erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3036761  bytes 703664684 (703.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4083190  bytes 798151460 (798.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5389537  bytes 851448938 (851.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5389537  bytes 851448938 (851.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/02/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3036840  bytes 703683685 (703.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4083286  bytes 798169257 (798.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5389667  bytes 851468331 (851.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5389667  bytes 851468331 (851.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/02/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3036902  bytes 703697669 (703.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4083367  bytes 798183930 (798.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5389790  bytes 851486115 (851.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5389790  bytes 851486115 (851.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/02/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3036984  bytes 703715777 (703.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4083471  bytes 798204524 (798.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5389918  bytes 851504259 (851.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5389918  bytes 851504259 (851.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/02/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3037083  bytes 703735696 (703.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4083590  bytes 798224828 (798.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5390077  bytes 851525621 (851.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5390077  bytes 851525621 (851.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/02/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3037144  bytes 703749327 (703.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4083670  bytes 798240489 (798.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5390194  bytes 851543023 (851.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5390194  bytes 851543023 (851.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/02/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3037208  bytes 703763865 (703.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4083754  bytes 798255324 (798.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5390324  bytes 851562377 (851.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5390324  bytes 851562377 (851.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/02/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3037272  bytes 703777716 (703.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4083839  bytes 798270156 (798.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5390451  bytes 851580362 (851.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5390451  bytes 851580362 (851.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/02/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3037349  bytes 703795276 (703.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4083938  bytes 798288776 (798.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5390579  bytes 851598568 (851.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5390579  bytes 851598568 (851.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/02/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3037456  bytes 703816149 (703.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4084064  bytes 798311022 (798.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5390734  bytes 851619660 (851.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5390734  bytes 851619660 (851.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/02/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3037515  bytes 703829863 (703.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4084141  bytes 798325330 (798.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5390854  bytes 851637218 (851.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5390854  bytes 851637218 (851.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/02/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3037579  bytes 703844444 (703.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4084227  bytes 798340368 (798.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5390982  bytes 851656432 (851.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5390982  bytes 851656432 (851.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/02/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3037644  bytes 703858769 (703.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4084310  bytes 798355400 (798.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5391102  bytes 851674089 (851.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5391102  bytes 851674089 (851.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/02/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3037709  bytes 703873945 (703.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4084397  bytes 798371808 (798.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5391223  bytes 851691833 (851.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5391223  bytes 851691833 (851.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/02/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3037837  bytes 703902248 (703.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4084558  bytes 798400974 (798.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5391454  bytes 851728737 (851.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5391454  bytes 851728737 (851.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/02/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3037973  bytes 703933725 (703.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4084723  bytes 798433451 (798.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5391708  bytes 851769563 (851.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5391708  bytes 851769563 (851.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/02/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3038035  bytes 703948127 (703.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4084812  bytes 798448640 (798.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5391832  bytes 851788569 (851.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5391832  bytes 851788569 (851.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/02/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3038094  bytes 703961661 (703.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4084892  bytes 798463117 (798.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5391958  bytes 851806583 (851.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5391958  bytes 851806583 (851.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/02/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3038294  bytes 703986187 (703.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4085275  bytes 798910116 (798.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5392169  bytes 852242982 (852.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5392169  bytes 852242982 (852.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/02/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3038375  bytes 704004901 (704.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4085383  bytes 798929522 (798.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5392299  bytes 852262658 (852.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5392299  bytes 852262658 (852.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/02/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3038455  bytes 704022782 (704.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4085485  bytes 798948545 (798.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5392438  bytes 852281479 (852.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5392438  bytes 852281479 (852.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/02/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3038517  bytes 704037124 (704.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4085564  bytes 798963038 (798.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5392555  bytes 852300069 (852.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5392555  bytes 852300069 (852.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/02/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3038572  bytes 704050503 (704.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4085646  bytes 798977688 (798.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5392680  bytes 852317986 (852.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5392680  bytes 852317986 (852.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/02/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3038630  bytes 704063954 (704.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4085728  bytes 798992366 (798.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5392797  bytes 852335388 (852.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5392797  bytes 852335388 (852.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/02/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3038712  bytes 704082477 (704.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4085837  bytes 799011755 (799.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5392937  bytes 852355658 (852.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5392937  bytes 852355658 (852.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/02/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3038798  bytes 704100619 (704.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4085943  bytes 799030983 (799.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5393081  bytes 852374738 (852.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5393081  bytes 852374738 (852.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/02/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3038866  bytes 704115452 (704.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4086030  bytes 799046091 (799.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5393207  bytes 852393848 (852.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5393207  bytes 852393848 (852.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/02/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3038924  bytes 704128967 (704.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4086110  bytes 799060577 (799.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5393336  bytes 852411949 (852.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5393336  bytes 852411949 (852.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/02/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3038981  bytes 704142553 (704.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4086187  bytes 799074845 (799.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5393459  bytes 852429687 (852.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5393459  bytes 852429687 (852.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/02/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3039068  bytes 704161618 (704.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4086297  bytes 799094338 (799.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5393607  bytes 852450311 (852.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5393607  bytes 852450311 (852.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/02/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3039162  bytes 704183571 (704.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4086405  bytes 799114453 (799.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5393753  bytes 852469578 (852.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5393753  bytes 852469578 (852.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/02/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3039233  bytes 704198879 (704.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4086494  bytes 799129583 (799.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5393878  bytes 852488506 (852.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5393878  bytes 852488506 (852.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/02/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3039287  bytes 704212110 (704.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4086576  bytes 799144266 (799.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5394006  bytes 852506673 (852.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5394006  bytes 852506673 (852.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/02/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3039345  bytes 704225647 (704.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4086653  bytes 799158541 (799.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5394127  bytes 852524389 (852.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5394127  bytes 852524389 (852.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/02/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3039429  bytes 704244583 (704.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4086760  bytes 799177840 (799.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5394265  bytes 852544281 (852.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5394265  bytes 852544281 (852.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/02/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3039512  bytes 704262694 (704.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4086866  bytes 799197206 (799.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5394404  bytes 852563140 (852.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5394404  bytes 852563140 (852.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/02/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3039578  bytes 704277340 (704.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4086952  bytes 799212303 (799.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5394528  bytes 852582170 (852.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5394528  bytes 852582170 (852.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/02/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3039635  bytes 704290703 (704.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4087032  bytes 799226807 (799.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5394652  bytes 852600128 (852.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5394652  bytes 852600128 (852.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/02/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3039693  bytes 704304194 (704.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4087108  bytes 799240975 (799.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5394760  bytes 852616944 (852.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5394760  bytes 852616944 (852.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/02/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3039770  bytes 704322497 (704.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4087214  bytes 799260228 (799.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5394895  bytes 852636920 (852.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5394895  bytes 852636920 (852.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/02/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3039851  bytes 704340272 (704.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4087314  bytes 799278995 (799.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5395028  bytes 852655404 (852.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5395028  bytes 852655404 (852.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/02/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3039911  bytes 704354657 (704.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4087401  bytes 799294105 (799.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5395152  bytes 852674434 (852.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5395152  bytes 852674434 (852.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/02/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3039964  bytes 704367839 (704.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4087480  bytes 799308550 (799.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5395267  bytes 852691735 (852.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5395267  bytes 852691735 (852.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/02/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3040019  bytes 704381198 (704.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4087559  bytes 799323044 (799.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5395386  bytes 852709277 (852.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5395386  bytes 852709277 (852.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/02/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3040105  bytes 704400162 (704.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4087668  bytes 799342472 (799.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5395525  bytes 852729457 (852.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5395525  bytes 852729457 (852.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/02/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3040194  bytes 704418443 (704.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4087771  bytes 799361587 (799.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5395652  bytes 852747629 (852.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5395652  bytes 852747629 (852.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/02/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3040253  bytes 704432657 (704.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4087854  bytes 799376414 (799.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5395770  bytes 852766323 (852.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5395770  bytes 852766323 (852.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/02/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3040310  bytes 704446040 (704.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4087929  bytes 799390592 (799.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5395889  bytes 852783853 (852.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5395889  bytes 852783853 (852.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/02/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3040364  bytes 704459215 (704.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4088006  bytes 799404942 (799.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5396011  bytes 852801553 (852.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5396011  bytes 852801553 (852.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/02/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3040455  bytes 704478497 (704.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4088121  bytes 799424868 (799.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5396156  bytes 852822091 (852.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5396156  bytes 852822091 (852.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/02/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3040538  bytes 704496636 (704.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4088223  bytes 799443895 (799.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5396293  bytes 852840809 (852.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5396293  bytes 852840809 (852.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/02/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3040601  bytes 704511030 (704.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4088307  bytes 799458816 (799.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5396421  bytes 852860023 (852.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5396421  bytes 852860023 (852.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/02/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3040655  bytes 704524281 (704.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4088384  bytes 799473090 (799.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5396542  bytes 852877657 (852.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5396542  bytes 852877657 (852.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/02/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3040711  bytes 704537616 (704.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4088462  bytes 799487478 (799.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5396669  bytes 852895618 (852.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5396669  bytes 852895618 (852.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/02/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3040798  bytes 704556648 (704.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4088572  bytes 799507000 (799.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5396814  bytes 852916126 (852.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5396814  bytes 852916126 (852.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/02/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3040861  bytes 704570331 (704.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4088651  bytes 799521610 (799.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5396941  bytes 852934109 (852.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5396941  bytes 852934109 (852.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/02/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3040949  bytes 704589253 (704.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4088759  bytes 799541050 (799.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5397076  bytes 852953899 (852.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5397076  bytes 852953899 (852.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/02/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3041008  bytes 704602966 (704.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4088837  bytes 799555420 (799.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5397196  bytes 852971481 (852.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5397196  bytes 852971481 (852.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/02/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3041064  bytes 704616357 (704.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4088914  bytes 799569698 (799.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5397326  bytes 852989597 (852.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5397326  bytes 852989597 (852.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/02/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3041131  bytes 704631236 (704.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4089004  bytes 799585080 (799.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5397460  bytes 853009317 (853.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5397460  bytes 853009317 (853.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
 file /home/nano/.log/2025/10/02/decision/decision_log.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3041212  bytes 704652209 (704.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4089112  bytes 799604996 (799.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5397595  bytes 853027939 (853.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5397595  bytes 853027939 (853.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3041304  bytes 704671679 (704.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4089223  bytes 799624640 (799.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5397738  bytes 853048112 (853.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5397738  bytes 853048112 (853.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
b'Error on request'
Token e243aac39fb012c084cfefeb2a6a3641 is maybe invalid 
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3041360  bytes 704685021 (704.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4089300  bytes 799638934 (799.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5397854  bytes 853065498 (853.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5397854  bytes 853065498 (853.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3041417  bytes 704698460 (704.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4089378  bytes 799653214 (799.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5397987  bytes 853083794 (853.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5397987  bytes 853083794 (853.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3041477  bytes 704712842 (704.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4089464  bytes 799668195 (799.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5398117  bytes 853103312 (853.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5398117  bytes 853103312 (853.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3041552  bytes 704730570 (704.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4089566  bytes 799687067 (799.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5398250  bytes 853121848 (853.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5398250  bytes 853121848 (853.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3041643  bytes 704749686 (704.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4089676  bytes 799706798 (799.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5398391  bytes 853141953 (853.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5398391  bytes 853141953 (853.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3041704  bytes 704763281 (704.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4089749  bytes 799720781 (799.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5398509  bytes 853159407 (853.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5398509  bytes 853159407 (853.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3041762  bytes 704776724 (704.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4089830  bytes 799735332 (799.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5398632  bytes 853177219 (853.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5398632  bytes 853177219 (853.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3041829  bytes 704791620 (704.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4089920  bytes 799750620 (799.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5398766  bytes 853196945 (853.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5398766  bytes 853196945 (853.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3041905  bytes 704809176 (704.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4090020  bytes 799769393 (799.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5398900  bytes 853215463 (853.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5398900  bytes 853215463 (853.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3042000  bytes 704828518 (704.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4090130  bytes 799789090 (799.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5399041  bytes 853235474 (853.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5399041  bytes 853235474 (853.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3042054  bytes 704841757 (704.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4090205  bytes 799803273 (799.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5399155  bytes 853252720 (853.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5399155  bytes 853252720 (853.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
b'Error on request'
Token e243aac39fb012c084cfefeb2a6a3641 is maybe invalid 
