840.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2995445  bytes 694248722 (694.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4028985  bytes 788419726 (788.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5314786  bytes 840719767 (840.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5314786  bytes 840719767 (840.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2995508  bytes 694263213 (694.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4029067  bytes 788434509 (788.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5314903  bytes 840738445 (840.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5314903  bytes 840738445 (840.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2995566  bytes 694276783 (694.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4029150  bytes 788449223 (788.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5315024  bytes 840756118 (840.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5315024  bytes 840756118 (840.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2995622  bytes 694290103 (694.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4029229  bytes 788463691 (788.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5315133  bytes 840773104 (840.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5315133  bytes 840773104 (840.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2995707  bytes 694309215 (694.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4029344  bytes 788483632 (788.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5315279  bytes 840793722 (840.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5315279  bytes 840793722 (840.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2995788  bytes 694327185 (694.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4029449  bytes 788502945 (788.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5315412  bytes 840812194 (840.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5315412  bytes 840812194 (840.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2995850  bytes 694341672 (694.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4029538  bytes 788518264 (788.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5315534  bytes 840831096 (840.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5315534  bytes 840831096 (840.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2995872  bytes 694346502 (694.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4029573  bytes 788523174 (788.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5315561  bytes 840832894 (840.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5315561  bytes 840832894 (840.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2995894  bytes 694351287 (694.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4029606  bytes 788527887 (788.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5315583  bytes 840834490 (840.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5315583  bytes 840834490 (840.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2995937  bytes 694361130 (694.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4029676  bytes 788538585 (788.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5315632  bytes 840839074 (840.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5315632  bytes 840839074 (840.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2995978  bytes 694370192 (694.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4029726  bytes 788547439 (788.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5315664  bytes 840841273 (840.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5315664  bytes 840841273 (840.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2996003  bytes 694375865 (694.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4029763  bytes 788552534 (788.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5315690  bytes 840844209 (840.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5315690  bytes 840844209 (840.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2996022  bytes 694380443 (694.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4029794  bytes 788557084 (788.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5315717  bytes 840846008 (840.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5315717  bytes 840846008 (840.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2996039  bytes 694384933 (694.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4029823  bytes 788561538 (788.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5315733  bytes 840847160 (840.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5315733  bytes 840847160 (840.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2996086  bytes 694395100 (694.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4029894  bytes 788572181 (788.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5315778  bytes 840851432 (840.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5315778  bytes 840851432 (840.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2996132  bytes 694404337 (694.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4029949  bytes 788581445 (788.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5315812  bytes 840853735 (840.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5315812  bytes 840853735 (840.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2996177  bytes 694414782 (694.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4030012  bytes 788591684 (788.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5315886  bytes 840864938 (840.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5315886  bytes 840864938 (840.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2996219  bytes 694424324 (694.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4030075  bytes 788601806 (788.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5315966  bytes 840875263 (840.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5315966  bytes 840875263 (840.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2996258  bytes 694433773 (694.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4030132  bytes 788611551 (788.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5316030  bytes 840884682 (840.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5316030  bytes 840884682 (840.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2996325  bytes 694448779 (694.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4030230  bytes 788627480 (788.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5316127  bytes 840897491 (840.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5316127  bytes 840897491 (840.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2996424  bytes 694471162 (694.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4030347  bytes 788648243 (788.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5316265  bytes 840916306 (840.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5316265  bytes 840916306 (840.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2996486  bytes 694485611 (694.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4030431  bytes 788663187 (788.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5316379  bytes 840934662 (840.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5316379  bytes 840934662 (840.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2996546  bytes 694499293 (694.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4030518  bytes 788678300 (788.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5316513  bytes 840953177 (840.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5316513  bytes 840953177 (840.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2996607  bytes 694512949 (694.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4030597  bytes 788692751 (788.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5316622  bytes 840970225 (840.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5316622  bytes 840970225 (840.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
b'Error on request'
Token e243aac39fb012c084cfefeb2a6a3641 is maybe invalid 
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2996691  bytes 694531834 (694.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4030709  bytes 788712499 (788.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5316767  bytes 840990763 (840.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5316767  bytes 840990763 (840.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2996753  bytes 694545587 (694.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4030792  bytes 788727423 (788.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5316886  bytes 841008236 (841.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5316886  bytes 841008236 (841.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2996828  bytes 694563300 (694.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4030886  bytes 788745247 (788.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5317000  bytes 841026250 (841.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5317000  bytes 841026250 (841.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2996892  bytes 694577129 (694.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4030973  bytes 788760248 (788.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5317127  bytes 841044389 (841.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5317127  bytes 841044389 (841.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2996955  bytes 694590847 (694.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4031052  bytes 788774742 (788.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5317228  bytes 841060841 (841.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5317228  bytes 841060841 (841.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2997044  bytes 694610098 (694.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4031168  bytes 788794892 (788.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5317365  bytes 841080979 (841.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5317365  bytes 841080979 (841.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2997098  bytes 694623340 (694.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4031245  bytes 788809254 (788.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5317479  bytes 841098225 (841.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5317479  bytes 841098225 (841.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2997188  bytes 694642530 (694.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4031360  bytes 788829389 (788.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5317614  bytes 841118054 (841.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5317614  bytes 841118054 (841.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2997249  bytes 694656444 (694.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4031443  bytes 788844231 (788.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5317739  bytes 841135935 (841.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5317739  bytes 841135935 (841.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2997305  bytes 694669810 (694.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4031523  bytes 788858747 (788.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5317854  bytes 841153269 (841.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5317854  bytes 841153269 (841.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2997368  bytes 694684387 (694.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4031613  bytes 788874056 (788.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5317987  bytes 841172925 (841.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5317987  bytes 841172925 (841.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2997442  bytes 694701917 (694.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4031714  bytes 788892841 (788.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5318112  bytes 841190897 (841.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5318112  bytes 841190897 (841.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2997528  bytes 694720888 (694.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4031826  bytes 788912723 (788.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5318247  bytes 841210726 (841.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5318247  bytes 841210726 (841.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2997583  bytes 694734166 (694.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4031905  bytes 788927149 (788.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5318360  bytes 841227944 (841.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5318360  bytes 841227944 (841.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2997632  bytes 694747144 (694.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4031979  bytes 788941221 (788.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5318483  bytes 841245696 (841.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5318483  bytes 841245696 (841.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2997709  bytes 694762778 (694.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4032074  bytes 788956883 (788.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5318612  bytes 841265174 (841.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5318612  bytes 841265174 (841.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2997783  bytes 694780474 (694.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4032175  bytes 788975670 (788.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5318736  bytes 841283156 (841.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5318736  bytes 841283156 (841.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2997869  bytes 694799418 (694.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4032284  bytes 788995291 (788.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5318878  bytes 841303394 (841.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5318878  bytes 841303394 (841.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2997926  bytes 694812824 (694.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4032364  bytes 789009807 (789.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5318993  bytes 841320716 (841.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5318993  bytes 841320716 (841.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2997978  bytes 694826041 (694.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4032440  bytes 789024042 (789.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5319113  bytes 841338313 (841.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5319113  bytes 841338313 (841.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2998042  bytes 694840775 (694.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4032532  bytes 789039516 (789.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5319244  bytes 841357943 (841.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5319244  bytes 841357943 (841.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2998115  bytes 694858177 (694.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4032630  bytes 789058138 (789.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5319365  bytes 841375733 (841.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5319365  bytes 841375733 (841.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2998202  bytes 694877136 (694.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4032741  bytes 789077922 (789.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5319510  bytes 841396081 (841.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5319510  bytes 841396081 (841.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2998266  bytes 694890981 (694.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4032822  bytes 789092519 (789.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5319630  bytes 841413663 (841.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5319630  bytes 841413663 (841.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2998319  bytes 694904075 (694.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4032900  bytes 789106895 (789.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5319749  bytes 841431208 (841.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5319749  bytes 841431208 (841.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2998384  bytes 694918845 (694.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4032991  bytes 789122299 (789.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5319879  bytes 841450762 (841.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5319879  bytes 841450762 (841.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2998470  bytes 694939970 (694.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4033101  bytes 789142300 (789.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5320010  bytes 841469192 (841.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5320010  bytes 841469192 (841.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2998561  bytes 694959622 (694.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4033215  bytes 789162292 (789.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5320151  bytes 841489297 (841.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5320151  bytes 841489297 (841.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2998617  bytes 694972984 (694.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4033295  bytes 789176787 (789.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5320271  bytes 841506915 (841.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5320271  bytes 841506915 (841.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2998673  bytes 694986338 (694.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4033374  bytes 789191216 (789.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5320392  bytes 841524564 (841.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5320392  bytes 841524564 (841.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2998741  bytes 695001251 (695.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4033464  bytes 789206544 (789.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5320523  bytes 841544174 (841.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5320523  bytes 841544174 (841.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2998817  bytes 695018909 (695.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4033563  bytes 789225232 (789.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5320644  bytes 841561978 (841.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5320644  bytes 841561978 (841.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2998907  bytes 695038014 (695.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4033674  bytes 789245154 (789.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5320783  bytes 841581978 (841.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5320783  bytes 841581978 (841.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2998965  bytes 695051479 (695.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4033751  bytes 789259491 (789.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5320897  bytes 841599306 (841.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5320897  bytes 841599306 (841.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2999017  bytes 695064601 (695.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4033832  bytes 789274029 (789.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5321021  bytes 841617135 (841.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5321021  bytes 841617135 (841.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2999086  bytes 695079590 (695.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4033922  bytes 789289370 (789.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5321145  bytes 841636283 (841.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5321145  bytes 841636283 (841.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2999167  bytes 695097492 (695.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4034026  bytes 789308413 (789.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5321276  bytes 841654705 (841.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5321276  bytes 841654705 (841.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2999258  bytes 695116647 (695.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4034135  bytes 789328013 (789.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5321416  bytes 841674756 (841.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5321416  bytes 841674756 (841.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2999311  bytes 695129889 (695.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4034210  bytes 789342259 (789.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5321523  bytes 841691520 (841.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5321523  bytes 841691520 (841.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2999369  bytes 695143442 (695.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4034296  bytes 789357246 (789.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5321650  bytes 841709658 (841.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5321650  bytes 841709658 (841.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2999434  bytes 695158095 (695.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4034382  bytes 789372263 (789.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5321779  bytes 841729124 (841.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5321779  bytes 841729124 (841.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2999513  bytes 695175771 (695.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4034478  bytes 789390648 (789.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5321897  bytes 841746654 (841.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5321897  bytes 841746654 (841.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2999577  bytes 695190356 (695.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4034566  bytes 789406109 (789.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5322026  bytes 841765959 (841.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5322026  bytes 841765959 (841.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2999652  bytes 695207875 (695.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4034664  bytes 789424801 (789.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5322145  bytes 841783677 (841.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5322145  bytes 841783677 (841.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2999712  bytes 695221457 (695.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4034748  bytes 789439501 (789.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5322272  bytes 841801816 (841.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5322272  bytes 841801816 (841.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2999772  bytes 695235920 (695.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4034832  bytes 789454460 (789.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5322393  bytes 841820712 (841.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5322393  bytes 841820712 (841.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2999846  bytes 695253545 (695.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4034935  bytes 789473364 (789.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5322524  bytes 841839134 (841.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5322524  bytes 841839134 (841.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2999905  bytes 695267742 (695.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4035018  bytes 789488191 (789.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5322642  bytes 841857828 (841.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5322642  bytes 841857828 (841.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 2999983  bytes 695285427 (695.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4035125  bytes 789507615 (789.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5322773  bytes 841876218 (841.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5322773  bytes 841876218 (841.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3000043  bytes 695299012 (695.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4035205  bytes 789522102 (789.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5322894  bytes 841893973 (841.