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3042113  bytes 704855449 (704.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4090288  bytes 799818102 (799.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5399282  bytes 853270869 (853.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5399282  bytes 853270869 (853.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3042181  bytes 704870324 (704.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4090374  bytes 799833161 (799.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5399408  bytes 853290145 (853.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5399408  bytes 853290145 (853.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3042251  bytes 704887556 (704.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4090472  bytes 799851734 (799.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5399526  bytes 853307615 (853.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5399526  bytes 853307615 (853.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3042340  bytes 704906620 (704.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4090582  bytes 799871549 (799.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5399667  bytes 853327744 (853.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5399667  bytes 853327744 (853.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3042393  bytes 704919807 (704.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4090658  bytes 799885842 (799.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5399780  bytes 853344938 (853.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5399780  bytes 853344938 (853.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3042451  bytes 704933458 (704.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4090737  bytes 799900349 (799.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5399902  bytes 853362675 (853.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5399902  bytes 853362675 (853.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3042513  bytes 704947880 (704.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4090826  bytes 799915577 (799.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5400033  bytes 853382175 (853.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5400033  bytes 853382175 (853.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3042585  bytes 704965184 (704.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4090928  bytes 799934442 (799.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5400162  bytes 853400417 (853.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5400162  bytes 853400417 (853.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3042676  bytes 704984676 (704.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4091044  bytes 799954617 (799.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5400312  bytes 853421158 (853.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5400312  bytes 853421158 (853.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3042735  bytes 704998167 (704.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4091123  bytes 799969064 (799.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5400428  bytes 853438508 (853.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5400428  bytes 853438508 (853.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3042791  bytes 705011510 (705.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4091201  bytes 799983381 (799.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5400545  bytes 853455946 (853.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5400545  bytes 853455946 (853.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3042856  bytes 705026197 (705.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4091290  bytes 799998682 (799.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5400688  bytes 853476202 (853.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5400688  bytes 853476202 (853.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3042930  bytes 705043652 (705.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4091392  bytes 800017534 (800.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5400813  bytes 853494252 (853.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5400813  bytes 853494252 (853.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3043016  bytes 705062422 (705.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4091501  bytes 800037133 (800.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5400950  bytes 853514149 (853.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5400950  bytes 853514149 (853.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3043069  bytes 705075689 (705.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4091578  bytes 800051476 (800.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5401075  bytes 853531991 (853.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5401075  bytes 853531991 (853.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3043123  bytes 705088932 (705.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4091654  bytes 800065717 (800.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5401191  bytes 853549341 (853.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5401191  bytes 853549341 (853.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3043190  bytes 705103962 (705.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4091749  bytes 800081381 (800.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5401339  bytes 853569893 (853.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5401339  bytes 853569893 (853.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3043269  bytes 705121638 (705.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4091854  bytes 800101488 (800.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5401477  bytes 853588663 (853.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5401477  bytes 853588663 (853.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3043373  bytes 705145297 (705.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4091981  bytes 800123512 (800.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5401627  bytes 853609271 (853.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5401627  bytes 853609271 (853.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3043427  bytes 705158592 (705.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4092056  bytes 800137602 (800.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5401751  bytes 853627061 (853.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5401751  bytes 853627061 (853.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3043482  bytes 705171883 (705.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4092130  bytes 800151674 (800.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5401872  bytes 853644671 (853.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5401872  bytes 853644671 (853.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3043549  bytes 705186673 (705.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4092219  bytes 800166761 (800.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5402019  bytes 853665089 (853.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5402019  bytes 853665089 (853.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3043626  bytes 705203466 (705.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4092316  bytes 800185916 (800.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5402155  bytes 853683673 (853.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5402155  bytes 853683673 (853.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3043701  bytes 705219787 (705.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4092411  bytes 800201835 (800.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5402292  bytes 853703538 (853.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5402292  bytes 853703538 (853.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3043783  bytes 705237893 (705.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4092513  bytes 800220734 (800.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5402419  bytes 853721706 (853.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5402419  bytes 853721706 (853.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3043837  bytes 705251132 (705.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4092590  bytes 800235041 (800.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5402541  bytes 853739368 (853.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5402541  bytes 853739368 (853.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3043902  bytes 705265879 (705.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4092679  bytes 800250420 (800.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5402686  bytes 853759683 (853.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5402686  bytes 853759683 (853.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3043958  bytes 705279457 (705.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4092758  bytes 800264795 (800.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5402814  bytes 853777697 (853.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5402814  bytes 853777697 (853.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3044040  bytes 705298115 (705.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4092864  bytes 800284036 (800.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5402954  bytes 853797787 (853.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5402954  bytes 853797787 (853.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3044132  bytes 705316626 (705.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4092972  bytes 800305732 (800.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5403096  bytes 853816728 (853.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5403096  bytes 853816728 (853.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3044190  bytes 705330208 (705.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4093046  bytes 800319809 (800.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5403211  bytes 853834026 (853.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5403211  bytes 853834026 (853.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3044262  bytes 705345428 (705.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4093141  bytes 800335512 (800.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5403361  bytes 853854659 (853.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5403361  bytes 853854659 (853.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3044317  bytes 705358726 (705.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4093218  bytes 800349882 (800.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5403470  bytes 853871669 (853.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5403470  bytes 853871669 (853.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3044395  bytes 705377165 (705.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4093326  bytes 800369248 (800.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5403601  bytes 853891209 (853.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5403601  bytes 853891209 (853.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3044474  bytes 705395006 (705.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4093431  bytes 800388520 (800.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5403733  bytes 853909642 (853.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5403733  bytes 853909642 (853.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3044527  bytes 705408129 (705.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4093504  bytes 800402499 (800.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5403842  bytes 853926462 (853.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5403842  bytes 853926462 (853.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
b'Error on request'
Token e243aac39fb012c084cfefeb2a6a3641 is maybe invalid 
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3044594  bytes 705422912 (705.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4093600  bytes 800418243 (800.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5403981  bytes 853946640 (853.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5403981  bytes 853946640 (853.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3044649  bytes 705436267 (705.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4093680  bytes 800432740 (800.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5404095  bytes 853963946 (853.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5404095  bytes 853963946 (853.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3044725  bytes 705454502 (705.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4093780  bytes 800451542 (800.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5404231  bytes 853983808 (853.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5404231  bytes 853983808 (853.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3044804  bytes 705472259 (705.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4093876  bytes 800470152 (800.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5404356  bytes 854001722 (854.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5404356  bytes 854001722 (854.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3044862  bytes 705485839 (705.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4093957  bytes 800484720 (800.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5404476  bytes 854019350 (854.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5404476  bytes 854019350 (854.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3044925  bytes 705500426 (705.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4094049  bytes 800500143 (800.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5404622  bytes 854039831 (854.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5404622  bytes 854039831 (854.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3044979  bytes 705513753 (705.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4094124  bytes 800514302 (800.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5404731  bytes 854056723 (854.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5404731  bytes 854056723 (854.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3045063  bytes 705532539 (705.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4094232  bytes 800533803 (800.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5404862  bytes 854076325 (854.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5404862  bytes 854076325 (854.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3045149  bytes 705550610 (705.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4094337  bytes 800553169 (800.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5404991  bytes 854094565 (854.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5404991  bytes 854094565 (854.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3045206  bytes 705564025 (705.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4094415  bytes 800567454 (800.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5405106  bytes 854111923 (854.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5405106  bytes 854111923 (854.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3045267  bytes 705578375 (705.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4094503  bytes 800582640 (800.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5405241  bytes 854131682 (854.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5405241  bytes 854131682 (854.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3045329  bytes 705595614 (705.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4094592  bytes 800598489 (800.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5405361  bytes 854149382 (854.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5405361  bytes 854149382 (854.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3045411  bytes 705614623 (705.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4094704  bytes 800618166 (800.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5405493  bytes 854168998 (854.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5405493  bytes 854168998 (854.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3045496  bytes 705632712 (705.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4094806  bytes 800637119 (800.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5405625  bytes 854187343 (854.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5405625  bytes 854187343 (854.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3045552  bytes 705646083 (705.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4094884  bytes 800651483 (800.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5405737  bytes 854204545 (854.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5405737  bytes 854204545 (854.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3045619  bytes 705660970 (705.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4094975  bytes 800666883 (800.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5405868  bytes 854224115 (854.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5405868  bytes 854224115 (854.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3045677  bytes 705674381 (705.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4095051  bytes 800681111 (800.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5405987  bytes 854241696 (854.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5405987  bytes 854241696 (854.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3045760  bytes 705692965 (705.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4095160  bytes 800700500 (800.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5406123  bytes 854261520 (854.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5406123  bytes 854261520 (854.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3045842  bytes 705710693 (705.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4095260  bytes 800719341 (800.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5406242  bytes 854279231 (854.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5406242  bytes 854279231 (854.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3045895  bytes 705724070 (705.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4095338  bytes 800733720 (800.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5406360  bytes 854296721 (854.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5406360  bytes 854296721 (854.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3045964  bytes 705739069 (705.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4095429  bytes 800749145 (800.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5406492  bytes 854316413 (854.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5406492  bytes 854316413 (854.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3046017  bytes 705752292 (705.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4095506  bytes 800763424 (800.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5406616  bytes 854334217 (854.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5406616  bytes 854334217 (854.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3046100  bytes 705771014 (705.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4095618  bytes 800782969 (800.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5406751  bytes 854354035 (854.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5406751  bytes 854354035 (854.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3046178  bytes 705788725 (705.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4095716  bytes 800801829 (800.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5406876  bytes 854372068 (854.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5406876  bytes 854372068 (854.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3046235  bytes 705802152 (705.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4095792  bytes 800816082 (800.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5406985  bytes 854389090 (854.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5406985  bytes 854389090 (854.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3046303  bytes 705817010 (705.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4095880  bytes 800831292 (800.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5407110  bytes 854408314 (854.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5407110  bytes 854408314 (854.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3046358  bytes 705830352 (705.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4095961  bytes 800845874 (800.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5407231  bytes 854425911 (854.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5407231  bytes 854425911 (854.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3046383  bytes 705836089 (705.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4096002  bytes 800851308 (800.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5407266  bytes 854429451 (854.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5407266  bytes 854429451 (854.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3046438  bytes 705848883 (705.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4096077  bytes 800865069 (800.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5407304  bytes 854432068 (854.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5407304  bytes 854432068 (854.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3046455  bytes 705853370 (705.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4096106  bytes 800869504 (800.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5407322  bytes 854433348 (854.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5407322  bytes 854433348 (854.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3046483  bytes 705859345 (705.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4096145  bytes 800874749 (800.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5407352  bytes 854436610 (854.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5407352  bytes 854436610 (854.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3046502  bytes 705863924 (705.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4096176  bytes 800879300 (800.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5407379  bytes 854438408 (854.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5407379  bytes 854438408 (854.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3046529  bytes 705869753 (705.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4096216  bytes 800884593 (800.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5407408  bytes 854441516 (854.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5407408  bytes 854441516 (854.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3046569  bytes 705878525 (705.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4096279  bytes 800894748 (800.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5407441  bytes 854443806 (854.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5407441  bytes 854443806 (854.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3046631  bytes 705891751 (705.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4096353  bytes 800908403 (800.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5407518  bytes 854453593 (854.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5407518  bytes 854453593 (854.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3046694  bytes 705906356 (705.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4096439  bytes 800923452 (800.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5407648  bytes 854473157 (854.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5407648  bytes 854473157 (854.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3046749  bytes 705919646 (705.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4096521  bytes 800938148 (800.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5407770  bytes 854490903 (854.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5407770  bytes 854490903 (854.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3046808  bytes 705933864 (705.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4096604  bytes 800952932 (800.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5407893  bytes 854509881 (854.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5407893  bytes 854509881 (854.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3046882  bytes 705951283 (705.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4096705  bytes 800971706 (800.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5408020  bytes 854527983 (854.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5408020  bytes 854527983 (854.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3046963  bytes 705969271 (705.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4096806  bytes 800990741 (800.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5408155  bytes 854546560 (854.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5408155  bytes 854546560 (854.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3047039  bytes 705984571 (705.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4096893  bytes 801005903 (801.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5408278  bytes 854565620 (854.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5408278  bytes 854565620 (854.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3047098  bytes 706001428 (706.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4096982  bytes 801021750 (801.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5408407  bytes 854583944 (854.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5408407  bytes 854583944 (854.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3047163  bytes 706016367 (706.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4097075  bytes 801037208 (801.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5408529  bytes 854602916 (854.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5408529  bytes 854602916 (854.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3047236  bytes 706033882 (706.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4097176  bytes 801055945 (801.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5408659  bytes 854621210 (854.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5408659  bytes 854621210 (854.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3047314  bytes 706051635 (706.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4097276  bytes 801074898 (801.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5408776  bytes 854638673 (854.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5408776  bytes 854638673 (854.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3047382  bytes 706066526 (706.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4097367  bytes 801090278 (801.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5408907  bytes 854658267 (854.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5408907  bytes 854658267 (854.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3047439  bytes 706079921 (706.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4097450  bytes 801105036 (801.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5409040  bytes 854676730 (854.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5409040  bytes 854676730 (854.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3047498  bytes 706094234 (706.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4097532  bytes 801119745 (801.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5409156  bytes 854695166 (854.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5409156  bytes 854695166 (854.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3047570  bytes 706111634 (706.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4097633  bytes 801138536 (801.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5409290  bytes 854713646 (854.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5409290  bytes 854713646 (854.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3047652  bytes 706129568 (706.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4097737  bytes 801157687 (801.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5409420  bytes 854732037 (854.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5409420  bytes 854732037 (854.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3047718  bytes 706144303 (706.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4097826  bytes 801172952 (801.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5409548  bytes 854751475 (854.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5409548  bytes 854751475 (854.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3047775  bytes 706157606 (706.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4097905  bytes 801187351 (801.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5409665  bytes 854768915 (854.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5409665  bytes 854768915 (854.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3047838  bytes 706172171 (706.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4097990  bytes 801202338 (801.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5409789  bytes 854787957 (854.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5409789  bytes 854787957 (854.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3047918  bytes 706189903 (706.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4098094  bytes 801221427 (801.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5409913  bytes 854805881 (854.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5409913  bytes 854805881 (854.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3048000  bytes 706207971 (706.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4098199  bytes 801240659 (801.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5410046  bytes 854824330 (854.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5410046  bytes 854824330 (854.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3048070  bytes 706223049 (706.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4098293  bytes 801256241 (801.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5410176  bytes 854843850 (854.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5410176  bytes 854843850 (854.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3048126  bytes 706236515 (706.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4098369  bytes 801270478 (801.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5410289  bytes 854861044 (854.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5410289  bytes 854861044 (854.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3048185  bytes 706250793 (706.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4098454  bytes 801285438 (801.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5410420  bytes 854880452 (854.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5410420  bytes 854880452 (854.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3048258  bytes 706268264 (706.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4098557  bytes 801304380 (801.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5410552  bytes 854898972 (854.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5410552  bytes 854898972 (854.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3048339  bytes 706286061 (706.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4098655  bytes 801323142 (801.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5410675  bytes 854916863 (854.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5410675  bytes 854916863 (854.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3048405  bytes 706300891 (706.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4098745  bytes 801338536 (801.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5410803  bytes 854936219 (854.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5410803  bytes 854936219 (854.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3048463  bytes 706314390 (706.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4098822  bytes 801352859 (801.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5410922  bytes 854953785 (854.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5410922  bytes 854953785 (854.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3048525  bytes 706328724 (706.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4098907  bytes 801367803 (801.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5411046  bytes 854972830 (854.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5411046  bytes 854972830 (854.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3048601  bytes 706346275 (706.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4099009  bytes 801386675 (801.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5411174  bytes 854991034 (854.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5411174  bytes 854991034 (854.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3048678  bytes 706363861 (706.