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5322894  bytes 841893973 (841.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3000108  bytes 695313637 (695.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4035290  bytes 789537077 (789.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5323020  bytes 841913225 (841.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5323020  bytes 841913225 (841.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3000165  bytes 695326986 (695.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4035366  bytes 789551300 (789.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5323132  bytes 841930383 (841.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5323132  bytes 841930383 (841.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3000246  bytes 695345591 (695.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4035478  bytes 789570980 (789.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5323264  bytes 841950081 (841.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5323264  bytes 841950081 (841.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3000327  bytes 695363419 (695.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4035581  bytes 789590147 (789.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5323389  bytes 841968114 (841.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5323389  bytes 841968114 (841.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3000390  bytes 695377268 (695.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4035662  bytes 789604816 (789.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5323506  bytes 841985576 (841.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5323506  bytes 841985576 (841.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3000455  bytes 695391986 (695.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4035753  bytes 789620252 (789.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5323639  bytes 842005230 (842.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5323639  bytes 842005230 (842.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3000533  bytes 695413446 (695.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4035854  bytes 789637430 (789.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5323764  bytes 842023260 (842.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5323764  bytes 842023260 (842.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3000615  bytes 695432029 (695.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4035963  bytes 789656845 (789.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5323893  bytes 842042756 (842.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5323893  bytes 842042756 (842.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3000695  bytes 695449819 (695.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4036064  bytes 789675753 (789.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5324026  bytes 842061204 (842.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5324026  bytes 842061204 (842.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3000752  bytes 695463328 (695.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4036142  bytes 789690203 (789.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5324141  bytes 842078538 (842.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5324141  bytes 842078538 (842.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3000817  bytes 695478034 (695.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4036235  bytes 789705794 (789.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5324278  bytes 842098483 (842.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5324278  bytes 842098483 (842.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3000872  bytes 695491399 (695.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4036315  bytes 789720328 (789.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5324389  bytes 842115635 (842.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5324389  bytes 842115635 (842.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3000949  bytes 695509812 (695.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4036422  bytes 789739638 (789.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5324521  bytes 842135263 (842.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5324521  bytes 842135263 (842.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3001030  bytes 695527744 (695.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4036527  bytes 789759017 (789.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5324652  bytes 842153631 (842.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5324652  bytes 842153631 (842.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3001099  bytes 695545240 (695.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4036615  bytes 789774712 (789.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5324770  bytes 842171283 (842.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5324770  bytes 842171283 (842.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3001161  bytes 695559746 (695.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4036701  bytes 789789798 (789.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5324908  bytes 842191316 (842.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5324908  bytes 842191316 (842.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3001215  bytes 695572976 (695.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4036779  bytes 789804134 (789.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5325022  bytes 842208562 (842.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5325022  bytes 842208562 (842.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3001305  bytes 695592144 (695.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4036890  bytes 789823835 (789.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5325157  bytes 842228408 (842.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5325157  bytes 842228408 (842.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3001389  bytes 695610208 (695.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4036991  bytes 789842774 (789.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5325288  bytes 842246777 (842.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5325288  bytes 842246777 (842.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3001443  bytes 695623458 (695.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4037069  bytes 789857130 (789.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5325400  bytes 842263919 (842.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5325400  bytes 842263919 (842.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3001513  bytes 695638555 (695.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4037167  bytes 789873087 (789.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5325541  bytes 842284050 (842.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5325541  bytes 842284050 (842.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3001577  bytes 695656020 (695.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4037254  bytes 789888757 (789.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5325652  bytes 842301210 (842.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5325652  bytes 842301210 (842.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3001660  bytes 695674695 (695.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4037362  bytes 789908155 (789.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5325789  bytes 842321098 (842.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5325789  bytes 842321098 (842.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3001749  bytes 695692965 (695.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4037465  bytes 789927268 (789.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5325921  bytes 842339519 (842.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5325921  bytes 842339519 (842.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3001804  bytes 695706318 (695.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4037538  bytes 789941349 (789.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5326030  bytes 842356505 (842.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5326030  bytes 842356505 (842.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3001871  bytes 695721172 (695.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4037633  bytes 789956997 (789.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5326167  bytes 842376428 (842.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5326167  bytes 842376428 (842.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3001925  bytes 695734473 (695.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4037711  bytes 789971340 (789.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5326284  bytes 842393892 (842.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5326284  bytes 842393892 (842.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3002007  bytes 695753343 (695.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4037821  bytes 789990865 (789.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5326419  bytes 842413676 (842.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5326419  bytes 842413676 (842.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3002091  bytes 695771660 (695.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4037925  bytes 790010021 (790.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5326547  bytes 842431735 (842.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5326547  bytes 842431735 (842.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3002154  bytes 695788825 (695.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4038008  bytes 790025419 (790.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5326658  bytes 842448931 (842.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5326658  bytes 842448931 (842.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3002219  bytes 695803505 (695.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4038102  bytes 790041027 (790.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5326807  bytes 842469736 (842.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5326807  bytes 842469736 (842.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3002276  bytes 695816843 (695.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4038180  bytes 790055451 (790.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5326916  bytes 842486722 (842.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5326916  bytes 842486722 (842.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3002362  bytes 695835832 (695.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4038287  bytes 790074861 (790.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5327047  bytes 842506206 (842.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5327047  bytes 842506206 (842.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3002423  bytes 695849505 (695.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4038371  bytes 790089852 (790.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5327166  bytes 842523775 (842.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5327166  bytes 842523775 (842.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3002492  bytes 695864909 (695.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4038454  bytes 790105791 (790.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5327255  bytes 842537341 (842.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5327255  bytes 842537341 (842.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3002562  bytes 695880016 (695.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4038548  bytes 790121438 (790.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5327394  bytes 842557424 (842.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5327394  bytes 842557424 (842.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3002624  bytes 695896954 (695.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4038638  bytes 790139612 (790.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5327519  bytes 842575348 (842.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5327519  bytes 842575348 (842.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3002708  bytes 695916361 (695.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4038747  bytes 790159035 (790.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5327650  bytes 842594924 (842.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5327650  bytes 842594924 (842.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3002764  bytes 695929759 (695.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4038826  bytes 790173528 (790.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5327765  bytes 842612246 (842.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5327765  bytes 842612246 (842.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3002838  bytes 695947193 (695.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4038923  bytes 790192188 (790.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5327890  bytes 842630279 (842.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5327890  bytes 842630279 (842.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3002909  bytes 695962290 (695.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4039015  bytes 790207584 (790.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5328025  bytes 842650059 (842.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5328025  bytes 842650059 (842.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3002965  bytes 695975932 (695.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4039094  bytes 790222041 (790.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5328151  bytes 842667968 (842.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5328151  bytes 842667968 (842.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3003026  bytes 695990360 (695.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4039183  bytes 790237311 (790.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5328278  bytes 842687244 (842.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5328278  bytes 842687244 (842.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3003098  bytes 696007723 (696.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4039284  bytes 790256077 (790.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5328398  bytes 842704980 (842.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5328398  bytes 842704980 (842.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3003189  bytes 696029745 (696.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4039399  bytes 790276623 (790.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5328535  bytes 842723743 (842.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5328535  bytes 842723743 (842.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3003255  bytes 696044481 (696.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4039488  bytes 790291905 (790.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5328661  bytes 842743041 (842.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5328661  bytes 842743041 (842.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3003311  bytes 696057786 (696.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4039567  bytes 790306422 (790.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5328785  bytes 842760916 (842.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5328785  bytes 842760916 (842.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3003374  bytes 696072251 (696.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4039654  bytes 790321501 (790.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5328902  bytes 842779558 (842.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5328902  bytes 842779558 (842.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3003449  bytes 696089980 (696.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4039758  bytes 790340539 (790.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5329031  bytes 842797876 (842.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5329031  bytes 842797876 (842.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3003532  bytes 696107864 (696.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4039861  bytes 790359546 (790.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5329156  bytes 842815857 (842.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5329156  bytes 842815857 (842.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3003602  bytes 696123125 (696.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4039950  bytes 790374826 (790.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5329279  bytes 842835011 (842.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5329279  bytes 842835011 (842.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3003670  bytes 696140721 (696.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4040044  bytes 790390909 (790.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5329411  bytes 842853397 (842.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5329411  bytes 842853397 (842.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3003732  bytes 696155130 (696.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4040130  bytes 790405946 (790.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5329531  bytes 842872195 (842.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5329531  bytes 842872195 (842.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3003805  bytes 696172382 (696.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4040227  bytes 790424357 (790.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5329661  bytes 842890443 (842.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5329661  bytes 842890443 (842.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3003894  bytes 696190708 (696.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4040332  bytes 790443662 (790.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5329794  bytes 842908915 (842.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5329794  bytes 842908915 (842.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3003966  bytes 696205865 (696.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4040424  bytes 790459171 (790.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5329920  bytes 842928225 (842.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5329920  bytes 842928225 (842.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3004025  bytes 696219327 (696.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4040506  bytes 790473783 (790.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5330045  bytes 842946140 (842.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5330045  bytes 842946140 (842.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3004091  bytes 696233991 (696.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4040594  bytes 790489143 (790.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5330174  bytes 842965468 (842.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5330174  bytes 842965468 (842.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3004164  bytes 696251430 (696.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4040696  bytes 790507975 (790.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5330300  bytes 842983544 (842.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5330300  bytes 842983544 (842.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3004258  bytes 696273652 (696.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4040812  bytes 790528711 (790.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5330441  bytes 843002539 (843.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5330441  bytes 843002539 (843.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3004327  bytes 696288498 (696.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4040898  bytes 790543689 (790.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5330573  bytes 843022103 (843.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5330573  bytes 843022103 (843.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3004386  bytes 696302008 (696.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4040980  bytes 790558373 (790.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5330702  bytes 843040250 (843.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5330702  bytes 843040250 (843.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3004453  bytes 696316780 (696.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4041069  bytes 790573707 (790.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5330827  bytes 843059378 (843.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5330827  bytes 843059378 (843.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3004529  bytes 696334477 (696.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4041171  bytes 790592601 (790.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5330954  bytes 843077568 (843.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5330954  bytes 843077568 (843.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3004614  bytes 696352541 (696.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4041273  bytes 790611710 (790.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5331086  bytes 843095964 (843.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5331086  bytes 843095964 (843.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3004679  bytes 696367319 (696.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4041355  bytes 790626520 (790.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5331213  bytes 843115138 (843.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5331213  bytes 843115138 (843.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3004750  bytes 696385039 (696.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4041452  bytes 790642853 (790.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5331352  bytes 843134018 (843.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5331352  bytes 843134018 (843.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
b'Error on request'
Token e243aac39fb012c084cfefeb2a6a3641 is maybe invalid 
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3004820  bytes 696399927 (696.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4041541  bytes 790658063 (790.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5331473  bytes 843152892 (843.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5331473  bytes 843152892 (843.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3004891  bytes 696417079 (696.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4041639  bytes 790676607 (790.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5331595  bytes 843170724 (843.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5331595  bytes 843170724 (843.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3004973  bytes 696434985 (696.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4041740  bytes 790695631 (790.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5331724  bytes 843188846 (843.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5331724  bytes 843188846 (843.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3005046  bytes 696450078 (696.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4041831  bytes 790711061 (790.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5331860  bytes 843208700 (843.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5331860  bytes 843208700 (843.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3005102  bytes 696463559 (696.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4041916  bytes 790725981 (790.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5331990  bytes 843227007 (843.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5331990  bytes 843227007 (843.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3005164  bytes 696477911 (696.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4041999  bytes 790740791 (790.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5332118  bytes 843246271 (843.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5332118  bytes 843246271 (843.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3005235  bytes 696495234 (696.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4042099  bytes 790759475 (790.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5332235  bytes 843263713 (843.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5332235  bytes 843263713 (843.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3005303  bytes 696513095 (696.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4042190  bytes 790775600 (790.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5332362  bytes 843281816 (843.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5332362  bytes 843281816 (843.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3005388  bytes 696531636 (696.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4042294  bytes 790794236 (790.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5332491  bytes 843300846 (843.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5332491  bytes 843300846 (843.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3005441  bytes 696544786 (696.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4042370  bytes 790808420 (790.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5332614  bytes 843318634 (843.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5332614  bytes 843318634 (843.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3005500  bytes 696559043 (696.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4042454  bytes 790823337 (790.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5332737  bytes 843337588 (843.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5332737  bytes 843337588 (843.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3005578  bytes 696576820 (696.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4042556  bytes 790842291 (790.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5332866  bytes 843355916 (843.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5332866  bytes 843355916 (843.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3005636  bytes 696590417 (696.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4042637  bytes 790856896 (790.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5332981  bytes 843373250 (843.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5332981  bytes 843373250 (843.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3005732  bytes 696610505 (696.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4042758  bytes 790877469 (790.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5333127  bytes 843393780 (843.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5333127  bytes 843393780 (843.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3005799  bytes 696627750 (696.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4042846  bytes 790893189 (790.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5333247  bytes 843411480 (843.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5333247  bytes 843411480 (843.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3005863  bytes 696642760 (696.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4042934  bytes 790908361 (790.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5333377  bytes 843430837 (843.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5333377  bytes 843430837 (843.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3005922  bytes 696656186 (696.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4043013  bytes 790922807 (790.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5333488  bytes 843447967 (843.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5333488  bytes 843447967 (843.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3005996  bytes 696673514 (696.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4043114  bytes 790941526 (790.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5333614  bytes 843466027 (843.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5333614  bytes 843466027 (843.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3006084  bytes 696692665 (696.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4043225  bytes 790961232 (790.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5333760  bytes 843486558 (843.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5333760  bytes 843486558 (843.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3006139  bytes 696706014 (696.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4043300  bytes 790975369 (790.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5333867  bytes 843503440 (843.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5333867  bytes 843503440 (843.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3006201  bytes 696720371 (696.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4043387  bytes 790990404 (790.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5334001  bytes 843523041 (843.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5334001  bytes 843523041 (843.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3006264  bytes 696734136 (696.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4043470  bytes 791005161 (791.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5334111  bytes 843540165 (843.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5334111  bytes 843540165 (843.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3006347  bytes 696755776 (696.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4043580  bytes 791025213 (791.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5334241  bytes 843558555 (843.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5334241  bytes 843558555 (843.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3006437  bytes 696775199 (696.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4043696  bytes 791045351 (791.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5334391  bytes 843579352 (843.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5334391  bytes 843579352 (843.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3006494  bytes 696788641 (696.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4043772  bytes 791059563 (791.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5334505  bytes 843596598 (843.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5334505  bytes 843596598 (843.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3006557  bytes 696803328 (696.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4043863  bytes 791075029 (791.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5334639  bytes 843616198 (843.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5334639  bytes 843616198 (843.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3006618  bytes 696816917 (696.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4043942  bytes 791089462 (791.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5334758  bytes 843633774 (843.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5334758  bytes 843633774 (843.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3006697  bytes 696834721 (696.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4044047  bytes 791108525 (791.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5334883  bytes 843651870 (843.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5334883  bytes 843651870 (843.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3006788  bytes 696854086 (696.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4044162  bytes 791128667 (791.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5335034  bytes 843672754 (843.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5335034  bytes 843672754 (843.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3006853  bytes 696871263 (696.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4044247  bytes 791144201 (791.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5335154  bytes 843690418 (843.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5335154  bytes 843690418 (843.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3006915  bytes 696885990 (696.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4044335  bytes 791159242 (791.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5335286  bytes 843709914 (843.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5335286  bytes 843709914 (843.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3006970  bytes 696899411 (696.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4044415  bytes 791173817 (791.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5335403  bytes 843727340 (843.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5335403  bytes 843727340 (843.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3007046  bytes 696917113 (696.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4044515  bytes 791192526 (791.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5335530  bytes 843745432 (843.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5335530  bytes 843745432 (843.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3007139  bytes 696936612 (696.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4044629  bytes 791212478 (791.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5335682  bytes 843766310 (843.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5335682  bytes 843766310 (843.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3007197  bytes 696950465 (696.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4044709  bytes 791227005 (791.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5335795  bytes 843783504 (843.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5335795  bytes 843783504 (843.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3007265  bytes 696965198 (696.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4044797  bytes 791242243 (791.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5335927  bytes 843803001 (843.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5335927  bytes 843803001 (843.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3007326  bytes 696978895 (696.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4044875  bytes 791256643 (791.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5336040  bytes 843820281 (843.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5336040  bytes 843820281 (843.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3007412  bytes 697000718 (697.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4044987  bytes 791276808 (791.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5336176  bytes 843838947 (843.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5336176  bytes 843838947 (843.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3007502  bytes 697019978 (697.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4045100  bytes 791296742 (791.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5336325  bytes 843859646 (843.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5336325  bytes 843859646 (843.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3007558  bytes 697033529 (697.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4045174  bytes 791310858 (791.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5336431  bytes 843876310 (843.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5336431  bytes 843876310 (843.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3007626  bytes 697048518 (697.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4045268  bytes 791326700 (791.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5336570  bytes 843896288 (843.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5336570  bytes 843896288 (843.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3007686  bytes 697062384 (697.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4045345  bytes 791341027 (791.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5336687  bytes 843913750 (843.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5336687  bytes 843913750 (843.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3007761  bytes 697080004 (697.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4045447  bytes 791359893 (791.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5336815  bytes 843932002 (843.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5336815  bytes 843932002 (843.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3007853  bytes 697099439 (697.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4045563  bytes 791380072 (791.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5336960  bytes 843952441 (843.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5336960  bytes 843952441 (843.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3007914  bytes 697116435 (697.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4045651  bytes 791395889 (791.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5337080  bytes 843970129 (843.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5337080  bytes 843970129 (843.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3007974  bytes 697131118 (697.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4045741  bytes 791411211 (791.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5337215  bytes 843989899 (843.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5337215  bytes 843989899 (843.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3008030  bytes 697144623 (697.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4045817  bytes 791425451 (791.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5337325  bytes 844006843 (844.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5337325  bytes 844006843 (844.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3008108  bytes 697162251 (697.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4045918  bytes 791444251 (791.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5337451  bytes 844024883 (844.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5337451  bytes 844024883 (844.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3008175  bytes 697177149 (697.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4046009  bytes 791459844 (791.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5337591  bytes 844044996 (844.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5337591  bytes 844044996 (844.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3008233  bytes 697190357 (697.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4046090  bytes 791474058 (791.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5337674  bytes 844055104 (844.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5337674  bytes 844055104 (844.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3008298  bytes 697205199 (697.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4046175  bytes 791489077 (791.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5337796  bytes 844074044 (844.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5337796  bytes 844074044 (844.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3008354  bytes 697218541 (697.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4046252  bytes 791503913 (791.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5337911  bytes 844091378 (844.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5337911  bytes 844091378 (844.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3008446  bytes 697240949 (697.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4046370  bytes 791524573 (791.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5338047  bytes 844110130 (844.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5338047  bytes 844110130 (844.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3008514  bytes 697255839 (697.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4046458  bytes 791539780 (791.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5338176  bytes 844129574 (844.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5338176  bytes 844129574 (844.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3008593  bytes 697273698 (697.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4046561  bytes 791558891 (791.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5338312  bytes 844148202 (844.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5338312  bytes 844148202 (844.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3008663  bytes 697288491 (697.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4046645  bytes 791573809 (791.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5338431  bytes 844166948 (844.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5338431  bytes 844166948 (844.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3008718  bytes 697301849 (697.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4046722  bytes 791588084 (791.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5338560  bytes 844185049 (844.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5338560  bytes 844185049 (844.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3008779  bytes 697315507 (697.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4046802  bytes 791602565 (791.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5338676  bytes 844202439 (844.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5338676  bytes 844202439 (844.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3008869  bytes 697334919 (697.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4046917  bytes 791622435 (791.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5338818  bytes 844222821 (844.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5338818  bytes 844222821 (844.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3008965  bytes 697357032 (697.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4047028  bytes 791642802 (791.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5338962  bytes 844242017 (844.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5338962  bytes 844242017 (844.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3009029  bytes 697372139 (697.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4047117  bytes 791658180 (791.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5339080  bytes 844260711 (844.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5339080  bytes 844260711 (844.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3009090  bytes 697385777 (697.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4047198  bytes 791672790 (791.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5339207  bytes 844278707 (844.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5339207  bytes 844278707 (844.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3009146  bytes 697399202 (697.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4047279  bytes 791687339 (791.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5339324  bytes 844296133 (844.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5339324  bytes 844296133 (844.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3009235  bytes 697418221 (697.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4047389  bytes 791706765 (791.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5339473  bytes 844316845 (844.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5339473  bytes 844316845 (844.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3009318  bytes 697436143 (697.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4047490  bytes 791725706 (791.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5339603  bytes 844335137 (844.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5339603  bytes 844335137 (844.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3009380  bytes 697450627 (697.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4047574  bytes 791740651 (791.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5339721  bytes 844353855 (844.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5339721  bytes 844353855 (844.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3009432  bytes 697463805 (697.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4047651  bytes 791754978 (791.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5339842  bytes 844371540 (844.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5339842  bytes 844371540 (844.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3009499  bytes 697481708 (697.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4047740  bytes 791770768 (791.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5339962  bytes 844389290 (844.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5339962  bytes 844389290 (844.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3009587  bytes 697500998 (697.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4047854  bytes 791790576 (791.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5340099  bytes 844409342 (844.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5340099  bytes 844409342 (844.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3009668  bytes 697518893 (697.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4047962  bytes 791810021 (791.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5340231  bytes 844427775 (844.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5340231  bytes 844427775 (844.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3009730  bytes 697533266 (697.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4048045  bytes 791824845 (791.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5340347  bytes 844446389 (844.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5340347  bytes 844446389 (844.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3009784  bytes 697546548 (697.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4048125  bytes 791839346 (791.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5340470  bytes 844464177 (844.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5340470  bytes 844464177 (844.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3009839  bytes 697559806 (697.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4048204  bytes 791853725 (791.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5340587  bytes 844481579 (844.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5340587  bytes 844481579 (844.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3009923  bytes 697578779 (697.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4048315  bytes 791873404 (791.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5340726  bytes 844501763 (844.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5340726  bytes 844501763 (844.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3010019  bytes 697601040 (697.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4048432  bytes 791894162 (791.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5340867  bytes 844520862 (844.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5340867  bytes 844520862 (844.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3010085  bytes 697615769 (697.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4048518  bytes 791909128 (791.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5340991  bytes 844539892 (844.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5340991  bytes 844539892 (844.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3010139  bytes 697629165 (697.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4048600  bytes 791923777 (791.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5341117  bytes 844557801 (844.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5341117  bytes 844557801 (844.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3010197  bytes 697642718 (697.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4048679  bytes 791938501 (791.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5341229  bytes 844574943 (844.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5341229  bytes 844574943 (844.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3010277  bytes 697661402 (697.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4048790  bytes 791958078 (791.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5341367  bytes 844595013 (844.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5341367  bytes 844595013 (844.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3010361  bytes 697679368 (697.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4048893  bytes 791977168 (791.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5341500  bytes 844613497 (844.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5341500  bytes 844613497 (844.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3010428  bytes 697694253 (697.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4048977  bytes 791992170 (791.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5341624  bytes 844632373 (844.