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4099107  bytes 801405434 (801.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5411307  bytes 855009544 (855.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5411307  bytes 855009544 (855.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3048742  bytes 706378451 (706.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4099194  bytes 801420578 (801.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5411438  bytes 855029114 (855.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5411438  bytes 855029114 (855.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3048800  bytes 706391898 (706.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4099273  bytes 801435033 (801.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5411557  bytes 855046680 (855.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5411557  bytes 855046680 (855.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3048865  bytes 706406555 (706.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4099360  bytes 801450172 (801.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5411687  bytes 855066036 (855.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5411687  bytes 855066036 (855.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3048919  bytes 706419882 (706.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4099442  bytes 801464908 (801.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5411814  bytes 855084142 (855.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5411814  bytes 855084142 (855.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3049019  bytes 706441900 (706.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4099563  bytes 801488273 (801.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5411953  bytes 855102913 (855.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5411953  bytes 855102913 (855.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3049086  bytes 706456752 (706.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4099655  bytes 801503737 (801.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5412083  bytes 855122431 (855.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5412083  bytes 855122431 (855.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3049148  bytes 706473619 (706.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4099738  bytes 801519151 (801.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5412198  bytes 855139895 (855.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5412198  bytes 855139895 (855.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3049211  bytes 706488399 (706.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4099825  bytes 801534226 (801.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5412326  bytes 855159148 (855.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5412326  bytes 855159148 (855.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3049266  bytes 706501757 (706.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4099902  bytes 801548463 (801.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5412443  bytes 855176544 (855.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5412443  bytes 855176544 (855.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3049343  bytes 706519444 (706.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4100006  bytes 801567714 (801.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5412582  bytes 855195466 (855.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5412582  bytes 855195466 (855.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3049430  bytes 706538540 (706.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4100115  bytes 801587270 (801.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5412714  bytes 855215206 (855.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5412714  bytes 855215206 (855.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3049486  bytes 706551779 (706.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4100188  bytes 801601324 (801.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5412822  bytes 855232140 (855.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5412822  bytes 855232140 (855.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3049546  bytes 706566101 (706.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4100277  bytes 801616556 (801.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5412951  bytes 855251504 (855.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5412951  bytes 855251504 (855.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3049600  bytes 706579296 (706.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4100351  bytes 801630665 (801.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5413060  bytes 855268490 (855.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5413060  bytes 855268490 (855.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3049674  bytes 706596858 (706.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4100449  bytes 801649284 (801.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5413181  bytes 855286332 (855.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5413181  bytes 855286332 (855.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3049765  bytes 706616096 (706.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4100559  bytes 801669013 (801.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5413332  bytes 855307158 (855.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5413332  bytes 855307158 (855.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3049818  bytes 706629283 (706.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4100633  bytes 801683122 (801.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5413434  bytes 855323626 (855.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5413434  bytes 855323626 (855.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3049881  bytes 706643832 (706.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4100727  bytes 801698787 (801.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5413571  bytes 855343523 (855.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5413571  bytes 855343523 (855.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3049934  bytes 706657087 (706.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4100804  bytes 801713098 (801.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5413682  bytes 855360649 (855.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5413682  bytes 855360649 (855.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3050007  bytes 706674543 (706.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4100900  bytes 801731503 (801.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5413802  bytes 855378223 (855.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5413802  bytes 855378223 (855.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3050096  bytes 706693760 (706.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4101013  bytes 801751481 (801.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5413950  bytes 855398915 (855.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5413950  bytes 855398915 (855.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3050156  bytes 706707386 (706.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4101092  bytes 801765879 (801.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5414066  bytes 855416301 (855.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5414066  bytes 855416301 (855.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3050217  bytes 706721624 (706.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4101179  bytes 801780951 (801.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5414196  bytes 855435835 (855.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5414196  bytes 855435835 (855.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3050269  bytes 706734679 (706.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4101249  bytes 801794780 (801.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5414297  bytes 855452251 (855.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5414297  bytes 855452251 (855.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3050343  bytes 706752078 (706.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4101349  bytes 801813540 (801.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5414421  bytes 855470331 (855.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5414421  bytes 855470331 (855.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3050435  bytes 706771540 (706.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4101465  bytes 801833729 (801.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5414570  bytes 855491076 (855.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5414570  bytes 855491076 (855.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3050489  bytes 706784838 (706.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4101542  bytes 801848043 (801.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5414682  bytes 855508218 (855.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5414682  bytes 855508218 (855.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3050554  bytes 706799384 (706.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4101628  bytes 801863073 (801.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5414806  bytes 855527298 (855.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5414806  bytes 855527298 (855.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3050612  bytes 706812843 (706.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4101705  bytes 801877348 (801.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5414924  bytes 855544776 (855.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5414924  bytes 855544776 (855.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3050686  bytes 706830334 (706.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4101807  bytes 801896192 (801.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5415047  bytes 855562660 (855.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5415047  bytes 855562660 (855.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3050776  bytes 706849595 (706.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4101922  bytes 801916270 (801.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5415197  bytes 855583472 (855.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5415197  bytes 855583472 (855.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3050835  bytes 706863114 (706.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4102003  bytes 801930849 (801.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5415311  bytes 855600742 (855.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5415311  bytes 855600742 (855.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3050899  bytes 706877576 (706.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4102089  bytes 801945847 (801.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5415432  bytes 855619628 (855.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5415432  bytes 855619628 (855.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3050958  bytes 706891086 (706.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4102169  bytes 801960347 (801.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5415553  bytes 855637300 (855.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5415553  bytes 855637300 (855.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3051030  bytes 706908398 (706.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4102268  bytes 801978930 (801.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5415674  bytes 855655028 (855.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5415674  bytes 855655028 (855.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3051125  bytes 706928183 (706.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4102385  bytes 801999144 (801.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5415821  bytes 855675623 (855.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5415821  bytes 855675623 (855.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3051194  bytes 706948595 (706.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4102481  bytes 802016060 (802.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5415948  bytes 855693781 (855.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5415948  bytes 855693781 (855.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3051261  bytes 706964098 (706.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4102574  bytes 802031499 (802.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5416069  bytes 855712631 (855.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5416069  bytes 855712631 (855.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3051317  bytes 706977441 (706.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4102655  bytes 802046069 (802.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5416194  bytes 855730511 (855.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5416194  bytes 855730511 (855.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3051388  bytes 706994616 (706.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4102752  bytes 802064538 (802.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5416316  bytes 855748451 (855.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5416316  bytes 855748451 (855.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3051480  bytes 707013963 (707.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4102866  bytes 802084515 (802.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5416467  bytes 855769358 (855.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5416467  bytes 855769358 (855.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
b'Error on request'
Token e243aac39fb012c084cfefeb2a6a3641 is maybe invalid 
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3051538  bytes 707027496 (707.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4102945  bytes 802098932 (802.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5416588  bytes 855786940 (855.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5416588  bytes 855786940 (855.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3051596  bytes 707041686 (707.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4103028  bytes 802113760 (802.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5416710  bytes 855805842 (855.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5416710  bytes 855805842 (855.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3051652  bytes 707054993 (707.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4103104  bytes 802127945 (802.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5416834  bytes 855823682 (855.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5416834  bytes 855823682 (855.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3051718  bytes 707072339 (707.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4103197  bytes 802144067 (802.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5416960  bytes 855841806 (855.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5416960  bytes 855841806 (855.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3051828  bytes 707096143 (707.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4103330  bytes 802168203 (802.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5417107  bytes 855862531 (855.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5417107  bytes 855862531 (855.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3051888  bytes 707109750 (707.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4103409  bytes 802182694 (802.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5417222  bytes 855879889 (855.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5417222  bytes 855879889 (855.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3051948  bytes 707124028 (707.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4103495  bytes 802197704 (802.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5417339  bytes 855898531 (855.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5417339  bytes 855898531 (855.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3052007  bytes 707137554 (707.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4103576  bytes 802212266 (802.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5417465  bytes 855916440 (855.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5417465  bytes 855916440 (855.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3052061  bytes 707150801 (707.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4103654  bytes 802226699 (802.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5417579  bytes 855933746 (855.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5417579  bytes 855933746 (855.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3052148  bytes 707169821 (707.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4103766  bytes 802246526 (802.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5417715  bytes 855953690 (855.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5417715  bytes 855953690 (855.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3052236  bytes 707191533 (707.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4103873  bytes 802266466 (802.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5417849  bytes 855972282 (855.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5417849  bytes 855972282 (855.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3052300  bytes 707206091 (707.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4103961  bytes 802281620 (802.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5417971  bytes 855991220 (855.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5417971  bytes 855991220 (855.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3052352  bytes 707219281 (707.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4104040  bytes 802296122 (802.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5418084  bytes 856008452 (856.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5418084  bytes 856008452 (856.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3052404  bytes 707232392 (707.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4104118  bytes 802310507 (802.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5418192  bytes 856025410 (856.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5418192  bytes 856025410 (856.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3052491  bytes 707251382 (707.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4104228  bytes 802329984 (802.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5418339  bytes 856046016 (856.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5418339  bytes 856046016 (856.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3052571  bytes 707269330 (707.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4104326  bytes 802348801 (802.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5418470  bytes 856064277 (856.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5418470  bytes 856064277 (856.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3052633  bytes 707283791 (707.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4104411  bytes 802363784 (802.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5418588  bytes 856082919 (856.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5418588  bytes 856082919 (856.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3052688  bytes 707297126 (707.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4104496  bytes 802378647 (802.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5418719  bytes 856101277 (856.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5418719  bytes 856101277 (856.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3052754  bytes 707314480 (707.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4104585  bytes 802394402 (802.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5418843  bytes 856119173 (856.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5418843  bytes 856119173 (856.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3052844  bytes 707333980 (707.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4104698  bytes 802414267 (802.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5418979  bytes 856139055 (856.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5418979  bytes 856139055 (856.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3052929  bytes 707352045 (707.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4104804  bytes 802433537 (802.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5419110  bytes 856157462 (856.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5419110  bytes 856157462 (856.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3052995  bytes 707366779 (707.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4104892  bytes 802448771 (802.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5419235  bytes 856176544 (856.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5419235  bytes 856176544 (856.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3053054  bytes 707380250 (707.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4104972  bytes 802463243 (802.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5419359  bytes 856194493 (856.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5419359  bytes 856194493 (856.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3053112  bytes 707393732 (707.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4105049  bytes 802477538 (802.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5419464  bytes 856211187 (856.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5419464  bytes 856211187 (856.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3053201  bytes 707412933 (707.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4105165  bytes 802497498 (802.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5419603  bytes 856231343 (856.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5419603  bytes 856231343 (856.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3053297  bytes 707435057 (707.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4105281  bytes 802518278 (802.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5419743  bytes 856250297 (856.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5419743  bytes 856250297 (856.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3053371  bytes 707451209 (707.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4105374  bytes 802533713 (802.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5419868  bytes 856269379 (856.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5419868  bytes 856269379 (856.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3053427  bytes 707464544 (707.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4105455  bytes 802548291 (802.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5419978  bytes 856286417 (856.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5419978  bytes 856286417 (856.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3053479  bytes 707477698 (707.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4105533  bytes 802562734 (802.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5420103  bytes 856304310 (856.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5420103  bytes 856304310 (856.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3053563  bytes 707496405 (707.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4105644  bytes 802582301 (802.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5420240  bytes 856324390 (856.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5420240  bytes 856324390 (856.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3053645  bytes 707514334 (707.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4105748  bytes 802601470 (802.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5420372  bytes 856342786 (856.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5420372  bytes 856342786 (856.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3053715  bytes 707529318 (707.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4105839  bytes 802616884 (802.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5420501  bytes 856362158 (856.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5420501  bytes 856362158 (856.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3053770  bytes 707542541 (707.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4105914  bytes 802631035 (802.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5420609  bytes 856379092 (856.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5420609  bytes 856379092 (856.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3053836  bytes 707559887 (707.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4106006  bytes 802646988 (802.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5420740  bytes 856397367 (856.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5420740  bytes 856397367 (856.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3053922  bytes 707578991 (707.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4106120  bytes 802666803 (802.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5420880  bytes 856417577 (856.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5420880  bytes 856417577 (856.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3054008  bytes 707597125 (707.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4106223  bytes 802685908 (802.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5421017  bytes 856436296 (856.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5421017  bytes 856436296 (856.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3054071  bytes 707611690 (707.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4106308  bytes 802700875 (802.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5421142  bytes 856455354 (856.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5421142  bytes 856455354 (856.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3054126  bytes 707625025 (707.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4106387  bytes 802715330 (802.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5421263  bytes 856473024 (856.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5421263  bytes 856473024 (856.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3054184  bytes 707638475 (707.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4106467  bytes 802729814 (802.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5421382  bytes 856490517 (856.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5421382  bytes 856490517 (856.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3054268  bytes 707657299 (707.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4106579  bytes 802749497 (802.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5421522  bytes 856510725 (856.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5421522  bytes 856510725 (856.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3054367  bytes 707679782 (707.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4106697  bytes 802770279 (802.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5421668  bytes 856530016 (856.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5421668  bytes 856530016 (856.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3054429  bytes 707694359 (707.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4106783  bytes 802785405 (802.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5421787  bytes 856548762 (856.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5421787  bytes 856548762 (856.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3054481  bytes 707707470 (707.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4106858  bytes 802799584 (802.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5421897  bytes 856565824 (856.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5421897  bytes 856565824 (856.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3054542  bytes 707721180 (707.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4106941  bytes 802815390 (802.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5422021  bytes 856583664 (856.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5422021  bytes 856583664 (856.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3054606  bytes 707735867 (707.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4107031  bytes 802830737 (802.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5422156  bytes 856603458 (856.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5422156  bytes 856603458 (856.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3054711  bytes 707758077 (707.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4107153  bytes 802854011 (802.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5422299  bytes 856622630 (856.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5422299  bytes 856622630 (856.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3054773  bytes 707772590 (707.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4107239  bytes 802869155 (802.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5422422  bytes 856641666 (856.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5422422  bytes 856641666 (856.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3054830  bytes 707785960 (707.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4107319  bytes 802883699 (802.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5422542  bytes 856659294 (856.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5422542  bytes 856659294 (856.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3054898  bytes 707803422 (707.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4107412  bytes 802899726 (802.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5422670  bytes 856677412 (856.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5422670  bytes 856677412 (856.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3054964  bytes 707818428 (707.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4107503  bytes 802915179 (802.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5422800  bytes 856696908 (856.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5422800  bytes 856696908 (856.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3055043  bytes 707836427 (707.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4107604  bytes 802934157 (802.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5422929  bytes 856715228 (856.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5422929  bytes 856715228 (856.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3055128  bytes 707855204 (707.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4107709  bytes 802953335 (802.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5423056  bytes 856734566 (856.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5423056  bytes 856734566 (856.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3055196  bytes 707869523 (707.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4107793  bytes 802968368 (802.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5423166  bytes 856751486 (856.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5423166  bytes 856751486 (856.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3055260  bytes 707883484 (707.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4107879  bytes 802983400 (802.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5423292  bytes 856769572 (856.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5423292  bytes 856769572 (856.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3055333  bytes 707898979 (707.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4107969  bytes 802998791 (802.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5423419  bytes 856788912 (856.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5423419  bytes 856788912 (856.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3055417  bytes 707920458 (707.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4108077  bytes 803018736 (803.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5423544  bytes 856807030 (856.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5423544  bytes 856807030 (856.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3055502  bytes 707939342 (707.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4108181  bytes 803038034 (803.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5423683  bytes 856826876 (856.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5423683  bytes 856826876 (856.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3055557  bytes 707952657 (707.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4108261  bytes 803052550 (803.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5423801  bytes 856844366 (856.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5423801  bytes 856844366 (856.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3055613  bytes 707965944 (707.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4108345  bytes 803067382 (803.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5423936  bytes 856862920 (856.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5423936  bytes 856862920 (856.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3055675  bytes 707980561 (707.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4108432  bytes 803082452 (803.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5424076  bytes 856882958 (856.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5424076  bytes 856882958 (856.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3055753  bytes 707998241 (707.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4108531  bytes 803101178 (803.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5424205  bytes 856901098 (856.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5424205  bytes 856901098 (856.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3055840  bytes 708017285 (708.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4108644  bytes 803121167 (803.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5424350  bytes 856921435 (856.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5424350  bytes 856921435 (856.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3055892  bytes 708030455 (708.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4108718  bytes 803135223 (803.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5424470  bytes 856939075 (856.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5424470  bytes 856939075 (856.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3055960  bytes 708048284 (708.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4108809  bytes 803151205 (803.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5424605  bytes 856957628 (856.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5424605  bytes 856957628 (856.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3056023  bytes 708062884 (708.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4108893  bytes 803166173 (803.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5424735  bytes 856977146 (856.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5424735  bytes 856977146 (856.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3056097  bytes 708080340 (708.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4108991  bytes 803184742 (803.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5424862  bytes 856995274 (856.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5424862  bytes 856995274 (856.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3056191  bytes 708099549 (708.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4109104  bytes 803204830 (803.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5424999  bytes 857015255 (857.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5424999  bytes 857015255 (857.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3056249  bytes 708112959 (708.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4109183  bytes 803219268 (803.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5425107  bytes 857032189 (857.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5425107  bytes 857032189 (857.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3056303  bytes 708126198 (708.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4109261  bytes 803233585 (803.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5425226  bytes 857049731 (857.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5425226  bytes 857049731 (857.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3056368  bytes 708141048 (708.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4109350  bytes 803248881 (803.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5425360  bytes 857069462 (857.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5425360  bytes 857069462 (857.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
b'Error on request'
Token e243aac39fb012c084cfefeb2a6a3641 is maybe invalid 
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3056449  bytes 708161976 (708.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4109459  bytes 803268952 (803.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5425492  bytes 857087920 (857.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5425492  bytes 857087920 (857.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3056541  bytes 708181622 (708.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4109572  bytes 803288893 (803.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5425637  bytes 857108269 (857.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5425637  bytes 857108269 (857.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3056597  bytes 708194941 (708.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4109649  bytes 803303256 (803.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5425749  bytes 857125435 (857.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5425749  bytes 857125435 (857.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3056652  bytes 708208188 (708.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4109722  bytes 803317263 (803.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5425865  bytes 857142785 (857.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5425865  bytes 857142785 (857.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3056717  bytes 708222878 (708.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4109812  bytes 803332589 (803.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5426011  bytes 857163152 (857.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5426011  bytes 857163152 (857.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3056801  bytes 708240877 (708.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4109914  bytes 803351393 (803.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5426142  bytes 857181538 (857.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5426142  bytes 857181538 (857.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3056889  bytes 708259865 (708.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4110028  bytes 803371408 (803.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5426285  bytes 857201747 (857.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5426285  bytes 857201747 (857.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3056945  bytes 708273394 (708.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4110108  bytes 803385848 (803.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5426405  bytes 857219305 (857.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5426405  bytes 857219305 (857.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3057020  bytes 708293275 (708.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4110202  bytes 803402063 (803.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5426529  bytes 857237293 (857.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5426529  bytes 857237293 (857.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3057087  bytes 708307970 (708.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4110288  bytes 803417042 (803.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5426664  bytes 857257052 (857.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5426664  bytes 857257052 (857.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3057169  bytes 708325886 (708.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4110393  bytes 803437193 (803.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5426795  bytes 857275412 (857.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5426795  bytes 857275412 (857.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3057258  bytes 708345207 (708.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4110504  bytes 803456991 (803.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5426942  bytes 857295891 (857.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5426942  bytes 857295891 (857.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3057315  bytes 708358657 (708.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4110580  bytes 803471235 (803.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5427054  bytes 857313033 (857.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5427054  bytes 857313033 (857.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3057375  bytes 708372228 (708.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4110661  bytes 803485790 (803.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5427173  bytes 857330599 (857.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5427173  bytes 857330599 (857.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3057444  bytes 708387303 (708.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4110756  bytes 803501499 (803.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5427318  bytes 857350936 (857.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5427318  bytes 857350936 (857.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3057507  bytes 708404433 (708.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4110844  bytes 803517232 (803.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5427443  bytes 857368900 (857.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5427443  bytes 857368900 (857.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3057617  bytes 708427854 (708.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4110981  bytes 803541676 (803.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5427598  bytes 857389923 (857.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5427598  bytes 857389923 (857.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3057679  bytes 708441545 (708.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4111061  bytes 803556674 (803.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5427714  bytes 857407273 (857.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5427714  bytes 857407273 (857.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3057733  bytes 708454983 (708.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4111137  bytes 803570931 (803.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5427833  bytes 857424803 (857.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5427833  bytes 857424803 (857.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3057799  bytes 708469677 (708.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4111229  bytes 803586305 (803.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5427978  bytes 857445117 (857.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5427978  bytes 857445117 (857.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3057873  bytes 708485117 (708.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4111320  bytes 803601891 (803.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5428098  bytes 857462675 (857.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5428098  bytes 857462675 (857.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3057960  bytes 708503988 (708.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4111430  bytes 803621554 (803.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5428236  bytes 857482703 (857.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5428236  bytes 857482703 (857.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3058042  bytes 708521932 (708.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4111526  bytes 803640012 (803.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5428356  bytes 857500473 (857.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5428356  bytes 857500473 (857.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3058108  bytes 708539615 (708.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4111613  bytes 803655588 (803.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5428474  bytes 857517851 (857.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5428474  bytes 857517851 (857.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3058180  bytes 708554801 (708.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4111713  bytes 803671663 (803.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5428630  bytes 857538938 (857.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5428630  bytes 857538938 (857.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3058231  bytes 708567884 (708.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4111787  bytes 803685773 (803.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5428745  bytes 857556236 (857.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5428745  bytes 857556236 (857.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
b'Error on request'
Token e243aac39fb012c084cfefeb2a6a3641 is maybe invalid 
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3058314  bytes 708586905 (708.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4111895  bytes 803705275 (803.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5428877  bytes 857575914 (857.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5428877  bytes 857575914 (857.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3058393  bytes 708604688 (708.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4111996  bytes 803724298 (803.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5429004  bytes 857593932 (857.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5429004  bytes 857593932 (857.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3058451  bytes 708618146 (708.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4112076  bytes 803739919 (803.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5429122  bytes 857611386 (857.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5429122  bytes 857611386 (857.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3058519  bytes 708633383 (708.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4112174  bytes 803755733 (803.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5429277  bytes 857632421 (857.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5429277  bytes 857632421 (857.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3058588  bytes 708651021 (708.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4112261  bytes 803771591 (803.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5429396  bytes 857649915 (857.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5429396  bytes 857649915 (857.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3058683  bytes 708671034 (708.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4112378  bytes 803791612 (803.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5429532  bytes 857669687 (857.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5429532  bytes 857669687 (857.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3058769  bytes 708689147 (708.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4112482  bytes 803810819 (803.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5429669  bytes 857688379 (857.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5429669  bytes 857688379 (857.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3058821  bytes 708702250 (708.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4112555  bytes 803824783 (803.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5429791  bytes 857706041 (857.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5429791  bytes 857706041 (857.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3058893  bytes 708717406 (708.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4112646  bytes 803840230 (803.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5429931  bytes 857726141 (857.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5429931  bytes 857726141 (857.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3058952  bytes 708731167 (708.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4112725  bytes 803854685 (803.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5430050  bytes 857743683 (857.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5430050  bytes 857743683 (857.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3059038  bytes 708750365 (708.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4112838  bytes 803875158 (803.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5430190  bytes 857763777 (857.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5430190  bytes 857763777 (857.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3059124  bytes 708768510 (708.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4112944  bytes 803894533 (803.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5430330  bytes 857782613 (857.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5430330  bytes 857782613 (857.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3059194  bytes 708786199 (708.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4113036  bytes 803910482 (803.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5430456  bytes 857800625 (857.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5430456  bytes 857800625 (857.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3059261  bytes 708800921 (708.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4113124  bytes 803925585 (803.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5430591  bytes 857820379 (857.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5430591  bytes 857820379 (857.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3059317  bytes 708814227 (708.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4113206  bytes 803940178 (803.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5430717  bytes 857838333 (857.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5430717  bytes 857838333 (857.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3059404  bytes 708833154 (708.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4113317  bytes 803959795 (803.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5430854  bytes 857858221 (857.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5430854  bytes 857858221 (857.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3059497  bytes 708852860 (708.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4113434  bytes 803979957 (803.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5430998  bytes 857877379 (857.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5430998  bytes 857877379 (857.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3059556  bytes 708866426 (708.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4113514  bytes 803994530 (803.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5431116  bytes 857894833 (857.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5431116  bytes 857894833 (857.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3059617  bytes 708880832 (708.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4113599  bytes 804009495 (804.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5431252  bytes 857914641 (857.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5431252  bytes 857914641 (857.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3059687  bytes 708898195 (708.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4113693  bytes 804025656 (804.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5431390  bytes 857933303 (857.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5431390  bytes 857933303 (857.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3059782  bytes 708917852 (708.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4113809  bytes 804045590 (804.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5431532  bytes 857953415 (857.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5431532  bytes 857953415 (857.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3059869  bytes 708936165 (708.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4113919  bytes 804065232 (804.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5431675  bytes 857972444 (857.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5431675  bytes 857972444 (857.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3059928  bytes 708949704 (708.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4113998  bytes 804079727 (804.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5431789  bytes 857989690 (857.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5431789  bytes 857989690 (857.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3059995  bytes 708964826 (708.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4114088  bytes 804095078 (804.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5431924  bytes 858009468 (858.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5431924  bytes 858009468 (858.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3060054  bytes 708978393 (708.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4114167  bytes 804109677 (804.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5432048  bytes 858027333 (858.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5432048  bytes 858027333 (858.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3060137  bytes 708997039 (708.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4114280  bytes 804129488 (804.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5432187  bytes 858047315 (858.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5432187  bytes 858047315 (858.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3060215  bytes 709014772 (709.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4114382  bytes 804148483 (804.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5432321  bytes 858065838 (858.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5432321  bytes 858065838 (858.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3060285  bytes 709032485 (709.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4114472  bytes 804164444 (804.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5432448  bytes 858083902 (858.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5432448  bytes 858083902 (858.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3060358  bytes 709047789 (709.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4114565  bytes 804181271 (804.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5432586  bytes 858103836 (858.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5432586  bytes 858103836 (858.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3060412  bytes 709061231 (709.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4114646  bytes 804195822 (804.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5432715  bytes 858121969 (858.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5432715  bytes 858121969 (858.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3060484  bytes 709076257 (709.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4114735  bytes 804211743 (804.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5432845  bytes 858141339 (858.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5432845  bytes 858141339 (858.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3060583  bytes 709097235 (709.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4114856  bytes 804235000 (804.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5432980  bytes 858160170 (858.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5432980  bytes 858160170 (858.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3060640  bytes 709111646 (709.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4114937  bytes 804249608 (804.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5433097  bytes 858177596 (858.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5433097  bytes 858177596 (858.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3060704  bytes 709126299 (709.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4115025  bytes 804264726 (804.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5433230  bytes 858197212 (858.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5433230  bytes 858197212 (858.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3060775  bytes 709143992 (709.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4115118  bytes 804280785 (804.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5433372  bytes 858216022 (858.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5433372  bytes 858216022 (858.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3060843  bytes 709158758 (709.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4115202  bytes 804295632 (804.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5433505  bytes 858235520 (858.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5433505  bytes 858235520 (858.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3060918  bytes 709176282 (709.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4115305  bytes 804314668 (804.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5433638  bytes 858253947 (858.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5433638  bytes 858253947 (858.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3060997  bytes 709194035 (709.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4115400  bytes 804333025 (804.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5433771  bytes 858272381 (858.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5433771  bytes 858272381 (858.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3061063  bytes 709208754 (709.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4115481  bytes 804347699 (804.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5433892  bytes 858291219 (858.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5433892  bytes 858291219 (858.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3061120  bytes 709222089 (709.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4115562  bytes 804362195 (804.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5434025  bytes 858309682 (858.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5434025  bytes 858309682 (858.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3061185  bytes 709236711 (709.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4115651  bytes 804377416 (804.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5434152  bytes 858328868 (858.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5434152  bytes 858328868 (858.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3061261  bytes 709254294 (709.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4115745  bytes 804395749 (804.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5434271  bytes 858346452 (858.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5434271  bytes 858346452 (858.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3061357  bytes 709276586 (709.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4115863  bytes 804416652 (804.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5434416  bytes 858365690 (858.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5434416  bytes 858365690 (858.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3061424  bytes 709291496 (709.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4115954  bytes 804432053 (804.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5434555  bytes 858385676 (858.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5434555  bytes 858385676 (858.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3061476  bytes 709304643 (709.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4116035  bytes 804446633 (804.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5434698  bytes 858404668 (858.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5434698  bytes 858404668 (858.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3061543  bytes 709319352 (709.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4116125  bytes 804461969 (804.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5434822  bytes 858423626 (858.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5434822  bytes 858423626 (858.