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5341624  bytes 844632373 (844.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3010488  bytes 697707854 (697.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4049063  bytes 792007070 (792.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5341759  bytes 844650851 (844.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5341759  bytes 844650851 (844.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3010556  bytes 697725563 (697.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4049153  bytes 792022890 (792.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5341881  bytes 844668717 (844.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5341881  bytes 844668717 (844.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3010640  bytes 697744426 (697.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4049259  bytes 792042125 (792.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5342014  bytes 844688431 (844.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5342014  bytes 844688431 (844.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3010722  bytes 697762434 (697.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4049361  bytes 792061163 (792.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5342142  bytes 844706656 (844.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5342142  bytes 844706656 (844.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3010784  bytes 697777034 (697.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4049449  bytes 792076376 (792.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5342268  bytes 844725790 (844.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5342268  bytes 844725790 (844.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3010839  bytes 697790572 (697.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4049531  bytes 792091101 (792.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5342398  bytes 844744060 (844.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5342398  bytes 844744060 (844.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3010904  bytes 697804980 (697.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4049613  bytes 792106288 (792.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5342513  bytes 844761240 (844.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5342513  bytes 844761240 (844.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3010998  bytes 697824534 (697.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4049726  bytes 792126104 (792.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5342654  bytes 844781534 (844.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5342654  bytes 844781534 (844.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3011063  bytes 697838894 (697.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4049813  bytes 792141724 (792.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5342787  bytes 844799959 (844.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5342787  bytes 844799959 (844.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3011157  bytes 697861905 (697.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4049934  bytes 792162403 (792.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5342919  bytes 844819593 (844.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5342919  bytes 844819593 (844.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3011215  bytes 697875683 (697.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4050018  bytes 792177227 (792.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5343052  bytes 844837890 (844.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5343052  bytes 844837890 (844.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3011268  bytes 697888893 (697.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4050097  bytes 792191721 (792.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5343169  bytes 844855328 (844.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5343169  bytes 844855328 (844.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3011360  bytes 697908436 (697.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4050212  bytes 792212977 (792.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5343308  bytes 844875450 (844.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5343308  bytes 844875450 (844.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3011416  bytes 697921930 (697.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4050287  bytes 792227059 (792.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5343428  bytes 844893008 (844.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5343428  bytes 844893008 (844.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3011503  bytes 697940871 (697.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4050397  bytes 792246724 (792.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5343570  bytes 844913201 (844.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5343570  bytes 844913201 (844.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3011563  bytes 697954524 (697.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4050474  bytes 792261102 (792.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5343689  bytes 844930731 (844.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5343689  bytes 844930731 (844.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3011629  bytes 697972575 (697.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4050566  bytes 792277071 (792.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5343821  bytes 844949042 (844.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5343821  bytes 844949042 (844.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3011699  bytes 697987706 (697.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4050657  bytes 792293591 (792.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5343949  bytes 844968464 (844.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5343949  bytes 844968464 (844.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3011773  bytes 698005109 (698.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4050759  bytes 792312464 (792.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5344070  bytes 844986228 (844.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5344070  bytes 844986228 (844.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3011869  bytes 698024873 (698.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4050871  bytes 792332578 (792.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5344211  bytes 845006333 (845.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5344211  bytes 845006333 (845.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3011935  bytes 698038815 (698.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4050955  bytes 792348419 (792.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5344330  bytes 845023863 (845.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5344330  bytes 845023863 (845.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3011994  bytes 698052313 (698.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4051037  bytes 792363136 (792.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5344457  bytes 845041824 (845.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5344457  bytes 845041824 (845.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3012057  bytes 698066834 (698.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4051125  bytes 792378298 (792.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5344580  bytes 845061014 (845.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5344580  bytes 845061014 (845.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3012143  bytes 698088199 (698.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4051239  bytes 792398684 (792.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5344720  bytes 845080020 (845.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5344720  bytes 845080020 (845.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3012235  bytes 698107871 (698.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4051354  bytes 792418680 (792.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5344871  bytes 845100726 (845.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5344871  bytes 845100726 (845.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3012290  bytes 698121217 (698.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4051431  bytes 792432953 (792.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5344996  bytes 845118568 (845.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5344996  bytes 845118568 (845.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3012344  bytes 698134363 (698.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4051506  bytes 792447006 (792.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5345120  bytes 845136372 (845.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5345120  bytes 845136372 (845.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3012414  bytes 698149417 (698.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4051599  bytes 792462589 (792.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5345253  bytes 845156046 (845.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5345253  bytes 845156046 (845.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3012487  bytes 698166693 (698.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4051696  bytes 792481023 (792.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5345385  bytes 845174422 (845.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5345385  bytes 845174422 (845.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3012577  bytes 698185714 (698.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4051804  bytes 792500687 (792.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5345525  bytes 845194511 (845.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5345525  bytes 845194511 (845.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3012638  bytes 698199355 (698.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4051884  bytes 792515202 (792.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5345646  bytes 845212109 (845.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5345646  bytes 845212109 (845.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3012703  bytes 698216600 (698.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4051973  bytes 792530932 (792.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5345775  bytes 845230279 (845.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5345775  bytes 845230279 (845.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3012792  bytes 698233686 (698.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4052074  bytes 792547971 (792.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5345912  bytes 845250165 (845.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5345912  bytes 845250165 (845.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3012873  bytes 698251681 (698.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4052177  bytes 792566933 (792.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5346044  bytes 845268505 (845.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5346044  bytes 845268505 (845.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3012962  bytes 698270880 (698.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4052289  bytes 792587851 (792.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5346194  bytes 845289113 (845.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5346194  bytes 845289113 (845.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3013018  bytes 698284309 (698.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4052367  bytes 792602242 (792.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5346313  bytes 845306643 (845.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5346313  bytes 845306643 (845.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3013080  bytes 698298551 (698.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4052453  bytes 792618033 (792.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5346439  bytes 845324552 (845.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5346439  bytes 845324552 (845.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3013151  bytes 698313528 (698.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4052542  bytes 792633268 (792.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5346575  bytes 845344360 (845.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5346575  bytes 845344360 (845.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3013243  bytes 698335467 (698.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4052658  bytes 792654434 (792.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5346715  bytes 845363320 (845.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5346715  bytes 845363320 (845.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3013335  bytes 698355249 (698.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4052772  bytes 792674399 (792.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5346860  bytes 845383669 (845.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5346860  bytes 845383669 (845.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3013393  bytes 698368746 (698.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4052849  bytes 792688767 (792.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5346975  bytes 845400883 (845.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5346975  bytes 845400883 (845.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3013445  bytes 698381844 (698.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4052926  bytes 792703076 (792.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5347103  bytes 845419049 (845.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5347103  bytes 845419049 (845.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3013516  bytes 698396886 (698.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4053015  bytes 792718374 (792.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5347241  bytes 845438983 (845.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5347241  bytes 845438983 (845.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3013587  bytes 698414165 (698.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4053110  bytes 792736711 (792.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5347363  bytes 845456685 (845.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5347363  bytes 845456685 (845.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3013681  bytes 698433426 (698.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4053220  bytes 792756323 (792.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5347513  bytes 845477293 (845.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5347513  bytes 845477293 (845.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3013734  bytes 698446612 (698.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4053295  bytes 792770533 (792.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5347634  bytes 845494927 (845.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5347634  bytes 845494927 (845.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3013805  bytes 698466012 (698.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4053388  bytes 792786662 (792.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5347774  bytes 845513823 (845.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5347774  bytes 845513823 (845.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3013871  bytes 698481219 (698.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4053475  bytes 792801847 (792.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5347901  bytes 845533067 (845.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5347901  bytes 845533067 (845.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3013956  bytes 698499381 (698.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4053585  bytes 792821422 (792.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5348039  bytes 845551817 (845.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5348039  bytes 845551817 (845.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3014021  bytes 698514336 (698.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4053674  bytes 792836841 (792.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5348174  bytes 845571434 (845.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5348174  bytes 845571434 (845.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3014101  bytes 698532359 (698.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4053777  bytes 792855779 (792.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5348307  bytes 845589880 (845.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5348307  bytes 845589880 (845.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3014165  bytes 698546205 (698.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4053861  bytes 792870539 (792.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5348436  bytes 845607968 (845.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5348436  bytes 845607968 (845.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3014230  bytes 698561106 (698.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4053954  bytes 792886050 (792.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5348573  bytes 845627792 (845.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5348573  bytes 845627792 (845.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3014329  bytes 698583495 (698.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4054070  bytes 792906601 (792.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5348711  bytes 845646648 (845.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5348711  bytes 845646648 (845.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3014394  bytes 698598224 (698.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4054158  bytes 792921713 (792.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5348834  bytes 845665566 (845.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5348834  bytes 845665566 (845.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3014479  bytes 698616561 (698.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4054260  bytes 792940825 (792.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5348971  bytes 845684305 (845.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5348971  bytes 845684305 (845.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3014536  bytes 698629991 (698.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4054337  bytes 792955043 (792.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5349086  bytes 845701627 (845.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5349086  bytes 845701627 (845.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3014607  bytes 698645077 (698.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4054429  bytes 792970429 (792.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5349234  bytes 845722098 (845.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5349234  bytes 845722098 (845.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3014662  bytes 698658418 (698.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4054505  bytes 792984668 (792.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5349352  bytes 845739568 (845.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5349352  bytes 845739568 (845.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3014740  bytes 698676825 (698.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4054613  bytes 793003982 (793.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5349484  bytes 845759168 (845.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5349484  bytes 845759168 (845.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3014842  bytes 698696623 (698.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4054732  bytes 793024976 (793.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5349631  bytes 845778445 (845.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5349631  bytes 845778445 (845.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3014920  bytes 698715116 (698.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4054829  bytes 793041469 (793.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5349752  bytes 845796185 (845.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5349752  bytes 845796185 (845.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3014984  bytes 698729746 (698.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4054915  bytes 793056431 (793.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5349890  bytes 845816194 (845.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5349890  bytes 845816194 (845.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3015044  bytes 698743855 (698.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4054993  bytes 793070970 (793.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5350007  bytes 845833658 (845.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5350007  bytes 845833658 (845.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3015128  bytes 698762533 (698.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4055098  bytes 793090073 (793.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5350142  bytes 845853430 (845.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5350142  bytes 845853430 (845.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3015213  bytes 698780763 (698.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4055203  bytes 793109368 (793.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5350278  bytes 845872034 (845.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5350278  bytes 845872034 (845.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3015271  bytes 698794480 (698.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4055282  bytes 793123805 (793.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5350401  bytes 845889772 (845.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5350401  bytes 845889772 (845.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3015335  bytes 698809086 (698.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4055367  bytes 793138737 (793.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5350545  bytes 845910056 (845.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5350545  bytes 845910056 (845.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3015405  bytes 698826875 (698.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4055458  bytes 793154623 (793.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5350670  bytes 845928016 (845.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5350670  bytes 845928016 (845.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3015490  bytes 698845731 (698.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4055569  bytes 793174167 (793.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5350811  bytes 845948126 (845.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5350811  bytes 845948126 (845.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3015578  bytes 698863979 (698.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4055674  bytes 793193293 (793.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5350955  bytes 845967182 (845.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5350955  bytes 845967182 (845.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3015638  bytes 698878060 (698.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4055755  bytes 793208177 (793.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5351073  bytes 845984706 (845.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5351073  bytes 845984706 (845.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3015707  bytes 698893194 (698.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4055844  bytes 793223997 (793.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5351213  bytes 846004689 (846.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5351213  bytes 846004689 (846.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3015763  bytes 698906572 (698.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4055922  bytes 793238380 (793.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5351336  bytes 846022439 (846.