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3061629  bytes 709337404 (709.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4116232  bytes 804481197 (804.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5434954  bytes 858441978 (858.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5434954  bytes 858441978 (858.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3061713  bytes 709355506 (709.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4116339  bytes 804500839 (804.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5435094  bytes 858460852 (858.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5435094  bytes 858460852 (858.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3061788  bytes 709370768 (709.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4116430  bytes 804516212 (804.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5435228  bytes 858480602 (858.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5435228  bytes 858480602 (858.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3061851  bytes 709387959 (709.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4116520  bytes 804532145 (804.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5435359  bytes 858498876 (858.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5435359  bytes 858498876 (858.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3061930  bytes 709403894 (709.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4116616  bytes 804549058 (804.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5435492  bytes 858518374 (858.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5435492  bytes 858518374 (858.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3062002  bytes 709421254 (709.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4116718  bytes 804567939 (804.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5435626  bytes 858536866 (858.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5435626  bytes 858536866 (858.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3062083  bytes 709439131 (709.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4116822  bytes 804587057 (804.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5435755  bytes 858555107 (858.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5435755  bytes 858555107 (858.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3062156  bytes 709454525 (709.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4116915  bytes 804602606 (804.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5435886  bytes 858574643 (858.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5435886  bytes 858574643 (858.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3062212  bytes 709467936 (709.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4116991  bytes 804616771 (804.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5436011  bytes 858592497 (858.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5436011  bytes 858592497 (858.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3062272  bytes 709482226 (709.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4117076  bytes 804631732 (804.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5436136  bytes 858611594 (858.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5436136  bytes 858611594 (858.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3062355  bytes 709500125 (709.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4117185  bytes 804651659 (804.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5436262  bytes 858629720 (858.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5436262  bytes 858629720 (858.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3062451  bytes 709522635 (709.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4117303  bytes 804672458 (804.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5436409  bytes 858649038 (858.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5436409  bytes 858649038 (858.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3062520  bytes 709537657 (709.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4117392  bytes 804687731 (804.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5436536  bytes 858668366 (858.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5436536  bytes 858668366 (858.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3062572  bytes 709550748 (709.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4117467  bytes 804701915 (804.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5436648  bytes 858685508 (858.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5436648  bytes 858685508 (858.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3062634  bytes 709565177 (709.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4117556  bytes 804717143 (804.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5436780  bytes 858705050 (858.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5436780  bytes 858705050 (858.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3062705  bytes 709582496 (709.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4117658  bytes 804735924 (804.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5436913  bytes 858723524 (858.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5436913  bytes 858723524 (858.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3062785  bytes 709600473 (709.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4117768  bytes 804755868 (804.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5437050  bytes 858742241 (858.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5437050  bytes 858742241 (858.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3062855  bytes 709615759 (709.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4117859  bytes 804771269 (804.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5437186  bytes 858762131 (858.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5437186  bytes 858762131 (858.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3062920  bytes 709633172 (709.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4117946  bytes 804786924 (804.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5437303  bytes 858779639 (858.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5437303  bytes 858779639 (858.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3062980  bytes 709647505 (709.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4118031  bytes 804801908 (804.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5437435  bytes 858799100 (858.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5437435  bytes 858799100 (858.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3063056  bytes 709665109 (709.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4118135  bytes 804820876 (804.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5437561  bytes 858817200 (858.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5437561  bytes 858817200 (858.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3063136  bytes 709683002 (709.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4118235  bytes 804839681 (804.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5437702  bytes 858836057 (858.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5437702  bytes 858836057 (858.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3063203  bytes 709697878 (709.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4118322  bytes 804854846 (804.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5437831  bytes 858855523 (858.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5437831  bytes 858855523 (858.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3063257  bytes 709711348 (709.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4118400  bytes 804869246 (804.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5437946  bytes 858872881 (858.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5437946  bytes 858872881 (858.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3063318  bytes 709725662 (709.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4118487  bytes 804884321 (804.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5438076  bytes 858892238 (858.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5438076  bytes 858892238 (858.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3063375  bytes 709739089 (709.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4118567  bytes 804898814 (804.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5438198  bytes 858909940 (858.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5438198  bytes 858909940 (858.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3063484  bytes 709764105 (709.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4118701  bytes 804923475 (804.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5438345  bytes 858929475 (858.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5438345  bytes 858929475 (858.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3063552  bytes 709779891 (709.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4118791  bytes 804938806 (804.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5438468  bytes 858948535 (858.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5438468  bytes 858948535 (858.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3063604  bytes 709793038 (709.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4118869  bytes 804953227 (804.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5438585  bytes 858965961 (858.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5438585  bytes 858965961 (858.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3063668  bytes 709807556 (709.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4118957  bytes 804968457 (804.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5438718  bytes 858985510 (858.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5438718  bytes 858985510 (858.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3063721  bytes 709820719 (709.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4119030  bytes 804983540 (804.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5438833  bytes 859002808 (859.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5438833  bytes 859002808 (859.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
b'Error on request'
Token e243aac39fb012c084cfefeb2a6a3641 is maybe invalid 
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3063808  bytes 709839004 (709.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4119135  bytes 805002793 (805.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5438977  bytes 859021955 (859.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5438977  bytes 859021955 (859.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3063894  bytes 709857882 (709.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4119236  bytes 805021696 (805.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5439113  bytes 859041939 (859.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5439113  bytes 859041939 (859.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3063961  bytes 709875335 (709.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4119324  bytes 805037408 (805.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5439225  bytes 859059033 (859.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5439225  bytes 859059033 (859.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3064026  bytes 709890352 (709.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4119418  bytes 805054136 (805.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5439364  bytes 859079035 (859.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5439364  bytes 859079035 (859.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3064091  bytes 709905979 (709.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4119501  bytes 805068890 (805.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5439482  bytes 859096525 (859.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5439482  bytes 859096525 (859.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3064161  bytes 709923255 (709.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4119597  bytes 805087278 (805.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5439604  bytes 859114203 (859.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5439604  bytes 859114203 (859.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3064267  bytes 709944392 (709.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4119726  bytes 805108475 (805.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5439754  bytes 859134999 (859.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5439754  bytes 859134999 (859.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3064323  bytes 709957803 (709.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4119804  bytes 805122859 (805.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5439868  bytes 859152281 (859.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5439868  bytes 859152281 (859.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3064385  bytes 709972205 (709.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4119894  bytes 805138877 (805.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5440006  bytes 859172232 (859.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5440006  bytes 859172232 (859.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3064434  bytes 709985064 (709.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4119964  bytes 805152626 (805.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5440114  bytes 859188976 (859.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5440114  bytes 859188976 (859.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3064528  bytes 710007383 (710.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4120081  bytes 805173312 (805.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5440249  bytes 859207688 (859.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5440249  bytes 859207688 (859.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3064619  bytes 710026833 (710.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4120195  bytes 805193349 (805.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5440402  bytes 859228641 (859.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5440402  bytes 859228641 (859.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3064673  bytes 710040131 (710.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4120272  bytes 805207663 (805.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5440517  bytes 859245939 (859.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5440517  bytes 859245939 (859.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3064739  bytes 710055045 (710.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4120359  bytes 805223224 (805.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5440651  bytes 859265563 (859.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5440651  bytes 859265563 (859.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3064798  bytes 710068820 (710.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4120440  bytes 805237927 (805.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5440767  bytes 859282913 (859.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5440767  bytes 859282913 (859.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3064879  bytes 710086643 (710.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4120550  bytes 805257466 (805.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5440888  bytes 859300739 (859.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5440888  bytes 859300739 (859.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3064972  bytes 710106043 (710.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4120666  bytes 805277593 (805.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5441040  bytes 859321725 (859.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5441040  bytes 859321725 (859.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3065050  bytes 710124361 (710.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4120758  bytes 805293806 (805.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5441160  bytes 859339389 (859.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5441160  bytes 859339389 (859.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3065120  bytes 710139342 (710.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4120849  bytes 805311527 (805.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5441290  bytes 859358707 (859.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5441290  bytes 859358707 (859.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3065177  bytes 710152920 (710.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4120929  bytes 805326103 (805.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5441414  bytes 859376572 (859.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5441414  bytes 859376572 (859.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3065253  bytes 710170612 (710.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4121031  bytes 805344984 (805.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5441537  bytes 859394456 (859.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5441537  bytes 859394456 (859.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3065345  bytes 710190407 (710.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4121150  bytes 805365422 (805.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5441685  bytes 859415066 (859.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5441685  bytes 859415066 (859.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3065402  bytes 710203890 (710.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4121232  bytes 805380075 (805.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5441805  bytes 859432684 (859.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5441805  bytes 859432684 (859.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3065464  bytes 710218248 (710.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4121318  bytes 805395101 (805.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5441926  bytes 859451534 (859.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5441926  bytes 859451534 (859.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3065526  bytes 710232299 (710.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4121400  bytes 805410318 (805.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5442050  bytes 859469363 (859.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5442050  bytes 859469363 (859.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3065621  bytes 710255196 (710.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4121518  bytes 805432295 (805.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5442193  bytes 859488491 (859.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5442193  bytes 859488491 (859.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3065706  bytes 710274009 (710.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4121627  bytes 805451885 (805.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5442342  bytes 859509176 (859.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5442342  bytes 859509176 (859.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3065766  bytes 710287663 (710.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4121707  bytes 805466429 (805.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5442461  bytes 859526742 (859.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5442461  bytes 859526742 (859.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3065828  bytes 710302244 (710.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4121791  bytes 805481391 (805.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5442584  bytes 859545696 (859.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5442584  bytes 859545696 (859.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3065888  bytes 710315847 (710.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4121874  bytes 805496178 (805.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5442712  bytes 859563697 (859.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5442712  bytes 859563697 (859.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3065963  bytes 710333407 (710.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4121979  bytes 805515325 (805.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5442846  bytes 859582189 (859.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5442846  bytes 859582189 (859.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3066071  bytes 710353947 (710.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4122102  bytes 805536202 (805.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5443002  bytes 859603381 (859.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5443002  bytes 859603381 (859.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3066140  bytes 710371054 (710.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4122190  bytes 805551946 (805.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5443127  bytes 859621339 (859.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5443127  bytes 859621339 (859.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3066208  bytes 710386190 (710.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4122283  bytes 805567953 (805.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5443254  bytes 859640537 (859.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5443254  bytes 859640537 (859.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3066268  bytes 710399964 (710.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4122366  bytes 805583158 (805.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5443379  bytes 859658417 (859.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5443379  bytes 859658417 (859.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3066328  bytes 710413534 (710.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4122446  bytes 805597693 (805.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5443500  bytes 859676007 (859.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5443500  bytes 859676007 (859.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3066446  bytes 710436992 (710.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4122591  bytes 805622770 (805.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5443655  bytes 859697171 (859.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5443655  bytes 859697171 (859.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3066511  bytes 710451863 (710.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4122674  bytes 805637500 (805.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5443770  bytes 859714493 (859.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5443770  bytes 859714493 (859.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3066573  bytes 710466349 (710.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4122760  bytes 805652546 (805.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5443895  bytes 859733499 (859.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5443895  bytes 859733499 (859.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3066626  bytes 710479524 (710.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4122841  bytes 805667153 (805.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5444023  bytes 859751547 (859.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5444023  bytes 859751547 (859.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3066697  bytes 710497350 (710.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4122932  bytes 805683188 (805.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5444141  bytes 859769131 (859.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5444141  bytes 859769131 (859.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3066784  bytes 710516332 (710.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4123047  bytes 805703391 (805.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5444294  bytes 859790058 (859.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5444294  bytes 859790058 (859.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3066876  bytes 710535201 (710.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4123146  bytes 805722293 (805.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5444424  bytes 859808218 (859.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5444424  bytes 859808218 (859.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3066941  bytes 710550271 (710.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4123234  bytes 805737555 (805.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5444554  bytes 859827536 (859.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5444554  bytes 859827536 (859.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3067003  bytes 710564021 (710.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4123316  bytes 805752343 (805.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5444687  bytes 859845999 (859.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5444687  bytes 859845999 (859.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3067058  bytes 710577368 (710.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4123393  bytes 805766654 (805.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5444802  bytes 859863321 (859.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5444802  bytes 859863321 (859.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3067140  bytes 710596144 (710.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4123503  bytes 805786173 (805.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5444940  bytes 859883271 (859.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5444940  bytes 859883271 (859.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3067242  bytes 710618877 (710.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4123622  bytes 805807135 (805.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5445089  bytes 859902826 (859.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5445089  bytes 859902826 (859.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3067305  bytes 710633689 (710.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4123709  bytes 805822211 (805.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5445207  bytes 859921520 (859.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5445207  bytes 859921520 (859.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3067367  bytes 710647643 (710.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4123791  bytes 805836991 (805.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5445334  bytes 859939480 (859.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5445334  bytes 859939480 (859.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3067422  bytes 710661042 (710.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4123869  bytes 805851392 (805.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5445444  bytes 859956578 (859.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5445444  bytes 859956578 (859.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3067503  bytes 710679915 (710.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4123976  bytes 805870710 (805.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5445588  bytes 859976942 (859.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5445588  bytes 859976942 (859.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3067584  bytes 710697887 (710.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4124079  bytes 805889809 (805.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5445719  bytes 859995287 (859.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5445719  bytes 859995287 (859.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3067651  bytes 710712693 (710.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4124168  bytes 805905275 (805.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5445850  bytes 860014717 (860.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5445850  bytes 860014717 (860.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3067713  bytes 710726372 (710.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4124247  bytes 805919742 (805.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5445968  bytes 860032171 (860.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5445968  bytes 860032171 (860.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3067781  bytes 710743946 (710.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4124340  bytes 805935837 (805.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5446104  bytes 860050730 (860.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5446104  bytes 860050730 (860.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3067868  bytes 710763013 (710.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4124451  bytes 805955509 (805.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5446244  bytes 860070978 (860.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5446244  bytes 860070978 (860.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3067952  bytes 710781055 (710.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4124553  bytes 805974508 (805.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5446379  bytes 860089530 (860.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5446379  bytes 860089530 (860.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3068017  bytes 710795685 (710.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4124640  bytes 805989676 (805.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5446504  bytes 860108648 (860.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5446504  bytes 860108648 (860.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3068073  bytes 710809040 (710.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4124717  bytes 806003959 (806.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5446614  bytes 860125686 (860.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5446614  bytes 860125686 (860.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3068129  bytes 710822434 (710.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4124797  bytes 806018479 (806.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5446743  bytes 860143750 (860.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5446743  bytes 860143750 (860.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3068223  bytes 710842150 (710.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4124919  bytes 806041170 (806.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5446892  bytes 860164428 (860.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5446892  bytes 860164428 (860.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3068313  bytes 710863742 (710.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4125031  bytes 806061566 (806.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5447026  bytes 860183143 (860.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5447026  bytes 860183143 (860.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3068380  bytes 710878786 (710.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4125118  bytes 806076565 (806.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5447156  bytes 860202485 (860.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5447156  bytes 860202485 (860.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3068435  bytes 710892340 (710.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4125195  bytes 806090910 (806.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5447268  bytes 860219627 (860.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5447268  bytes 860219627 (860.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3068491  bytes 710905615 (710.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4125274  bytes 806105340 (806.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5447389  bytes 860237276 (860.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5447389  bytes 860237276 (860.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3068581  bytes 710924963 (710.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4125385  bytes 806125984 (806.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5447534  bytes 860257768 (860.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5447534  bytes 860257768 (860.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3068660  bytes 710942658 (710.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4125484  bytes 806144789 (806.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5447669  bytes 860276356 (860.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5447669  bytes 860276356 (860.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3068727  bytes 710957687 (710.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4125571  bytes 806159940 (806.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5447791  bytes 860295258 (860.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5447791  bytes 860295258 (860.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3068793  bytes 710971834 (710.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4125651  bytes 806175589 (806.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5447906  bytes 860312544 (860.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5447906  bytes 860312544 (860.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3068869  bytes 710990723 (710.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4125749  bytes 806193322 (806.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5448036  bytes 860330767 (860.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5448036  bytes 860330767 (860.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3068964  bytes 711010207 (711.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4125863  bytes 806213197 (806.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5448185  bytes 860351529 (860.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5448185  bytes 860351529 (860.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3069044  bytes 711028103 (711.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4125965  bytes 806232286 (806.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5448324  bytes 860370289 (860.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5448324  bytes 860370289 (860.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3069106  bytes 711042789 (711.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4126049  bytes 806247216 (806.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5448452  bytes 860389539 (860.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5448452  bytes 860389539 (860.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3069162  bytes 711056331 (711.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4126124  bytes 806261363 (806.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5448571  bytes 860407069 (860.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5448571  bytes 860407069 (860.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3069218  bytes 711069964 (711.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4126204  bytes 806275892 (806.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5448693  bytes 860424769 (860.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5448693  bytes 860424769 (860.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3069282  bytes 711084642 (711.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4126294  bytes 806291234 (806.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5448822  bytes 860444229 (860.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5448822  bytes 860444229 (860.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3069389  bytes 711109606 (711.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4126429  bytes 806316125 (806.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5448975  bytes 860464028 (860.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5448975  bytes 860464028 (860.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3069458  bytes 711125451 (711.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4126518  bytes 806331316 (806.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5449106  bytes 860483480 (860.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5449106  bytes 860483480 (860.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3069514  bytes 711138993 (711.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4126591  bytes 806345351 (806.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5449212  bytes 860500180 (860.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5449212  bytes 860500180 (860.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3069573  bytes 711152893 (711.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4126677  bytes 806360315 (806.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5449346  bytes 860518659 (860.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5449346  bytes 860518659 (860.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3069640  bytes 711167643 (711.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4126769  bytes 806375809 (806.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5449472  bytes 860537947 (860.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5449472  bytes 860537947 (860.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3069712  bytes 711184972 (711.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4126866  bytes 806394481 (806.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5449609  bytes 860556621 (860.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5449609  bytes 860556621 (860.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3069800  bytes 711203926 (711.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4126969  bytes 806413516 (806.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5449740  bytes 860576049 (860.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5449740  bytes 860576049 (860.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3069861  bytes 711217980 (711.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4127049  bytes 806428152 (806.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5449859  bytes 860593579 (860.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5449859  bytes 860593579 (860.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3069937  bytes 711236577 (711.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4127150  bytes 806444851 (806.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5449987  bytes 860611851 (860.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5449987  bytes 860611851 (860.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3069998  bytes 711251064 (711.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4127234  bytes 806459687 (806.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5450125  bytes 860631821 (860.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5450125  bytes 860631821 (860.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3070076  bytes 711268795 (711.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4127337  bytes 806478733 (806.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5450252  bytes 860649845 (860.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5450252  bytes 860649845 (860.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3070180  bytes 711289234 (711.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4127459  bytes 806499682 (806.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5450400  bytes 860670314 (860.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5450400  bytes 860670314 (860.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3070239  bytes 711302717 (711.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4127538  bytes 806514069 (806.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5450519  bytes 860687880 (860.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5450519  bytes 860687880 (860.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3070308  bytes 711317004 (711.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4127625  bytes 806529596 (806.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5450645  bytes 860705789 (860.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5450645  bytes 860705789 (860.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3070373  bytes 711333606 (711.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4127719  bytes 806545163 (806.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5450782  bytes 860725671 (860.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5450782  bytes 860725671 (860.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3070466  bytes 711355833 (711.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4127830  bytes 806566345 (806.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5450925  bytes 860744761 (860.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5450925  bytes 860744761 (860.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3070561  bytes 711375657 (711.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4127948  bytes 806586713 (806.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5451072  bytes 860765286 (860.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5451072  bytes 860765286 (860.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3070624  bytes 711389893 (711.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4128030  bytes 806601886 (806.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5451192  bytes 860782844 (860.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5451192  bytes 860782844 (860.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3070686  bytes 711405264 (711.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4128112  bytes 806616470 (806.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5451312  bytes 860800462 (860.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5451312  bytes 860800462 (860.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3070756  bytes 711420254 (711.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4128201  bytes 806632801 (806.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5451451  bytes 860820429 (860.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5451451  bytes 860820429 (860.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3070824  bytes 711437203 (711.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4128295  bytes 806651078 (806.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5451567  bytes 860837949 (860.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5451567  bytes 860837949 (860.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3070923  bytes 711457373 (711.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4128417  bytes 806671683 (806.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5451715  bytes 860858478 (860.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5451715  bytes 860858478 (860.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3070979  bytes 711471016 (711.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4128496  bytes 806686186 (806.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5451832  bytes 860875880 (860.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5451832  bytes 860875880 (860.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3071047  bytes 711488786 (711.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4128589  bytes 806702228 (806.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5451950  bytes 860893464 (860.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5451950  bytes 860893464 (860.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3071120  bytes 711503965 (711.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4128686  bytes 806719161 (806.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5452091  bytes 860913570 (860.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5452091  bytes 860913570 (860.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3071202  bytes 711522168 (711.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4128790  bytes 806738157 (806.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5452225  bytes 860932088 (860.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5452225  bytes 860932088 (860.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3071296  bytes 711543503 (711.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4128905  bytes 806758328 (806.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5452369  bytes 860952373 (860.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5452369  bytes 860952373 (860.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3071359  bytes 711557643 (711.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4128984  bytes 806772818 (806.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5452481  bytes 860969551 (860.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5452481  bytes 860969551 (860.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3071429  bytes 711572570 (711.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4129076  bytes 806789551 (806.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5452603  bytes 860987237 (860.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5452603  bytes 860987237 (860.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
b'Error on request'
Token e243aac39fb012c084cfefeb2a6a3641 is maybe invalid 
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3071496  bytes 711589116 (711.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4129169  bytes 806805128 (806.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5452743  bytes 861007313 (861.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5452743  bytes 861007313 (861.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3071542  bytes 711602943 (711.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4129235  bytes 806815886 (806.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5452778  bytes 861009765 (861.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5452778  bytes 861009765 (861.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3071591  bytes 711613515 (711.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4129298  bytes 806825781 (806.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5452822  bytes 861013914 (861.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5452822  bytes 861013914 (861.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3071610  bytes 711618296 (711.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4129328  bytes 806830305 (806.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5452840  bytes 861015216 (861.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5452840  bytes 861015216 (861.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3071630  bytes 711623235 (711.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4129358  bytes 806834814 (806.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5452860  bytes 861016636 (861.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5452860  bytes 861016636 (861.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3071659  bytes 711629381 (711.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4129400  bytes 806840253 (806.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5452899  bytes 861020405 (861.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5452899  bytes 861020405 (861.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3071697  bytes 711638200 (711.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4129458  bytes 806849725 (806.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5452930  bytes 861022567 (861.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5452930  bytes 861022567 (861.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3071763  bytes 711652318 (711.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4129544  bytes 806864610 (806.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5453016  bytes 861033989 (861.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5453016  bytes 861033989 (861.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3071822  bytes 711667565 (711.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4129623  bytes 806879117 (806.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5453133  bytes 861051391 (861.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5453133  bytes 861051391 (861.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3071892  bytes 711685396 (711.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4129714  bytes 806895008 (806.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5453254  bytes 861069167 (861.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5453254  bytes 861069167 (861.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3071961  bytes 711700314 (711.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4129801  bytes 806910096 (806.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5453390  bytes 861088926 (861.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5453390  bytes 861088926 (861.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3072018  bytes 711713864 (711.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4129881  bytes 806924710 (806.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5453514  bytes 861106732 (861.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5453514  bytes 861106732 (861.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3072136  bytes 711737648 (711.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4130014  bytes 806948874 (806.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5453661  bytes 861127365 (861.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5453661  bytes 861127365 (861.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3072199  bytes 711752831 (711.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4130092  bytes 806964815 (806.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5453780  bytes 861144871 (861.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5453780  bytes 861144871 (861.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3072254  bytes 711766322 (711.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4130168  bytes 806979116 (806.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5453890  bytes 861161815 (861.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5453890  bytes 861161815 (861.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3072331  bytes 711782200 (711.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4130268  bytes 806995386 (806.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5454036  bytes 861182356 (861.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5454036  bytes 861182356 (861.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3072405  bytes 711799986 (711.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4130355  bytes 807011017 (807.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5454156  bytes 861200020 (861.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5454156  bytes 861200020 (861.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3072506  bytes 711821365 (711.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4130477  bytes 807032945 (807.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5454319  bytes 861221560 (861.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5454319  bytes 861221560 (861.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3072585  bytes 711838787 (711.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4130572  bytes 807051338 (807.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5454427  bytes 861238386 (861.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5454427  bytes 861238386 (861.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3072641  bytes 711852376 (711.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4130652  bytes 807065852 (807.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5454547  bytes 861256004 (861.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5454547  bytes 861256004 (861.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3072714  bytes 711867811 (711.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4130751  bytes 807082905 (807.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5454700  bytes 861276909 (861.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5454700  bytes 861276909 (861.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3072773  bytes 711882990 (711.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4130826  bytes 807097079 (807.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5454810  bytes 861293793 (861.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5454810  bytes 861293793 (861.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3072857  bytes 711901840 (711.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4130938  bytes 807116948 (807.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5454960  bytes 861314482 (861.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5454960  bytes 861314482 (861.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3072938  bytes 711919865 (711.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4131036  bytes 807135678 (807.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5455078  bytes 861332112 (861.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5455078  bytes 861332112 (861.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3073011  bytes 711938358 (711.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4131130  bytes 807152495 (807.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5455199  bytes 861349828 (861.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5455199  bytes 861349828 (861.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3073079  bytes 711953305 (711.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4131222  bytes 807168014 (807.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5455345  bytes 861370277 (861.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5455345  bytes 861370277 (861.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3073141  bytes 711967032 (711.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4131305  bytes 807183906 (807.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5455464  bytes 861387783 (861.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5455464  bytes 861387783 (861.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3073232  bytes 711986289 (711.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4131417  bytes 807203686 (807.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5455602  bytes 861407711 (861.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5455602  bytes 861407711 (861.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3073314  bytes 712004202 (712.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4131519  bytes 807222700 (807.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5455733  bytes 861426092 (861.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5455733  bytes 861426092 (861.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3073371  bytes 712017453 (712.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4131595  bytes 807236969 (807.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5455847  bytes 861443302 (861.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5455847  bytes 861443302 (861.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3073440  bytes 712032416 (712.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4131684  bytes 807252246 (807.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5455981  bytes 861463030 (861.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5455981  bytes 861463030 (861.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3073506  bytes 712049750 (712.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4131776  bytes 807268708 (807.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5456108  bytes 861481097 (861.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5456108  bytes 861481097 (861.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3073587  bytes 712068230 (712.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4131881  bytes 807287809 (807.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5456237  bytes 861500505 (861.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5456237  bytes 861500505 (861.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3073671  bytes 712086280 (712.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4131983  bytes 807307004 (807.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5456375  bytes 861519312 (861.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5456375  bytes 861519312 (861.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3073728  bytes 712099773 (712.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4132061  bytes 807321407 (807.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5456489  bytes 861536604 (861.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5456489  bytes 861536604 (861.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3073795  bytes 712114555 (712.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4132151  bytes 807336785 (807.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5456616  bytes 861555932 (861.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5456616  bytes 861555932 (861.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3073846  bytes 712127510 (712.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4132227  bytes 807350994 (807.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5456735  bytes 861573476 (861.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5456735  bytes 861573476 (861.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3073928  bytes 712146320 (712.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4132340  bytes 807370953 (807.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5456876  bytes 861593622 (861.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5456876  bytes 861593622 (861.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3074009  bytes 712164277 (712.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4132443  bytes 807390141 (807.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5457013  bytes 861612315 (861.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5457013  bytes 861612315 (861.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3074071  bytes 712181447 (712.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4132529  bytes 807405658 (807.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5457129  bytes 861629771 (861.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5457129  bytes 861629771 (861.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3074147  bytes 712196765 (712.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4132625  bytes 807421380 (807.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5457267  bytes 861649765 (861.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5457267  bytes 861649765 (861.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3074203  bytes 712210052 (712.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4132706  bytes 807435963 (807.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5457393  bytes 861667674 (861.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5457393  bytes 861667674 (861.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3074293  bytes 712229399 (712.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4132817  bytes 807455998 (807.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5457531  bytes 861687542 (861.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5457531  bytes 861687542 (861.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3074381  bytes 712247891 (712.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4132925  bytes 807475683 (807.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5457672  bytes 861706466 (861.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5457672  bytes 861706466 (861.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
b'Error on request'
Token e243aac39fb012c084cfefeb2a6a3641 is maybe invalid 