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5351336  bytes 846022439 (846.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3015847  bytes 698925286 (698.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4056029  bytes 793257643 (793.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5351469  bytes 846042107 (846.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5351469  bytes 846042107 (846.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3015928  bytes 698943232 (698.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4056132  bytes 793276660 (793.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5351603  bytes 846060644 (846.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5351603  bytes 846060644 (846.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3015997  bytes 698961129 (698.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4056219  bytes 793292592 (793.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5351726  bytes 846078488 (846.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5351726  bytes 846078488 (846.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3016060  bytes 698975783 (698.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4056309  bytes 793307930 (793.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5351871  bytes 846098766 (846.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5351871  bytes 846098766 (846.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3016118  bytes 698989288 (698.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4056384  bytes 793322127 (793.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5351989  bytes 846116318 (846.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5351989  bytes 846116318 (846.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3016195  bytes 699007630 (699.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4056491  bytes 793341398 (793.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5352123  bytes 846136038 (846.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5352123  bytes 846136038 (846.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3016278  bytes 699025678 (699.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4056592  bytes 793360373 (793.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5352259  bytes 846154524 (846.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5352259  bytes 846154524 (846.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3016333  bytes 699038988 (699.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4056668  bytes 793374625 (793.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5352379  bytes 846172106 (846.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5352379  bytes 846172106 (846.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3016399  bytes 699053732 (699.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4056762  bytes 793390193 (793.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5352529  bytes 846192856 (846.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5352529  bytes 846192856 (846.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3016464  bytes 699071081 (699.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4056851  bytes 793406003 (793.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5352659  bytes 846211076 (846.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5352659  bytes 846211076 (846.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3016547  bytes 699089790 (699.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4056953  bytes 793424999 (793.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5352788  bytes 846230444 (846.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5352788  bytes 846230444 (846.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3016634  bytes 699108053 (699.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4057057  bytes 793444155 (793.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5352922  bytes 846248943 (846.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5352922  bytes 846248943 (846.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3016685  bytes 699121227 (699.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4057134  bytes 793458497 (793.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5353044  bytes 846266641 (846.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5353044  bytes 846266641 (846.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3016752  bytes 699136163 (699.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4057223  bytes 793473689 (793.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5353192  bytes 846287168 (846.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5353192  bytes 846287168 (846.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
b'Error on request'
Token e243aac39fb012c084cfefeb2a6a3641 is maybe invalid 
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3016815  bytes 699150024 (699.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4057305  bytes 793488893 (793.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5353316  bytes 846304970 (846.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5353316  bytes 846304970 (846.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3016899  bytes 699169190 (699.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4057412  bytes 793508164 (793.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5353448  bytes 846324586 (846.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5353448  bytes 846324586 (846.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3016966  bytes 699183512 (699.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4057495  bytes 793523154 (793.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5353579  bytes 846342754 (846.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5353579  bytes 846342754 (846.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3017061  bytes 699205861 (699.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4057611  bytes 793544685 (793.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5353716  bytes 846361514 (846.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5353716  bytes 846361514 (846.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3017130  bytes 699220954 (699.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4057702  bytes 793560068 (793.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5353849  bytes 846381154 (846.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5353849  bytes 846381154 (846.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3017187  bytes 699234586 (699.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4057782  bytes 793574663 (793.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5353979  bytes 846399307 (846.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5353979  bytes 846399307 (846.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3017278  bytes 699253731 (699.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4057896  bytes 793594979 (793.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5354121  bytes 846419505 (846.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5354121  bytes 846419505 (846.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3017340  bytes 699267365 (699.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4057975  bytes 793609485 (793.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5354240  bytes 846437011 (846.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5354240  bytes 846437011 (846.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3017430  bytes 699286201 (699.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4058084  bytes 793629112 (793.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5354378  bytes 846455756 (846.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5354378  bytes 846455756 (846.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3017498  bytes 699301185 (699.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4058171  bytes 793644150 (793.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5354516  bytes 846475656 (846.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5354516  bytes 846475656 (846.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3017562  bytes 699318020 (699.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4058253  bytes 793659406 (793.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5354652  bytes 846494191 (846.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5354652  bytes 846494191 (846.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3017626  bytes 699332867 (699.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4058340  bytes 793674388 (793.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5354784  bytes 846513617 (846.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5354784  bytes 846513617 (846.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3017701  bytes 699350424 (699.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4058438  bytes 793692965 (793.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5354908  bytes 846531547 (846.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5354908  bytes 846531547 (846.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3017792  bytes 699368936 (699.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4058540  bytes 793712025 (793.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5355048  bytes 846550394 (846.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5355048  bytes 846550394 (846.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3017860  bytes 699384075 (699.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4058630  bytes 793727337 (793.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5355185  bytes 846570346 (846.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5355185  bytes 846570346 (846.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3017915  bytes 699397349 (699.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4058709  bytes 793741746 (793.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5355312  bytes 846588342 (846.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5355312  bytes 846588342 (846.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3017976  bytes 699411682 (699.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4058795  bytes 793756699 (793.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5355444  bytes 846607788 (846.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5355444  bytes 846607788 (846.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3018050  bytes 699429153 (699.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4058896  bytes 793775453 (793.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5355573  bytes 846625984 (846.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5355573  bytes 846625984 (846.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3018147  bytes 699453063 (699.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4059015  bytes 793797089 (793.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5355719  bytes 846645250 (846.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5355719  bytes 846645250 (846.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3018215  bytes 699467952 (699.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4059102  bytes 793812132 (793.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5355854  bytes 846665052 (846.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5355854  bytes 846665052 (846.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3018266  bytes 699481046 (699.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4059178  bytes 793826416 (793.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5355977  bytes 846682839 (846.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5355977  bytes 846682839 (846.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3018327  bytes 699495418 (699.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4059262  bytes 793841292 (793.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5356109  bytes 846702347 (846.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5356109  bytes 846702347 (846.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3018413  bytes 699514077 (699.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4059370  bytes 793860787 (793.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5356242  bytes 846720751 (846.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5356242  bytes 846720751 (846.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3018497  bytes 699532121 (699.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4059477  bytes 793881206 (793.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5356382  bytes 846739598 (846.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5356382  bytes 846739598 (846.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3018566  bytes 699547247 (699.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4059569  bytes 793896711 (793.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5356519  bytes 846759446 (846.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5356519  bytes 846759446 (846.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3018629  bytes 699564323 (699.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4059658  bytes 793912701 (793.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5356651  bytes 846777773 (846.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5356651  bytes 846777773 (846.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3018698  bytes 699579682 (699.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4059748  bytes 793928253 (793.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5356771  bytes 846796571 (846.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5356771  bytes 846796571 (846.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3018778  bytes 699597503 (699.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4059851  bytes 793947709 (793.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5356902  bytes 846814957 (846.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5356902  bytes 846814957 (846.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3018860  bytes 699615491 (699.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4059956  bytes 793967056 (793.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5357038  bytes 846833598 (846.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5357038  bytes 846833598 (846.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3018927  bytes 699630349 (699.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4060037  bytes 793981792 (793.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5357165  bytes 846852772 (846.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5357165  bytes 846852772 (846.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3018981  bytes 699643586 (699.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4060121  bytes 793996599 (793.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5357302  bytes 846871453 (846.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5357302  bytes 846871453 (846.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3019043  bytes 699658023 (699.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4060208  bytes 794011654 (794.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5357432  bytes 846890807 (846.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5357432  bytes 846890807 (846.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3019118  bytes 699675578 (699.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4060308  bytes 794030398 (794.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5357563  bytes 846909131 (846.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5357563  bytes 846909131 (846.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3019211  bytes 699697515 (699.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4060417  bytes 794050511 (794.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5357701  bytes 846927827 (846.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5357701  bytes 846927827 (846.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3019274  bytes 699712088 (699.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4060503  bytes 794065544 (794.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5357835  bytes 846947577 (846.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5357835  bytes 846947577 (846.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3019330  bytes 699725489 (699.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4060584  bytes 794080153 (794.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5357971  bytes 846966159 (846.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5357971  bytes 846966159 (846.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3019398  bytes 699740266 (699.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4060665  bytes 794094832 (794.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5358086  bytes 846984543 (846.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5358086  bytes 846984543 (846.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3019474  bytes 699757832 (699.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4060767  bytes 794113687 (794.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5358213  bytes 847002721 (847.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5358213  bytes 847002721 (847.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3019560  bytes 699776284 (699.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4060871  bytes 794132924 (794.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5358340  bytes 847020858 (847.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5358340  bytes 847020858 (847.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3019631  bytes 699791283 (699.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4060962  bytes 794148285 (794.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5358478  bytes 847040828 (847.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5358478  bytes 847040828 (847.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3019701  bytes 699808982 (699.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4061056  bytes 794165400 (794.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5358610  bytes 847059178 (847.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5358610  bytes 847059178 (847.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3019765  bytes 699824137 (699.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4061150  bytes 794180932 (794.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5358741  bytes 847078532 (847.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5358741  bytes 847078532 (847.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3019838  bytes 699841559 (699.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4061256  bytes 794200006 (794.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5358874  bytes 847097022 (847.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5358874  bytes 847097022 (847.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3019902  bytes 699855634 (699.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4061340  bytes 794215004 (794.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5359000  bytes 847114931 (847.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5359000  bytes 847114931 (847.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3019993  bytes 699874826 (699.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4061446  bytes 794234362 (794.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5359135  bytes 847134863 (847.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5359135  bytes 847134863 (847.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3020050  bytes 699888184 (699.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4061526  bytes 794248829 (794.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5359253  bytes 847152387 (847.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5359253  bytes 847152387 (847.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3020114  bytes 699902768 (699.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4061618  bytes 794264257 (794.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5359390  bytes 847172190 (847.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5359390  bytes 847172190 (847.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3020190  bytes 699920288 (699.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4061719  bytes 794283000 (794.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5359522  bytes 847190566 (847.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5359522  bytes 847190566 (847.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3020262  bytes 699938166 (699.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4061809  bytes 794298925 (794.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5359638  bytes 847207986 (847.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5359638  bytes 847207986 (847.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3020352  bytes 699957359 (699.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4061921  bytes 794318761 (794.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5359791  bytes 847228893 (847.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5359791  bytes 847228893 (847.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3020414  bytes 699971120 (699.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4062000  bytes 794334342 (794.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5359910  bytes 847246423 (847.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5359910  bytes 847246423 (847.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3020475  bytes 699985493 (699.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4062082  bytes 794349091 (794.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5360044  bytes 847265988 (847.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5360044  bytes 847265988 (847.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3020532  bytes 699998934 (699.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4062161  bytes 794363516 (794.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5360165  bytes 847283712 (847.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5360165  bytes 847283712 (847.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3020609  bytes 700016581 (700.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4062259  bytes 794382056 (794.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5360297  bytes 847302072 (847.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5360297  bytes 847302072 (847.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3020702  bytes 700036025 (700.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4062374  bytes 794402213 (794.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5360448  bytes 847322932 (847.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5360448  bytes 847322932 (847.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3020778  bytes 700053992 (700.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4062466  bytes 794418420 (794.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5360571  bytes 847340776 (847.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5360571  bytes 847340776 (847.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3020806  bytes 700060088 (700.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4062510  bytes 794423902 (794.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5360604  bytes 847344090 (847.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5360604  bytes 847344090 (847.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3020830  bytes 700065118 (700.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4062543  bytes 794428581 (794.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5360622  bytes 847345382 (847.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5360622  bytes 847345382 (847.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3020869  bytes 700074300 (700.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4062608  bytes 794438784 (794.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5360655  bytes 847347710 (847.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5360655  bytes 847347710 (847.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3020920  bytes 700084690 (700.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4062672  bytes 794448705 (794.