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3074439  bytes 712261433 (712.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4132999  bytes 807489756 (807.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5457784  bytes 861723712 (861.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5457784  bytes 861723712 (861.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3074506  bytes 712276593 (712.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4133089  bytes 807505156 (807.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5457916  bytes 861743358 (861.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5457916  bytes 861743358 (861.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3074572  bytes 712294106 (712.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4133180  bytes 807521011 (807.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5458046  bytes 861761564 (861.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5458046  bytes 861761564 (861.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3074658  bytes 712313373 (712.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4133292  bytes 807541199 (807.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5458187  bytes 861781624 (861.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5458187  bytes 861781624 (861.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3074738  bytes 712331431 (712.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4133394  bytes 807560289 (807.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5458333  bytes 861800870 (861.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5458333  bytes 861800870 (861.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3074795  bytes 712344806 (712.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4133471  bytes 807574575 (807.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5458458  bytes 861818734 (861.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5458458  bytes 861818734 (861.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3074862  bytes 712359829 (712.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4133560  bytes 807589780 (807.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5458591  bytes 861838396 (861.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5458591  bytes 861838396 (861.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3074921  bytes 712373531 (712.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4133644  bytes 807604607 (807.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5458722  bytes 861856624 (861.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5458722  bytes 861856624 (861.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3074983  bytes 712387977 (712.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4133731  bytes 807619759 (807.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5458847  bytes 861875698 (861.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5458847  bytes 861875698 (861.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3075087  bytes 712410274 (712.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4133857  bytes 807643356 (807.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5458986  bytes 861894735 (861.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5458986  bytes 861894735 (861.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3075151  bytes 712427560 (712.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4133940  bytes 807658671 (807.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5459106  bytes 861912399 (861.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5459106  bytes 861912399 (861.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3075213  bytes 712442107 (712.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4134025  bytes 807673668 (807.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5459235  bytes 861931653 (861.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5459235  bytes 861931653 (861.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3075266  bytes 712455382 (712.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4134108  bytes 807688383 (807.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5459375  bytes 861950504 (861.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5459375  bytes 861950504 (861.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3075331  bytes 712470052 (712.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4134191  bytes 807703191 (807.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5459495  bytes 861969266 (861.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5459495  bytes 861969266 (861.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3075439  bytes 712491552 (712.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4134314  bytes 807726637 (807.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5459644  bytes 861988587 (861.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5459644  bytes 861988587 (861.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
b'Error on request'
Token e243aac39fb012c084cfefeb2a6a3641 is maybe invalid 
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3075503  bytes 712506218 (712.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4134396  bytes 807741262 (807.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5459764  bytes 862006145 (862.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5459764  bytes 862006145 (862.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3075571  bytes 712521340 (712.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4134487  bytes 807756723 (807.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5459898  bytes 862025835 (862.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5459898  bytes 862025835 (862.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3075645  bytes 712539086 (712.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4134581  bytes 807772708 (807.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5460043  bytes 862045051 (862.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5460043  bytes 862045051 (862.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3075706  bytes 712553408 (712.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4134662  bytes 807787404 (807.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5460170  bytes 862064059 (862.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5460170  bytes 862064059 (862.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3075787  bytes 712571252 (712.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4134765  bytes 807806578 (807.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5460308  bytes 862082786 (862.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5460308  bytes 862082786 (862.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3075871  bytes 712589312 (712.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4134863  bytes 807825215 (807.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5460445  bytes 862101502 (862.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5460445  bytes 862101502 (862.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3075941  bytes 712604329 (712.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4134952  bytes 807840482 (807.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5460573  bytes 862120962 (862.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5460573  bytes 862120962 (862.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3076001  bytes 712618012 (712.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4135034  bytes 807855099 (807.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5460706  bytes 862139294 (862.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5460706  bytes 862139294 (862.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3076070  bytes 712633170 (712.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4135128  bytes 807872677 (807.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5460837  bytes 862158664 (862.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5460837  bytes 862158664 (862.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3076154  bytes 712651520 (712.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4135232  bytes 807893284 (807.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5460966  bytes 862176922 (862.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5460966  bytes 862176922 (862.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3076254  bytes 712673992 (712.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4135350  bytes 807914174 (807.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5461112  bytes 862196213 (862.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5461112  bytes 862196213 (862.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3076330  bytes 712690387 (712.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4135445  bytes 807931779 (807.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5461239  bytes 862215517 (862.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5461239  bytes 862215517 (862.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3076389  bytes 712703997 (712.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4135522  bytes 807946042 (807.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5461360  bytes 862233151 (862.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5461360  bytes 862233151 (862.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3076451  bytes 712718363 (712.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4135609  bytes 807961202 (807.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5461494  bytes 862252751 (862.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5461494  bytes 862252751 (862.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3076535  bytes 712736710 (712.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4135717  bytes 807980720 (807.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5461622  bytes 862270895 (862.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5461622  bytes 862270895 (862.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3076620  bytes 712755951 (712.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4135825  bytes 808000362 (808.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5461765  bytes 862289924 (862.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5461765  bytes 862289924 (862.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3076686  bytes 712771068 (712.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4135913  bytes 808015592 (808.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5461898  bytes 862309540 (862.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5461898  bytes 862309540 (862.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3076741  bytes 712784462 (712.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4135995  bytes 808030539 (808.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5462029  bytes 862327800 (862.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5462029  bytes 862327800 (862.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3076816  bytes 712803516 (712.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4136091  bytes 808047085 (808.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5462172  bytes 862347868 (862.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5462172  bytes 862347868 (862.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3076905  bytes 712822111 (712.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4136202  bytes 808067867 (808.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5462304  bytes 862366220 (862.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5462304  bytes 862366220 (862.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3076985  bytes 712839979 (712.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4136307  bytes 808087196 (808.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5462444  bytes 862385154 (862.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5462444  bytes 862385154 (862.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3077051  bytes 712854833 (712.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4136394  bytes 808102327 (808.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5462583  bytes 862405186 (862.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5462583  bytes 862405186 (862.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3077110  bytes 712868615 (712.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4136473  bytes 808117920 (808.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5462702  bytes 862422762 (862.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5462702  bytes 862422762 (862.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3077171  bytes 712883200 (712.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4136558  bytes 808132876 (808.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5462835  bytes 862442311 (862.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5462835  bytes 862442311 (862.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3077244  bytes 712900520 (712.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4136655  bytes 808151331 (808.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5462970  bytes 862460881 (862.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5462970  bytes 862460881 (862.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3077338  bytes 712923783 (712.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4136770  bytes 808173238 (808.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5463115  bytes 862480119 (862.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5463115  bytes 862480119 (862.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3077409  bytes 712938791 (712.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4136862  bytes 808188678 (808.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5463251  bytes 862499949 (862.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5463251  bytes 862499949 (862.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3077469  bytes 712952620 (712.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4136942  bytes 808203337 (808.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5463368  bytes 862517375 (862.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5463368  bytes 862517375 (862.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3077534  bytes 712967054 (712.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4137028  bytes 808218307 (808.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5463501  bytes 862536888 (862.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5463501  bytes 862536888 (862.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3077607  bytes 712984723 (712.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4137129  bytes 808237361 (808.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5463626  bytes 862554876 (862.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5463626  bytes 862554876 (862.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3077688  bytes 713002598 (713.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4137228  bytes 808256235 (808.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5463760  bytes 862573400 (862.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5463760  bytes 862573400 (862.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3077752  bytes 713017200 (713.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4137317  bytes 808271431 (808.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5463892  bytes 862593000 (862.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5463892  bytes 862593000 (862.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3077818  bytes 713034570 (713.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4137405  bytes 808287112 (808.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5464018  bytes 862611000 (862.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5464018  bytes 862611000 (862.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3077880  bytes 713049263 (713.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4137493  bytes 808302321 (808.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5464152  bytes 862630564 (862.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5464152  bytes 862630564 (862.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3077936  bytes 713062654 (713.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4137569  bytes 808317634 (808.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5464277  bytes 862648398 (862.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5464277  bytes 862648398 (862.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3078041  bytes 713084975 (713.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4137699  bytes 808341593 (808.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5464424  bytes 862667815 (862.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5464424  bytes 862667815 (862.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3078105  bytes 713099654 (713.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4137780  bytes 808356314 (808.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5464549  bytes 862686897 (862.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5464549  bytes 862686897 (862.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3078161  bytes 713113182 (713.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4137858  bytes 808370669 (808.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5464665  bytes 862704257 (862.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5464665  bytes 862704257 (862.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3078222  bytes 713127610 (713.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4137947  bytes 808385900 (808.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5464806  bytes 862724410 (862.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5464806  bytes 862724410 (862.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3078283  bytes 713141409 (713.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4138029  bytes 808400725 (808.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5464926  bytes 862741968 (862.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5464926  bytes 862741968 (862.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3078391  bytes 713166391 (713.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4138160  bytes 808425143 (808.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5465079  bytes 862761628 (862.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5465079  bytes 862761628 (862.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3078459  bytes 713182215 (713.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4138250  bytes 808440619 (808.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5465212  bytes 862781302 (862.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5465212  bytes 862781302 (862.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3078510  bytes 713195572 (713.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4138327  bytes 808455009 (808.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5465335  bytes 862799016 (862.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5465335  bytes 862799016 (862.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3078575  bytes 713210130 (713.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4138413  bytes 808470071 (808.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5465481  bytes 862819383 (862.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5465481  bytes 862819383 (862.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3078630  bytes 713223528 (713.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4138490  bytes 808484441 (808.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5465585  bytes 862835991 (862.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5465585  bytes 862835991 (862.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3078698  bytes 713241136 (713.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4138586  bytes 808502826 (808.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5465713  bytes 862854159 (862.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5465713  bytes 862854159 (862.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3078788  bytes 713260424 (713.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4138697  bytes 808522683 (808.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5465862  bytes 862874858 (862.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5465862  bytes 862874858 (862.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3078848  bytes 713277923 (713.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4138782  bytes 808538138 (808.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5465987  bytes 862892886 (862.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5465987  bytes 862892886 (862.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3078917  bytes 713292733 (713.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4138874  bytes 808553715 (808.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5466131  bytes 862913660 (862.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5466131  bytes 862913660 (862.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3078976  bytes 713306359 (713.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4138956  bytes 808568528 (808.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5466248  bytes 862931098 (862.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5466248  bytes 862931098 (862.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3079054  bytes 713324269 (713.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4139057  bytes 808587290 (808.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5466376  bytes 862949242 (862.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5466376  bytes 862949242 (862.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3079150  bytes 713343997 (713.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4139176  bytes 808607630 (808.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5466527  bytes 862970130 (862.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5466527  bytes 862970130 (862.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3079211  bytes 713357687 (713.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4139255  bytes 808622067 (808.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5466644  bytes 862987532 (862.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5466644  bytes 862987532 (862.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3079280  bytes 713372813 (713.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4139345  bytes 808638890 (808.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5466772  bytes 863006770 (863.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5466772  bytes 863006770 (863.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3079337  bytes 713386503 (713.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4139427  bytes 808653521 (808.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5466907  bytes 863025229 (863.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5466907  bytes 863025229 (863.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3079426  bytes 713408836 (713.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4139541  bytes 808674154 (808.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5467049  bytes 863044269 (863.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5467049  bytes 863044269 (863.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3079518  bytes 713428477 (713.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4139658  bytes 808694477 (808.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5467203  bytes 863065274 (863.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5467203  bytes 863065274 (863.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3079572  bytes 713441711 (713.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4139733  bytes 808708675 (808.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5467317  bytes 863082520 (863.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5467317  bytes 863082520 (863.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3079632  bytes 713455993 (713.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4139816  bytes 808723630 (808.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5467436  bytes 863101290 (863.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5467436  bytes 863101290 (863.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3079688  bytes 713469344 (713.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4139896  bytes 808738163 (808.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5467557  bytes 863118975 (863.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5467557  bytes 863118975 (863.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3079766  bytes 713487159 (713.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4139998  bytes 808757055 (808.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5467689  bytes 863137327 (863.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5467689  bytes 863137327 (863.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3079861  bytes 713506845 (713.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4140114  bytes 808777276 (808.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5467849  bytes 863158644 (863.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5467849  bytes 863158644 (863.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
b'Error on request'
Token e243aac39fb012c084cfefeb2a6a3641 is maybe invalid 
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3079926  bytes 713523824 (713.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4140199  bytes 808792775 (808.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5467973  bytes 863176552 (863.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5467973  bytes 863176552 (863.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3079988  bytes 713538628 (713.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4140284  bytes 808807731 (808.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5468103  bytes 863195894 (863.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5468103  bytes 863195894 (863.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3080042  bytes 713551935 (713.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4140364  bytes 808822244 (808.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5468239  bytes 863214307 (863.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5468239  bytes 863214307 (863.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3080115  bytes 713569414 (713.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4140463  bytes 808840810 (808.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5468370  bytes 863232607 (863.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5468370  bytes 863232607 (863.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3080212  bytes 713589389 (713.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4140583  bytes 808861393 (808.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5468524  bytes 863253616 (863.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5468524  bytes 863253616 (863.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3080272  bytes 713602996 (713.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4140660  bytes 808875636 (808.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5468645  bytes 863271262 (863.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5468645  bytes 863271262 (863.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3080337  bytes 713617549 (713.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4140747  bytes 808890719 (808.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5468769  bytes 863290256 (863.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5468769  bytes 863290256 (863.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3080392  bytes 713630951 (713.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4140825  bytes 808905060 (808.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5468897  bytes 863308268 (863.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5468897  bytes 863308268 (863.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3080479  bytes 713652826 (713.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4140938  bytes 808925230 (808.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5469038  bytes 863327338 (863.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5469038  bytes 863327338 (863.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3080567  bytes 713671848 (713.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4141048  bytes 808944927 (808.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5469193  bytes 863348336 (863.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5469193  bytes 863348336 (863.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3080625  bytes 713685363 (713.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4141124  bytes 808959128 (808.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5469314  bytes 863365982 (863.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5469314  bytes 863365982 (863.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3080690  bytes 713700271 (713.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4141207  bytes 808973912 (808.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5469437  bytes 863384782 (863.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5469437  bytes 863384782 (863.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3080745  bytes 713713609 (713.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4141297  bytes 808989192 (808.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5469572  bytes 863403336 (863.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5469572  bytes 863403336 (863.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3080809  bytes 713727380 (713.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4141377  bytes 809004801 (809.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5469694  bytes 863421050 (863.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5469694  bytes 863421050 (863.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3080921  bytes 713751089 (713.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4141513  bytes 809029108 (809.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5469852  bytes 863442416 (863.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5469852  bytes 863442416 (863.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3080983  bytes 713768206 (713.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4141594  bytes 809044343 (809.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5469972  bytes 863459926 (863.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5469972  bytes 863459926 (863.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3081048  bytes 713783182 (713.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4141683  bytes 809059614 (809.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5470102  bytes 863479280 (863.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5470102  bytes 863479280 (863.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3081102  bytes 713796341 (713.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4141767  bytes 809074378 (809.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5470239  bytes 863497938 (863.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5470239  bytes 863497938 (863.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3081158  bytes 713809600 (713.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4141840  bytes 809088328 (809.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5470361  bytes 863515600 (863.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5470361  bytes 863515600 (863.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3081243  bytes 713828486 (713.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4141957  bytes 809108646 (809.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5470512  bytes 863536323 (863.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5470512  bytes 863536323 (863.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3081325  bytes 713846437 (713.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4142051  bytes 809126933 (809.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5470633  bytes 863554099 (863.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5470633  bytes 863554099 (863.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3081389  bytes 713861062 (713.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4142139  bytes 809142134 (809.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5470763  bytes 863573453 (863.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5470763  bytes 863573453 (863.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3081446  bytes 713874425 (713.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4142220  bytes 809156693 (809.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5470893  bytes 863591558 (863.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5470893  bytes 863591558 (863.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3081515  bytes 713892022 (713.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4142307  bytes 809172307 (809.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5471025  bytes 863609928 (863.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5471025  bytes 863609928 (863.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3081598  bytes 713910704 (713.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4142418  bytes 809192062 (809.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5471172  bytes 863630542 (863.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5471172  bytes 863630542 (863.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3081675  bytes 713928147 (713.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4142513  bytes 809210384 (809.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5471304  bytes 863648888 (863.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5471304  bytes 863648888 (863.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3081751  bytes 713943741 (713.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4142609  bytes 809226678 (809.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5471429  bytes 863667982 (863.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5471429  bytes 863667982 (863.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3081813  bytes 713957523 (713.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4142696  bytes 809242844 (809.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5471553  bytes 863685772 (863.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5471553  bytes 863685772 (863.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3081872  bytes 713971022 (713.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4142774  bytes 809257205 (809.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5471681  bytes 863703821 (863.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5471681  bytes 863703821 (863.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3081960  bytes 713990205 (713.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4142888  bytes 809277003 (809.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5471826  bytes 863724231 (863.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5471826  bytes 863724231 (863.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3082048  bytes 714011643 (714.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4142999  bytes 809297331 (809.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5471972  bytes 863743485 (863.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5471972  bytes 863743485 (863.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