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5360705  bytes 847352309 (847.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5360705  bytes 847352309 (847.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3020968  bytes 700095176 (700.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4062730  bytes 794459797 (794.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5360775  bytes 847362076 (847.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5360775  bytes 847362076 (847.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3021016  bytes 700105673 (700.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4062795  bytes 794470268 (794.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5360857  bytes 847373755 (847.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5360857  bytes 847373755 (847.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3021054  bytes 700115028 (700.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4062852  bytes 794479899 (794.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5360929  bytes 847383614 (847.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5360929  bytes 847383614 (847.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3021122  bytes 700132678 (700.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4062950  bytes 794496259 (794.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5361019  bytes 847394697 (847.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5361019  bytes 847394697 (847.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3021199  bytes 700148127 (700.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4063040  bytes 794511307 (794.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5361124  bytes 847407868 (847.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5361124  bytes 847407868 (847.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3021240  bytes 700157797 (700.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4063097  bytes 794521001 (794.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5361199  bytes 847417941 (847.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5361199  bytes 847417941 (847.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3021288  bytes 700168355 (700.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4063165  bytes 794531507 (794.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5361287  bytes 847429886 (847.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5361287  bytes 847429886 (847.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3021337  bytes 700178221 (700.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4063222  bytes 794541845 (794.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5361361  bytes 847439911 (847.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5361361  bytes 847439911 (847.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3021399  bytes 700191999 (700.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4063308  bytes 794556744 (794.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5361446  bytes 847450690 (847.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5361446  bytes 847450690 (847.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3021497  bytes 700212076 (700.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4063422  bytes 794576864 (794.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5361602  bytes 847471740 (847.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5361602  bytes 847471740 (847.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3021569  bytes 700229757 (700.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4063509  bytes 794592582 (794.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5361720  bytes 847489146 (847.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5361720  bytes 847489146 (847.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3021639  bytes 700245315 (700.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4063605  bytes 794609691 (794.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5361865  bytes 847509436 (847.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5361865  bytes 847509436 (847.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3021701  bytes 700259270 (700.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4063686  bytes 794625876 (794.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5361987  bytes 847527122 (847.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5361987  bytes 847527122 (847.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3021777  bytes 700276822 (700.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4063785  bytes 794644486 (794.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5362122  bytes 847545728 (847.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5362122  bytes 847545728 (847.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3021870  bytes 700296279 (700.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4063901  bytes 794664686 (794.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5362269  bytes 847566190 (847.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5362269  bytes 847566190 (847.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3021934  bytes 700310346 (700.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4063981  bytes 794679798 (794.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5362398  bytes 847584276 (847.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5362398  bytes 847584276 (847.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3021999  bytes 700324939 (700.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4064069  bytes 794695327 (794.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5362539  bytes 847604358 (847.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5362539  bytes 847604358 (847.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3022058  bytes 700338450 (700.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4064143  bytes 794709380 (794.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5362654  bytes 847621526 (847.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5362654  bytes 847621526 (847.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3022146  bytes 700360310 (700.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4064258  bytes 794729723 (794.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5362793  bytes 847640348 (847.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5362793  bytes 847640348 (847.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3022238  bytes 700379615 (700.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4064377  bytes 794750105 (794.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5362942  bytes 847660996 (847.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5362942  bytes 847660996 (847.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3022300  bytes 700393265 (700.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4064459  bytes 794764765 (794.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5363064  bytes 847678728 (847.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5363064  bytes 847678728 (847.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3022366  bytes 700407827 (700.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4064547  bytes 794779871 (794.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5363203  bytes 847698588 (847.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5363203  bytes 847698588 (847.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3022419  bytes 700421050 (700.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4064625  bytes 794794208 (794.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5363322  bytes 847716094 (847.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5363322  bytes 847716094 (847.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3022492  bytes 700438450 (700.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4064727  bytes 794813021 (794.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5363451  bytes 847734350 (847.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5363451  bytes 847734350 (847.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3022580  bytes 700457673 (700.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4064840  bytes 794832989 (794.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5363595  bytes 847754814 (847.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5363595  bytes 847754814 (847.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3022650  bytes 700474909 (700.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4064925  bytes 794848480 (794.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5363728  bytes 847773178 (847.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5363728  bytes 847773178 (847.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3022719  bytes 700490017 (700.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4065017  bytes 794863972 (794.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5363861  bytes 847792688 (847.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5363861  bytes 847792688 (847.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3022779  bytes 700503863 (700.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4065096  bytes 794878378 (794.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5363992  bytes 847810856 (847.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5363992  bytes 847810856 (847.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3022870  bytes 700522355 (700.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4065206  bytes 794898039 (794.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5364118  bytes 847829018 (847.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5364118  bytes 847829018 (847.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3022935  bytes 700537045 (700.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4065295  bytes 794913479 (794.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5364251  bytes 847848673 (847.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5364251  bytes 847848673 (847.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3023011  bytes 700554556 (700.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4065392  bytes 794932049 (794.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5364383  bytes 847867031 (847.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5364383  bytes 847867031 (847.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3023080  bytes 700569445 (700.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4065480  bytes 794947238 (794.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5364511  bytes 847886305 (847.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5364511  bytes 847886305 (847.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3023138  bytes 700582800 (700.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4065558  bytes 794961579 (794.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5364635  bytes 847904108 (847.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5364635  bytes 847904108 (847.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3023214  bytes 700600730 (700.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4065652  bytes 794978780 (794.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5364767  bytes 847922472 (847.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5364767  bytes 847922472 (847.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3023300  bytes 700619854 (700.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4065766  bytes 794998667 (794.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5364914  bytes 847943028 (847.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5364914  bytes 847943028 (847.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3023383  bytes 700637811 (700.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4065870  bytes 795017957 (795.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5365050  bytes 847961632 (847.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5365050  bytes 847961632 (847.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3023450  bytes 700652616 (700.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4065960  bytes 795033630 (795.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5365188  bytes 847981472 (847.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5365188  bytes 847981472 (847.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3023515  bytes 700666818 (700.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4066038  bytes 795049131 (795.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5365314  bytes 847999380 (847.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5365314  bytes 847999380 (847.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3023567  bytes 700679845 (700.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4066113  bytes 795063314 (795.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5365428  bytes 848016590 (848.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5365428  bytes 848016590 (848.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3023651  bytes 700698843 (700.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4066228  bytes 795083225 (795.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5365580  bytes 848037486 (848.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5365580  bytes 848037486 (848.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3023742  bytes 700720775 (700.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4066339  bytes 795103473 (795.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5365721  bytes 848056455 (848.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5365721  bytes 848056455 (848.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3023805  bytes 700735285 (700.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4066425  bytes 795118426 (795.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5365844  bytes 848075445 (848.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5365844  bytes 848075445 (848.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3023861  bytes 700748738 (700.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4066504  bytes 795132955 (795.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5365966  bytes 848093134 (848.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5365966  bytes 848093134 (848.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3023918  bytes 700761945 (700.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4066578  bytes 795147055 (795.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5366076  bytes 848110136 (848.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5366076  bytes 848110136 (848.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3024002  bytes 700780748 (700.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4066692  bytes 795166836 (795.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5366220  bytes 848130592 (848.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5366220  bytes 848130592 (848.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3024086  bytes 700798727 (700.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4066796  bytes 795186011 (795.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5366363  bytes 848149584 (848.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5366363  bytes 848149584 (848.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3024154  bytes 700813780 (700.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4066881  bytes 795201078 (795.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5366486  bytes 848168538 (848.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5366486  bytes 848168538 (848.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3024209  bytes 700827183 (700.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4066963  bytes 795215735 (795.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5366620  bytes 848186923 (848.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5366620  bytes 848186923 (848.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3024285  bytes 700845513 (700.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4067055  bytes 795231892 (795.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5366744  bytes 848204795 (848.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5366744  bytes 848204795 (848.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3024376  bytes 700864717 (700.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4067163  bytes 795251795 (795.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5366893  bytes 848225507 (848.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5366893  bytes 848225507 (848.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3024460  bytes 700883092 (700.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4067265  bytes 795271086 (795.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5367030  bytes 848244186 (848.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5367030  bytes 848244186 (848.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3024526  bytes 700897761 (700.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4067350  bytes 795286197 (795.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5367154  bytes 848263084 (848.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5367154  bytes 848263084 (848.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3024584  bytes 700911264 (700.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4067439  bytes 795301396 (795.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5367286  bytes 848281519 (848.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5367286  bytes 848281519 (848.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3024646  bytes 700924939 (700.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4067517  bytes 795315845 (795.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5367403  bytes 848298921 (848.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5367403  bytes 848298921 (848.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3024735  bytes 700944288 (700.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4067630  bytes 795335779 (795.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5367544  bytes 848319063 (848.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5367544  bytes 848319063 (848.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3024832  bytes 700966737 (700.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4067752  bytes 795357043 (795.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5367691  bytes 848338431 (848.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5367691  bytes 848338431 (848.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3024904  bytes 700982069 (700.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4067845  bytes 795374161 (795.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5367820  bytes 848357697 (848.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5367820  bytes 848357697 (848.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3024962  bytes 700995552 (700.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4067926  bytes 795388768 (795.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5367954  bytes 848376212 (848.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5367954  bytes 848376212 (848.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3025020  bytes 701009066 (701.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4068005  bytes 795403234 (795.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5368069  bytes 848393380 (848.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5368069  bytes 848393380 (848.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3025104  bytes 701027865 (701.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4068116  bytes 795422911 (795.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5368213  bytes 848413836 (848.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5368213  bytes 848413836 (848.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3025187  bytes 701045792 (701.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4068219  bytes 795442033 (795.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5368353  bytes 848432671 (848.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5368353  bytes 848432671 (848.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3025249  bytes 701060206 (701.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4068300  bytes 795456777 (795.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5368476  bytes 848451625 (848.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5368476  bytes 848451625 (848.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3025302  bytes 701073464 (701.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4068379  bytes 795471295 (795.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5368597  bytes 848469310 (848.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5368597  bytes 848469310 (848.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3025367  bytes 701090778 (701.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4068465  bytes 795486872 (795.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5368722  bytes 848487258 (848.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5368722  bytes 848487258 (848.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3025456  bytes 701109950 (701.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4068578  bytes 795506557 (795.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5368867  bytes 848507668 (848.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5368867  bytes 848507668 (848.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3025548  bytes 701128810 (701.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4068687  bytes 795526296 (795.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5369002  bytes 848526257 (848.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5369002  bytes 848526257 (848.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3025615  bytes 701143491 (701.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4068775  bytes 795541449 (795.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5369135  bytes 848545801 (848.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5369135  bytes 848545801 (848.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3025684  bytes 701157642 (701.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4068863  bytes 795558730 (795.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5369254  bytes 848563307 (848.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5369254  bytes 848563307 (848.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3025748  bytes 701171537 (701.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4068948  bytes 795573757 (795.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5369385  bytes 848581499 (848.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5369385  bytes 848581499 (848.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3025836  bytes 701191088 (701.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4069062  bytes 795593531 (795.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5369535  bytes 848602227 (848.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5369535  bytes 848602227 (848.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3025905  bytes 701208788 (701.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4069156  bytes 795609774 (795.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5369668  bytes 848620702 (848.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5369668  bytes 848620702 (848.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3025991  bytes 701227524 (701.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4069259  bytes 795628842 (795.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5369803  bytes 848640408 (848.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5369803  bytes 848640408 (848.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3026044  bytes 701240711 (701.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4069336  bytes 795643048 (795.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5369926  bytes 848658158 (848.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5369926  bytes 848658158 (848.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3026102  bytes 701254245 (701.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4069419  bytes 795657925 (795.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5370055  bytes 848676223 (848.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5370055  bytes 848676223 (848.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3026168  bytes 701269093 (701.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4069511  bytes 795673432 (795.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5370195  bytes 848696301 (848.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5370195  bytes 848696301 (848.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3026247  bytes 701286745 (701.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4069606  bytes 795691774 (795.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5370321  bytes 848714423 (848.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5370321  bytes 848714423 (848.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3026342  bytes 701306139 (701.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4069717  bytes 795712605 (795.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5370466  bytes 848734759 (848.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5370466  bytes 848734759 (848.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3026398  bytes 701319672 (701.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4069796  bytes 795727087 (795.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5370584  bytes 848752177 (848.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5370584  bytes 848752177 (848.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3026466  bytes 701337447 (701.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4069885  bytes 795742874 (795.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5370714  bytes 848770435 (848.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5370714  bytes 848770435 (848.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3026532  bytes 701352178 (701.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4069974  bytes 795758139 (795.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5370847  bytes 848790075 (848.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5370847  bytes 848790075 (848.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3026609  bytes 701369746 (701.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4070075  bytes 795776906 (795.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5370974  bytes 848808203 (848.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5370974  bytes 848808203 (848.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3026702  bytes 701389220 (701.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4070194  bytes 795798381 (795.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5371124  bytes 848828846 (848.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5371124  bytes 848828846 (848.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3026767  bytes 701403214 (701.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4070278  bytes 795813854 (795.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5371244  bytes 848846404 (848.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5371244  bytes 848846404 (848.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3026823  bytes 701416509 (701.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4070355  bytes 795828077 (795.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5371362  bytes 848863933 (848.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5371362  bytes 848863933 (848.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3026895  bytes 701431859 (701.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4070446  bytes 795843589 (795.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5371495  bytes 848883573 (848.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5371495  bytes 848883573 (848.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3026985  bytes 701453607 (701.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4070560  bytes 795863984 (795.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5371631  bytes 848902301 (848.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5371631  bytes 848902301 (848.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3027078  bytes 701473297 (701.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4070673  bytes 795883957 (795.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5371779  bytes 848922806 (848.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5371779  bytes 848922806 (848.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3027132  bytes 701486556 (701.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4070748  bytes 795898136 (795.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5371891  bytes 848939972 (848.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5371891  bytes 848939972 (848.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3027184  bytes 701499647 (701.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4070828  bytes 795912601 (795.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5372020  bytes 848958073 (848.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5372020  bytes 848958073 (848.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3027250  bytes 701514562 (701.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4070919  bytes 795928002 (795.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5372153  bytes 848977807 (848.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5372153  bytes 848977807 (848.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3027328  bytes 701532126 (701.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4071018  bytes 795946601 (795.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5372283  bytes 848996117 (848.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5372283  bytes 848996117 (848.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3027417  bytes 701551543 (701.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4071124  bytes 795966010 (795.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5372428  bytes 849016275 (849.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5372428  bytes 849016275 (849.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3027473  bytes 701564894 (701.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4071202  bytes 795980455 (795.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5372545  bytes 849033701 (849.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5372545  bytes 849033701 (849.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3027541  bytes 701582875 (701.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4071301  bytes 795996961 (795.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5372689  bytes 849052806 (849.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5372689  bytes 849052806 (849.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3027610  bytes 701597974 (701.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4071396  bytes 796012738 (796.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5372831  bytes 849072926 (849.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5372831  bytes 849072926 (849.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3027687  bytes 701615586 (701.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4071492  bytes 796031107 (796.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5372959  bytes 849090940 (849.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5372959  bytes 849090940 (849.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3027785  bytes 701635859 (701.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4071610  bytes 796051585 (796.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5373101  bytes 849111179 (849.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5373101  bytes 849111179 (849.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3027846  bytes 701649532 (701.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4071692  bytes 796066284 (796.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5373220  bytes 849128755 (849.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5373220  bytes 849128755 (849.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3027902  bytes 701663099 (701.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4071773  bytes 796080883 (796.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5373353  bytes 849147182 (849.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5373353  bytes 849147182 (849.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3027965  bytes 701677637 (701.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4071861  bytes 796096017 (796.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5373484  bytes 849166576 (849.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5373484  bytes 849166576 (849.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3028047  bytes 701699197 (701.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4071972  bytes 796117545 (796.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5373625  bytes 849185526 (849.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5373625  bytes 849185526 (849.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3028142  bytes 701718631 (701.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4072088  bytes 796137729 (796.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5373775  bytes 849206160 (849.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5373775  bytes 849206160 (849.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3028204  bytes 701732286 (701.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4072165  bytes 796152091 (796.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5373896  bytes 849223794 (849.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5373896  bytes 849223794 (849.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3028262  bytes 701745657 (701.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4072243  bytes 796166447 (796.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5374015  bytes 849241300 (849.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5374015  bytes 849241300 (849.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3028336  bytes 701761487 (701.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4072337  bytes 796182172 (796.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5374162  bytes 849261776 (849.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5374162  bytes 849261776 (849.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3028417  bytes 701779239 (701.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4072439  bytes 796200936 (796.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5374297  bytes 849280370 (849.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5374297  bytes 849280370 (849.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3028509  bytes 701798849 (701.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4072550  bytes 796220847 (796.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5374445  bytes 849300874 (849.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5374445  bytes 849300874 (849.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3028568  bytes 701812336 (701.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4072630  bytes 796235296 (796.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5374559  bytes 849318144 (849.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5374559  bytes 849318144 (849.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3028635  bytes 701829977 (701.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4072719  bytes 796251006 (796.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5374687  bytes 849336224 (849.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5374687  bytes 849336224 (849.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3028704  bytes 701845261 (701.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4072809  bytes 796266342 (796.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5374833  bytes 849356649 (849.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5374833  bytes 849356649 (849.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3028782  bytes 701863248 (701.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4072909  bytes 796285157 (796.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5374963  bytes 849374921 (849.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5374963  bytes 849374921 (849.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3028858  bytes 701878454 (701.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4073003  bytes 796300983 (796.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5375096  bytes 849394434 (849.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5375096  bytes 849394434 (849.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3028941  bytes 701896533 (701.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4073102  bytes 796319677 (796.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5375231  bytes 849413030 (849.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5375231  bytes 849413030 (849.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3029002  bytes 701910092 (701.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4073180  bytes 796335274 (796.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5375350  bytes 849430560 (849.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5375350  bytes 849430560 (849.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3029070  bytes 701924890 (701.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4073268  bytes 796350400 (796.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5375494  bytes 849450823 (849.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5375494  bytes 849450823 (849.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3029133  bytes 701942373 (701.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4073353  bytes 796365847 (796.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5375621  bytes 849468867 (849.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5375621  bytes 849468867 (849.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3029226  bytes 701962126 (701.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4073467  bytes 796386267 (796.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5375757  bytes 849488737 (849.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5375757  bytes 849488737 (849.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3029310  bytes 701980183 (701.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4073570  bytes 796405347 (796.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5375893  bytes 849507378 (849.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5375893  bytes 849507378 (849.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3029371  bytes 701994074 (701.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4073652  bytes 796420064 (796.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5376016  bytes 849525092 (849.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5376016  bytes 849525092 (849.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3029444  bytes 702009565 (702.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4073742  bytes 796435655 (796.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5376163  bytes 849545498 (849.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5376163  bytes 849545498 (849.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3029501  bytes 702023262 (702.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4073820  bytes 796450063 (796.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5376284  bytes 849563108 (849.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5376284  bytes 849563108 (849.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3029579  bytes 702041665 (702.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4073925  bytes 796469147 (796.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5376424  bytes 849583202 (849.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5376424  bytes 849583202 (849.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3029660  bytes 702059684 (702.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4074026  bytes 796488029 (796.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5376563  bytes 849601998 (849.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5376563  bytes 849601998 (849.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3029739  bytes 702078453 (702.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4074122  bytes 796504397 (796.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5376687  bytes 849619862 (849.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5376687  bytes 849619862 (849.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3029806  bytes 702093216 (702.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4074212  bytes 796519720 (796.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5376826  bytes 849639910 (849.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5376826  bytes 849639910 (849.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3029863  bytes 702106623 (702.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4074290  bytes 796534081 (796.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5376943  bytes 849657348 (849.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5376943  bytes 849657348 (849.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3029947  bytes 702125434 (702.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4074397  bytes 796553813 (796.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5377083  bytes 849677380 (849.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5377083  bytes 849677380 (849.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3030034  bytes 702143578 (702.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4074503  bytes 796574126 (796.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5377219  bytes 849695994 (849.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5377219  bytes 849695994 (849.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3030097  bytes 702157400 (702.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4074578  bytes 796588304 (796.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5377332  bytes 849713080 (849.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5377332  bytes 849713080 (849.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3030164  bytes 702172207 (702.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4074677  bytes 796604329 (796.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5377481  bytes 849733802 (849.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5377481  bytes 849733802 (849.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3030231  bytes 702189560 (702.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4074766  bytes 796621300 (796.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5377606  bytes 849751762 (849.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5377606  bytes 849751762 (849.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3030322  bytes 702209717 (702.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4074880  bytes 796641051 (796.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5377750  bytes 849772028 (849.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5377750  bytes 849772028 (849.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3030406  bytes 702228317 (702.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4074984  bytes 796660360 (796.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5377881  bytes 849790255 (849.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5377881  bytes 849790255 (849.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3030465  bytes 702243460 (702.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4075065  bytes 796674894 (796.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5377997  bytes 849807605 (849.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5377997  bytes 849807605 (849.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3030536  bytes 702258763 (702.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4075159  bytes 796690484 (796.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5378145  bytes 849828218 (849.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5378145  bytes 849828218 (849.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3030595  bytes 702272341 (702.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4075241  bytes 796705215 (796.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5378268  bytes 849845932 (849.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5378268  bytes 849845932 (849.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3030682  bytes 702291349 (702.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4075349  bytes 796725218 (796.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5378403  bytes 849865612 (849.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5378403  bytes 849865612 (849.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3030765  bytes 702309528 (702.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4075450  bytes 796744300 (796.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5378536  bytes 849884060 (849.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5378536  bytes 849884060 (849.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3030836  bytes 702327350 (702.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4075540  bytes 796760181 (796.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5378665  bytes 849902228 (849.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5378665  bytes 849902228 (849.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3030905  bytes 702342352 (702.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4075634  bytes 796775759 (796.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5378801  bytes 849922062 (849.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5378801  bytes 849922062 (849.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3030964  bytes 702356087 (702.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4075714  bytes 796790332 (796.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5378922  bytes 849939708 (849.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5378922  bytes 849939708 (849.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3031056  bytes 702377110 (702.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4075827  bytes 796811150 (796.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5379058  bytes 849959508 (849.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5379058  bytes 849959508 (849.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3031144  bytes 702395770 (702.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4075937  bytes 796832389 (796.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5379201  bytes 849978500 (849.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5379201  bytes 849978500 (849.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3031210  bytes 702409760 (702.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4076017  bytes 796848145 (796.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5379319  bytes 849995954 (849.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5379319  bytes 849995954 (849.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3031292  bytes 702427165 (702.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4076117  bytes 796865887 (796.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5379462  bytes 850016218 (850.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5379462  bytes 850016218 (850.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3031360  bytes 702446238 (702.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4076207  bytes 796881872 (796.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5379597  bytes 850034736 (850.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5379597  bytes 850034736 (850.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3031448  bytes 702465783 (702.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4076323  bytes 796902025 (796.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5379734  bytes 850054588 (850.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5379734  bytes 850054588 (850.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3031535  bytes 702484785 (702.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4076432  bytes 796921607 (796.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5379873  bytes 850073399 (850.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5379873  bytes 850073399 (850.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