b'Error on request'
Token e243aac39fb012c084cfefeb2a6a3641 is maybe invalid 
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3082112  bytes 714026474 (714.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4143085  bytes 809312249 (809.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5472100  bytes 863762699 (863.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5472100  bytes 863762699 (863.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3082169  bytes 714039857 (714.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4143163  bytes 809326602 (809.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5472221  bytes 863780333 (863.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5472221  bytes 863780333 (863.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3082226  bytes 714053192 (714.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4143242  bytes 809341013 (809.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5472351  bytes 863798486 (863.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5472351  bytes 863798486 (863.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3082306  bytes 714071720 (714.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4143353  bytes 809360554 (809.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5472499  bytes 863819052 (863.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5472499  bytes 863819052 (863.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3082391  bytes 714089991 (714.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4143459  bytes 809379954 (809.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5472643  bytes 863838157 (863.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5472643  bytes 863838157 (863.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3082459  bytes 714104797 (714.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4143544  bytes 809394942 (809.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5472769  bytes 863857303 (863.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5472769  bytes 863857303 (863.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3082516  bytes 714118219 (714.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4143621  bytes 809409208 (809.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5472890  bytes 863874937 (863.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5472890  bytes 863874937 (863.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3082587  bytes 714135795 (714.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4143713  bytes 809425127 (809.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5473023  bytes 863893407 (863.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5473023  bytes 863893407 (863.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3082673  bytes 714154903 (714.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4143827  bytes 809446110 (809.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5473175  bytes 863914301 (863.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5473175  bytes 863914301 (863.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3082760  bytes 714173022 (714.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4143930  bytes 809465900 (809.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5473315  bytes 863933137 (863.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5473315  bytes 863933137 (863.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3082825  bytes 714187492 (714.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4144012  bytes 809480630 (809.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5473439  bytes 863952143 (863.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5473439  bytes 863952143 (863.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3082882  bytes 714201022 (714.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4144086  bytes 809494707 (809.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5473556  bytes 863969545 (863.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5473556  bytes 863969545 (863.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3082940  bytes 714214456 (714.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4144168  bytes 809509338 (809.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5473681  bytes 863987426 (863.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5473681  bytes 863987426 (863.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3083031  bytes 714234157 (714.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4144281  bytes 809529146 (809.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5473827  bytes 864007924 (864.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5473827  bytes 864007924 (864.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3083131  bytes 714256568 (714.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4144394  bytes 809549619 (809.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5473972  bytes 864027127 (864.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5473972  bytes 864027127 (864.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3083199  bytes 714271656 (714.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4144482  bytes 809564740 (809.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5474098  bytes 864046273 (864.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5474098  bytes 864046273 (864.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3083254  bytes 714284923 (714.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4144556  bytes 809578780 (809.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5474217  bytes 864063779 (864.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5474217  bytes 864063779 (864.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3083310  bytes 714298298 (714.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4144637  bytes 809593354 (809.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5474351  bytes 864082127 (864.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5474351  bytes 864082127 (864.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3083402  bytes 714318246 (714.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4144748  bytes 809613431 (809.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5474501  bytes 864102833 (864.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5474501  bytes 864102833 (864.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3083483  bytes 714336299 (714.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4144849  bytes 809632497 (809.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5474643  bytes 864121836 (864.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5474643  bytes 864121836 (864.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3083548  bytes 714350992 (714.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4144931  bytes 809647306 (809.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5474768  bytes 864140930 (864.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5474768  bytes 864140930 (864.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3083599  bytes 714364150 (714.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4145001  bytes 809661174 (809.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5474875  bytes 864157658 (864.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5474875  bytes 864157658 (864.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3083665  bytes 714381785 (714.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4145097  bytes 809677371 (809.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5475021  bytes 864176890 (864.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5475021  bytes 864176890 (864.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3083731  bytes 714396543 (714.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4145184  bytes 809692495 (809.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5475159  bytes 864196922 (864.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5475159  bytes 864196922 (864.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3083829  bytes 714418516 (714.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4145307  bytes 809715746 (809.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5475307  bytes 864216391 (864.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5475307  bytes 864216391 (864.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3083893  bytes 714433436 (714.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4145390  bytes 809730678 (809.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5475428  bytes 864235123 (864.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5475428  bytes 864235123 (864.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3083945  bytes 714446451 (714.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4145464  bytes 809744795 (809.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5475545  bytes 864252489 (864.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5475545  bytes 864252489 (864.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3084004  bytes 714459946 (714.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4145548  bytes 809759584 (809.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5475681  bytes 864271096 (864.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5475681  bytes 864271096 (864.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3084071  bytes 714474953 (714.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4145637  bytes 809774909 (809.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5475808  bytes 864290340 (864.2 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5475808  bytes 864290340 (864.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3084150  bytes 714492808 (714.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4145742  bytes 809794299 (809.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5475957  bytes 864309745 (864.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5475957  bytes 864309745 (864.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3084254  bytes 714516167 (714.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4145868  bytes 809815802 (809.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5476089  bytes 864329343 (864.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5476089  bytes 864329343 (864.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3084308  bytes 714529374 (714.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4145947  bytes 809830230 (809.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5476211  bytes 864347005 (864.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5476211  bytes 864347005 (864.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3084366  bytes 714542853 (714.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4146028  bytes 809844790 (809.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5476336  bytes 864364885 (864.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5476336  bytes 864364885 (864.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3084428  bytes 714557395 (714.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4146118  bytes 809860189 (809.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5476471  bytes 864384641 (864.3 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5476471  bytes 864384641 (864.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3084514  bytes 714575392 (714.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4146223  bytes 809879426 (809.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5476610  bytes 864403419 (864.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5476610  bytes 864403419 (864.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3084597  bytes 714594021 (714.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4146327  bytes 809898527 (809.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5476752  bytes 864423599 (864.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5476752  bytes 864423599 (864.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3084659  bytes 714607965 (714.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4146408  bytes 809913113 (809.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5476868  bytes 864440985 (864.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5476868  bytes 864440985 (864.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3084725  bytes 714625808 (714.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4146502  bytes 809929231 (809.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5476992  bytes 864458881 (864.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5476992  bytes 864458881 (864.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3084794  bytes 714640807 (714.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4146593  bytes 809944613 (809.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5477139  bytes 864479346 (864.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5477139  bytes 864479346 (864.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3084877  bytes 714659265 (714.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4146704  bytes 809964739 (809.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5477276  bytes 864498066 (864.4 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5477276  bytes 864498066 (864.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3084968  bytes 714678409 (714.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4146817  bytes 809984633 (809.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5477422  bytes 864518454 (864.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5477422  bytes 864518454 (864.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3085025  bytes 714692150 (714.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4146896  bytes 809999065 (809.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5477539  bytes 864535892 (864.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5477539  bytes 864535892 (864.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3085079  bytes 714705401 (714.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4146973  bytes 810013365 (810.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5477661  bytes 864553542 (864.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5477661  bytes 864553542 (864.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3085146  bytes 714720164 (714.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4147065  bytes 810028805 (810.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5477805  bytes 864573790 (864.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5477805  bytes 864573790 (864.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3085228  bytes 714738202 (714.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4147169  bytes 810047821 (810.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5477931  bytes 864591830 (864.5 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5477931  bytes 864591830 (864.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3085317  bytes 714757294 (714.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4147279  bytes 810067432 (810.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5478077  bytes 864612219 (864.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5478077  bytes 864612219 (864.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3085373  bytes 714770661 (714.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4147357  bytes 810081817 (810.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5478198  bytes 864629865 (864.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5478198  bytes 864629865 (864.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3085430  bytes 714783968 (714.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4147435  bytes 810096202 (810.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5478315  bytes 864647255 (864.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5478315  bytes 864647255 (864.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3085494  bytes 714798826 (714.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4147521  bytes 810111221 (810.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5478456  bytes 864667326 (864.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5478456  bytes 864667326 (864.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3085575  bytes 714816683 (714.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4147622  bytes 810129981 (810.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5478580  bytes 864685262 (864.6 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5478580  bytes 864685262 (864.6 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3085662  bytes 714835468 (714.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4147730  bytes 810149682 (810.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5478719  bytes 864705277 (864.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5478719  bytes 864705277 (864.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3085719  bytes 714849186 (714.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4147811  bytes 810164302 (810.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5478842  bytes 864722991 (864.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5478842  bytes 864722991 (864.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3085782  bytes 714863047 (714.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4147889  bytes 810178794 (810.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5478953  bytes 864740045 (864.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5478953  bytes 864740045 (864.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3085847  bytes 714877930 (714.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4147979  bytes 810194170 (810.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5479102  bytes 864760555 (864.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5479102  bytes 864760555 (864.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3085931  bytes 714896092 (714.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4148085  bytes 810213334 (810.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5479244  bytes 864779571 (864.7 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5479244  bytes 864779571 (864.7 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3086018  bytes 714915115 (714.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4148195  bytes 810233041 (810.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5479392  bytes 864800109 (864.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5479392  bytes 864800109 (864.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3086077  bytes 714928650 (714.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4148274  bytes 810247449 (810.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5479514  bytes 864817807 (864.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5479514  bytes 864817807 (864.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3086137  bytes 714942392 (714.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4148352  bytes 810261811 (810.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5479628  bytes 864835053 (864.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5479628  bytes 864835053 (864.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3086206  bytes 714957330 (714.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4148442  bytes 810277102 (810.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5479778  bytes 864855673 (864.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5479778  bytes 864855673 (864.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3086282  bytes 714974843 (714.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4148540  bytes 810295641 (810.2 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5479904  bytes 864873749 (864.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5479904  bytes 864873749 (864.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3086368  bytes 714993913 (714.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4148652  bytes 810315515 (810.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5480049  bytes 864894049 (864.8 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5480049  bytes 864894049 (864.8 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3086422  bytes 715007140 (715.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4148726  bytes 810329533 (810.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5480167  bytes 864911539 (864.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5480167  bytes 864911539 (864.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3086473  bytes 715020179 (715.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4148797  bytes 810343385 (810.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5480278  bytes 864928475 (864.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5480278  bytes 864928475 (864.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3086541  bytes 715035107 (715.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4148893  bytes 810359122 (810.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5480427  bytes 864949198 (864.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5480427  bytes 864949198 (864.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3086595  bytes 715048346 (715.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4148971  bytes 810373476 (810.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5480548  bytes 864966860 (864.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5480548  bytes 864966860 (864.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3086702  bytes 715071572 (715.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4149101  bytes 810397262 (810.3 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5480691  bytes 864987093 (864.9 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5480691  bytes 864987093 (864.9 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3086757  bytes 715084870 (715.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4149179  bytes 810411695 (810.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5480816  bytes 865004961 (865.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5480816  bytes 865004961 (865.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3086814  bytes 715098344 (715.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4149257  bytes 810426052 (810.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5480938  bytes 865022623 (865.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5480938  bytes 865022623 (865.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3086882  bytes 715113234 (715.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4149351  bytes 810441623 (810.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5481086  bytes 865043200 (865.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5481086  bytes 865043200 (865.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3086938  bytes 715126625 (715.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4149426  bytes 810455855 (810.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5481194  bytes 865060016 (865.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5481194  bytes 865060016 (865.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3087023  bytes 715145563 (715.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4149538  bytes 810475785 (810.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5481337  bytes 865080280 (865.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5481337  bytes 865080280 (865.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3087106  bytes 715163467 (715.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4149638  bytes 810494575 (810.4 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5481462  bytes 865098308 (865.0 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5481462  bytes 865098308 (865.0 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3087166  bytes 715177062 (715.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4149714  bytes 810508829 (810.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5481579  bytes 865115746 (865.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5481579  bytes 865115746 (865.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
erreur :  [Errno 2] No such file or directory: '/home/nano/.fotonower_config/02102025/counter_photo'
 nb taken pictures : 0
outs: b'eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether 48:b0:2d:3c:dd:df  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n        device interrupt 150  base 0xe000  \n\neth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500\n        inet 192.168.8.100  netmask 255.255.255.0  broadcast 192.168.8.255\n        inet6 fe80::90b4:89e1:1323:722  prefixlen 64  scopeid 0x20<link>\n        ether 0c:5b:8f:27:9a:64  txqueuelen 1000  (Ethernet)\n        RX packets 3087230  bytes 715191580 (715.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 4149800  bytes 810523844 (810.5 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nlo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536\n        inet 127.0.0.1  netmask 255.0.0.0\n        inet6 ::1  prefixlen 128  scopeid 0x10<host>\n        loop  txqueuelen 1  (Local Loopback)\n        RX packets 5481711  bytes 865135337 (865.1 MB)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 5481711  bytes 865135337 (865.1 MB)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nrndis0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:29  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\nusb0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500\n        ether ba:a7:69:f8:42:2b  txqueuelen 1000  (Ethernet)\n        RX packets 0  bytes 0 (0.0 B)\n        RX errors 0  dropped 0  overruns 0  frame 0\n        TX packets 0  bytes 0 (0.0 B)\n        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0\n\n'
/sbin/ifconfig Error : None
 file /home/nano/.log/2025/10/02/classify/new_classify.txt does not exist. All values set to 0.
ip:  192.168.8.100-
First part ok