b'Error on request'
Token e243aac39fb012c084cfefeb2a6a3641 is maybe invalid 
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3031601  bytes 702499086 (702.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4076515  bytes 796936322 (796.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5379993  bytes 850090993 (850.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5379993  bytes 850090993 (850.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
b'Error on request'
Token e243aac39fb012c084cfefeb2a6a3641 is maybe invalid 
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3031668  bytes 702515781 (702.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4076608  bytes 796952342 (796.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5380132  bytes 850111003 (850.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5380132  bytes 850111003 (850.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3031725  bytes 702529144 (702.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4076685  bytes 796966553 (796.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5380264  bytes 850129223 (850.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5380264  bytes 850129223 (850.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3031812  bytes 702550505 (702.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4076799  bytes 796986792 (796.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5380408  bytes 850149501 (850.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5380408  bytes 850149501 (850.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3031885  bytes 702565060 (702.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4076887  bytes 797002553 (797.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5380540  bytes 850167745 (850.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5380540  bytes 850167745 (850.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3031979  bytes 702587715 (702.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4077001  bytes 797023902 (797.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5380677  bytes 850186469 (850.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5380677  bytes 850186469 (850.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3032055  bytes 702603285 (702.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4077096  bytes 797039670 (797.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5380814  bytes 850206353 (850.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5380814  bytes 850206353 (850.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3032119  bytes 702617511 (702.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4077179  bytes 797055407 (797.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5380938  bytes 850224158 (850.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5380938  bytes 850224158 (850.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3032197  bytes 702632956 (702.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4077267  bytes 797070891 (797.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5381068  bytes 850243492 (850.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5381068  bytes 850243492 (850.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3032274  bytes 702650488 (702.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4077368  bytes 797089710 (797.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5381201  bytes 850261868 (850.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5381201  bytes 850261868 (850.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3032356  bytes 702668333 (702.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4077468  bytes 797108672 (797.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5381340  bytes 850280591 (850.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5381340  bytes 850280591 (850.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3032433  bytes 702683984 (702.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4077560  bytes 797125804 (797.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5381476  bytes 850300445 (850.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5381476  bytes 850300445 (850.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3032499  bytes 702701141 (702.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4077645  bytes 797141271 (797.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5381616  bytes 850319175 (850.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5381616  bytes 850319175 (850.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3032566  bytes 702716501 (702.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4077736  bytes 797157662 (797.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5381746  bytes 850338493 (850.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5381746  bytes 850338493 (850.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3032643  bytes 702734543 (702.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4077838  bytes 797176536 (797.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5381885  bytes 850357331 (850.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5381885  bytes 850357331 (850.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3032729  bytes 702753086 (702.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4077942  bytes 797197434 (797.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5382021  bytes 850375935 (850.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5382021  bytes 850375935 (850.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3032799  bytes 702768289 (702.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4078033  bytes 797212806 (797.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5382158  bytes 850395817 (850.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5382158  bytes 850395817 (850.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3032860  bytes 702782303 (702.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4078121  bytes 797228050 (797.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5382290  bytes 850414098 (850.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5382290  bytes 850414098 (850.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3032929  bytes 702797049 (702.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4078209  bytes 797243224 (797.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5382421  bytes 850433468 (850.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5382421  bytes 850433468 (850.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3033005  bytes 702814688 (702.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4078313  bytes 797262346 (797.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5382558  bytes 850452178 (850.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5382558  bytes 850452178 (850.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3033101  bytes 702836842 (702.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4078425  bytes 797282626 (797.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5382707  bytes 850471589 (850.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5382707  bytes 850471589 (850.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3033168  bytes 702851577 (702.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4078511  bytes 797298765 (797.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5382842  bytes 850491213 (850.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5382842  bytes 850491213 (850.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3033236  bytes 702867151 (702.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4078600  bytes 797316171 (797.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5382982  bytes 850510064 (850.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5382982  bytes 850510064 (850.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3033305  bytes 702882337 (702.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4078690  bytes 797332205 (797.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5383116  bytes 850529590 (850.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5383116  bytes 850529590 (850.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3033392  bytes 702900493 (702.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4078788  bytes 797350901 (797.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5383243  bytes 850547718 (850.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5383243  bytes 850547718 (850.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3033469  bytes 702918162 (702.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4078886  bytes 797369563 (797.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5383378  bytes 850566140 (850.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5383378  bytes 850566140 (850.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3033539  bytes 702933304 (702.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4078978  bytes 797385169 (797.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5383508  bytes 850585600 (850.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5383508  bytes 850585600 (850.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3033604  bytes 702947134 (702.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4079066  bytes 797400377 (797.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5383655  bytes 850604942 (850.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5383655  bytes 850604942 (850.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3033685  bytes 702966599 (702.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4079158  bytes 797416947 (797.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5383778  bytes 850623766 (850.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5383778  bytes 850623766 (850.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3033758  bytes 702983947 (702.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4079255  bytes 797435379 (797.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5383909  bytes 850642066 (850.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5383909  bytes 850642066 (850.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3033849  bytes 703002554 (703.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4079361  bytes 797455816 (797.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5384056  bytes 850661364 (850.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5384056  bytes 850661364 (850.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3033911  bytes 703017097 (703.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4079447  bytes 797470808 (797.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5384188  bytes 850680928 (850.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5384188  bytes 850680928 (850.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3033973  bytes 703030955 (703.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4079526  bytes 797485272 (797.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5384317  bytes 850699029 (850.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5384317  bytes 850699029 (850.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3034039  bytes 703045721 (703.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4079617  bytes 797500837 (797.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5384453  bytes 850718683 (850.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5384453  bytes 850718683 (850.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3034120  bytes 703063588 (703.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4079720  bytes 797519871 (797.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5384584  bytes 850737045 (850.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5384584  bytes 850737045 (850.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3034216  bytes 703085658 (703.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4079834  bytes 797540300 (797.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5384727  bytes 850756156 (850.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5384727  bytes 850756156 (850.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3034288  bytes 703100796 (703.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4079921  bytes 797555969 (797.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5384859  bytes 850775802 (850.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5384859  bytes 850775802 (850.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3034343  bytes 703114317 (703.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4080000  bytes 797570428 (797.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5384978  bytes 850793308 (850.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5384978  bytes 850793308 (850.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3034407  bytes 703129027 (703.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4080087  bytes 797585433 (797.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5385118  bytes 850813220 (850.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5385118  bytes 850813220 (850.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3034486  bytes 703146654 (703.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4080189  bytes 797604214 (797.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5385249  bytes 850831570 (850.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5385249  bytes 850831570 (850.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3034565  bytes 703164419 (703.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4080288  bytes 797623071 (797.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5385385  bytes 850850174 (850.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5385385  bytes 850850174 (850.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
b'Error on request'
Token e243aac39fb012c084cfefeb2a6a3641 is maybe invalid 
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3034636  bytes 703179830 (703.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4080381  bytes 797639174 (797.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5385523  bytes 850870168 (850.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5385523  bytes 850870168 (850.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3034692  bytes 703193236 (703.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4080455  bytes 797653187 (797.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5385643  bytes 850887772 (850.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5385643  bytes 850887772 (850.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3034756  bytes 703207781 (703.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4080541  bytes 797668172 (797.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5385785  bytes 850907834 (850.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5385785  bytes 850907834 (850.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3034829  bytes 703224181 (703.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4080635  bytes 797686433 (797.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5385918  bytes 850926262 (850.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5385918  bytes 850926262 (850.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3034901  bytes 703239778 (703.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4080726  bytes 797701986 (797.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5386048  bytes 850944441 (850.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5386048  bytes 850944441 (850.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3034997  bytes 703259959 (703.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4080843  bytes 797723908 (797.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5386199  bytes 850965229 (850.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5386199  bytes 850965229 (850.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3035052  bytes 703273429 (703.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4080919  bytes 797738169 (797.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5386316  bytes 850982631 (850.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5386316  bytes 850982631 (850.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3035117  bytes 703287879 (703.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4081004  bytes 797753718 (797.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5386450  bytes 851002159 (851.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5386450  bytes 851002159 (851.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3035173  bytes 703301234 (703.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4081081  bytes 797767990 (797.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5386578  bytes 851020173 (851.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5386578  bytes 851020173 (851.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3035245  bytes 703318529 (703.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4081181  bytes 797786763 (797.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5386701  bytes 851038103 (851.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5386701  bytes 851038103 (851.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3035339  bytes 703338094 (703.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4081297  bytes 797806861 (797.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5386856  bytes 851059114 (851.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5386856  bytes 851059114 (851.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3035396  bytes 703351627 (703.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4081373  bytes 797821074 (797.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5386968  bytes 851076244 (851.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5386968  bytes 851076244 (851.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3035453  bytes 703366071 (703.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4081457  bytes 797835981 (797.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5387099  bytes 851095617 (851.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5387099  bytes 851095617 (851.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3035509  bytes 703379382 (703.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4081536  bytes 797850437 (797.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5387219  bytes 851113199 (851.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5387219  bytes 851113199 (851.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3035590  bytes 703397322 (703.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4081638  bytes 797869355 (797.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5387347  bytes 851131343 (851.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5387347  bytes 851131343 (851.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3035682  bytes 703416651 (703.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4081751  bytes 797889346 (797.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5387498  bytes 851152168 (851.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5387498  bytes 851152168 (851.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3035739  bytes 703430074 (703.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4081828  bytes 797903638 (797.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5387611  bytes 851169422 (851.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5387611  bytes 851169422 (851.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3035800  bytes 703444431 (703.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4081915  bytes 797918738 (797.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5387742  bytes 851188877 (851.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5387742  bytes 851188877 (851.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3035854  bytes 703457689 (703.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4081991  bytes 797932999 (797.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5387860  bytes 851206413 (851.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5387860  bytes 851206413 (851.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3035932  bytes 703475467 (703.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4082095  bytes 797952071 (797.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5387992  bytes 851224851 (851.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5387992  bytes 851224851 (851.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3036025  bytes 703494993 (703.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4082207  bytes 797972081 (797.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5388139  bytes 851245468 (851.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5388139  bytes 851245468 (851.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3036085  bytes 703508532 (703.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4082280  bytes 797986045 (797.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5388246  bytes 851262128 (851.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5388246  bytes 851262128 (851.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3036144  bytes 703522854 (703.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4082369  bytes 798001294 (798.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5388396  bytes 851282703 (851.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5388396  bytes 851282703 (851.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3036197  bytes 703535973 (703.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4082443  bytes 798015336 (798.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5388508  bytes 851299845 (851.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5388508  bytes 851299845 (851.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3036274  bytes 703553573 (703.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4082537  bytes 798033602 (798.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5388630  bytes 851317645 (851.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5388630  bytes 851317645 (851.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3036367  bytes 703572974 (703.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4082653  bytes 798053831 (798.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5388778  bytes 851338255 (851.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5388778  bytes 851338255 (851.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3036420  bytes 703586093 (703.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4082730  bytes 798068167 (798.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5388885  bytes 851355137 (851.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5388885  bytes 851355137 (851.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3036486  bytes 703600810 (703.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4082820  bytes 798083489 (798.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5389020  bytes 851374967 (851.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5389020  bytes 851374967 (851.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
b'Error on request'
Token e243aac39fb012c084cfefeb2a6a3641 is maybe invalid 
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3036540  bytes 703614304 (703.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4082894  bytes 798097595 (798.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5389134  bytes 851392059 (851.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5389134  bytes 851392059 (851.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3036611  bytes 703631564 (703.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4082995  bytes 798116428 (798.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5389263  bytes 851410291 (851.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5389263  bytes 851410291 (851.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/01102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3036704  bytes 703651289 (703.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4083109  bytes 798136505 (798.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5389413  bytes 851431066 (851.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5389413  bytes 851431066 (851.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/01/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
